linux-toradex.git/drivers/media/common, branch v4.17

media: v4l2-tpg-core.c: add space after %

2018-04-04T10:12:52+00:00

I know, it's a measly space, but I can't stand it since the
V4L2_PIX_FMT_NV24 case before this case does it right.

So add the space in order to restore blessed symmetry and
consistency and to make the world whole again...

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: v4l2-tpg-core: avoid buffer overflows

2018-03-23T10:28:42+00:00

Fix the following warnings:
	drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:1146 gen_twopix() error: buffer overflow 'buf[1]' 8 <= 8
	drivers/media/common/v4l2-tpg/v4l2-tpg-core.c:1152 gen_twopix() error: buffer overflow 'buf[1]' 8 <= 8

Signed-off-by: Mauro Carvalho Chehab

media: siano: Fix coherent memory allocation failure on arm64

2018-03-06T17:46:15+00:00

On some architectures such as arm64, siano chip based TV-tuner
USB devices are not recognized correctly due to coherent memory
allocation failure with the following error:

[  663.556135] usbcore: deregistering interface driver smsusb
[  683.624809] smsusb:smsusb_probe: board id=18, interface number 0
[  683.633530] smsusb:smsusb_init_device: smscore_register_device(...) failed, rc -12
[  683.641501] smsusb:smsusb_probe: Device initialized with return code -12
[  683.652978] smsusb: probe of 1-1:1.0 failed with error -12

This is caused by dma_alloc_coherent(NULL, ...) returning NULL in
smscoreapi.c.

To fix this error, allocate the buffer memory for the USB devices
via kmalloc() and let the USB core do the DMA mapping and free.

Signed-off-by: Tomoki Sekiyama 
Signed-off-by: Mauro Carvalho Chehab

Merge commit 'v4.16-rc4~0' into patchwork

2018-03-05T12:39:06+00:00

* commit 'v4.16-rc4~0': (900 commits)
  Linux 4.16-rc4
  memremap: fix softlockup reports at teardown
  libnvdimm: re-enable deep flush for pmem devices via fsync()
  MAINTAINERS: take over Kconfig maintainership
  vfio: disable filesystem-dax page pinning
  kconfig: fix line number in recursive inclusion error message
  Coccinelle: memdup: Fix typo in warning messages
  i2c: octeon: Prevent error message on bus error
  parisc: Reduce irq overhead when run in qemu
  parisc: Use cr16 interval timers unconditionally on qemu
  parisc: Check if secondary CPUs want own PDC calls
  parisc: Hide virtual kernel memory layout
  parisc: Fix ordering of cache and TLB flushes
  kconfig: Update ncurses package names for menuconfig
  kbuild/kallsyms: trivial typo fix
  kbuild: test --build-id linker flag by ld-option instead of cc-ldoption
  kbuild: drop superfluous GCC_PLUGINS_CFLAGS assignment
  kconfig: Don't leak choice names during parsing
  sh: fix build error for empty CONFIG_BUILTIN_DTB_SOURCE
  kconfig: set SYMBOL_AUTO to the symbol marked with defconfig_list
  ...

media: vb2: Makefile: place vb2-trace together with vb2-core

2018-02-26T16:39:04+00:00

We don't want a separate module for vb2-trace.

That fixes this warning:

	WARNING: modpost: missing MODULE_LICENSE() in drivers/media/common/videobuf2/vb2-trace.o

When building as module.

While here, add a SPDX header.

Reported-by: Stephen Rothwell 
Signed-off-by: Mauro Carvalho Chehab

media: vb2: Fix videobuf2 to map correct area

2018-02-26T13:06:31+00:00

Fixes vb2_vmalloc_get_userptr() to ioremap correct area.
Since the current code does ioremap the page address, if the offset > 0,
it does not do ioremap the last page and results in kernel panic.

This fixes to pass the size + offset to ioremap so that ioremap
can map correct area. Also, this uses __pfn_to_phys() to get the physical
address of given PFN.

Signed-off-by: Masami Hiramatsu 
Reported-by: Takao Orito 
Reported-by: Fumihiro ATSUMI 
Reviewed-by: Marek Szyprowski 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: vb2: core: Finish buffers at the end of the stream

2018-02-26T13:02:52+00:00

If buffers were prepared or queued and the buffers were released without
starting the queue, the finish mem op (corresponding to the prepare mem
op) was never called to the buffers.

Before commit a136f59c0a1f there was no need to do this as in such a case
the prepare mem op had not been called yet. Address the problem by
explicitly calling finish mem op when the queue is stopped if the buffer
is in either prepared or queued state.

Fixes: a136f59c0a1f ("[media] vb2: Move buffer cache synchronisation to prepare from queue")

Cc: stable@vger.kernel.org # for v4.13 and up
Signed-off-by: Sakari Ailus 
Tested-by: Devin Heitmueller 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

media: videobuf2: fix build issues with vb2-trace

2018-02-23T10:13:53+00:00

There was a trouble with vb2-trace: instead of being part of
VB2 core, it was stored at V4L2 videodev. That was wrong,
as it doesn't actually belong to V4L2 core.

Now that vb2 is not part of v4l2-core, its trace functions
should be moved altogether. So, move it to its rightful
place: at videobuf2-core.

That fixes those errors:
	drivers/media/common/videobuf2/videobuf2-core.o: In function `__read_once_size':
	./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue'
	./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_queue'
	./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done'
	./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_buf_done'
	./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf'
	./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_qbuf'
	./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf'
	./include/linux/compiler.h:183: undefined reference to `__tracepoint_vb2_dqbuf'
	drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x10): undefined reference to `__tracepoint_vb2_buf_queue'
	drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x28): undefined reference to `__tracepoint_vb2_buf_done'
	drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x40): undefined reference to `__tracepoint_vb2_qbuf'
	drivers/media/common/videobuf2/videobuf2-core.o:(__jump_table+0x58): undefined reference to `__tracepoint_vb2_dqbuf'

Reported-by: kbuild test robot 
Signed-off-by: Mauro Carvalho Chehab

media: videobuf2: Add VIDEOBUF2_V4L2 Kconfig option for VB2 V4L2 part

2018-02-23T10:12:55+00:00

Videobuf2 is now separate from V4L2 and can be now built without it, at
least in principle --- enabling videobuf2 in kernel configuration attempts
to compile videobuf2-v4l2.c but that will fail if CONFIG_VIDEO_V4L2 isn't
enabled.

Solve this by adding a separate Kconfig option for videobuf2-v4l2 and make
it a separate module as well. This means that drivers now need to choose
both the appropriate videobuf2 memory type
(VIDEOBUF2_{VMALLOC,DMA_CONTIG,DMA_SG}) and VIDEOBUF2_V4L2 if they need
both.

Signed-off-by: Sakari Ailus 
Signed-off-by: Mauro Carvalho Chehab

media: add SPDX license info

2018-02-14T18:17:03+00:00

Replace the old license information with the corresponding SPDX
license for the remaining media drivers that Cisco authored.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab