Geniatech Mygica T230 DVB-T/T2/C USB stick support. Signed-off-by: Evgeny Plehov <EvgenyPlehov@ukr.net> Reviewed-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Needed due to some important regression fixes at RC core. * commit 'v3.18-rc4': (587 commits) Linux 3.18-rc4 ARM: dts: zynq: Enable PL clocks for Parallella tiny: rename ENABLE_DEV_COREDUMP to ALLOW_DEV_COREDUMP tiny: reverse logic for DISABLE_DEV_COREDUMP i2c: core: Dispose OF IRQ mapping at client removal time i2c: at91: don't account as iowait i2c: remove FSF address USB: Update default usb-storage delay_use value in kernel-parameters.txt sysfs: driver core: Fix glue dir race condition by gdp_mutex MIPS: Fix build with binutils 2.24.51+ xfs: track bulkstat progress by agino xfs: bulkstat error handling is broken xfs: bulkstat main loop logic is a mess xfs: bulkstat chunk-formatter has issues xfs: bulkstat chunk formatting cursor is broken xfs: bulkstat btree walk doesn't terminate mm: Fix comment before truncate_setsize() USB: cdc-acm: add quirk for control-line state requests tty: Fix pty master poll() after slave closes v2 MIPS: R3000: Fix debug output for Virtual page number ... Conflicts: drivers/media/rc/rc-main.c
Signed-off-by: Akihiro Tsukada <tskd08@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
It's better to use TS_SC instead of magic number 0xC0. [m.chehab@samsung.com: patch rebased and message rewritten, as this patch conflicted with an already applied patch] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Precedence of & and >> is not the same and is not left to right. shift has higher precedence and should be done after the mask. Add parentheses around the mask. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
As reported by smatch: drivers/media/dvb-core/dvb_frontend.c:1960:45: warning: incorrect type in argument 2 (different address spaces) drivers/media/dvb-core/dvb_frontend.c:1960:45: expected void const [noderef] <asn:1>*from drivers/media/dvb-core/dvb_frontend.c:1960:45: got struct dtv_property *[noderef] <asn:1>props drivers/media/dvb-core/dvb_frontend.c:1992:45: warning: incorrect type in argument 2 (different address spaces) drivers/media/dvb-core/dvb_frontend.c:1992:45: expected void const [noderef] <asn:1>*from drivers/media/dvb-core/dvb_frontend.c:1992:45: got struct dtv_property *[noderef] <asn:1>props drivers/media/dvb-core/dvb_frontend.c:2014:38: warning: incorrect type in argument 1 (different address spaces) drivers/media/dvb-core/dvb_frontend.c:2014:38: expected void [noderef] <asn:1>*to drivers/media/dvb-core/dvb_frontend.c:2014:38: got struct dtv_property *[noderef] <asn:1>props drivers/media/dvb-core/dvb_frontend.c:1946:17: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1947:17: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1951:22: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1951:42: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1954:31: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1960:41: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1960:54: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1965:33: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1978:17: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1979:17: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1983:22: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1983:42: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1986:31: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1992:41: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:1992:54: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:2007:33: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:2014:34: warning: dereference of noderef expression drivers/media/dvb-core/dvb_frontend.c:2014:52: warning: dereference of noderef expression Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Add support for IT930x USB bridge and IT9303 reference design. It is a DVB-T/T2/C tuner with the following components: - IT9303 USB bridge - Si2168-B40 demodulator - Si2147-A30 tuner The IT9303 requires firmware that can be downloaded here: http://trsqr.net/olli/linux/firmwares/it930x/ The Si2168-B40 requires firmware, but the one that is used by PCTV 292e can be used. http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/ The Si2147-A30 tuner does not require firmware loading. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Reviewed-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
There are some patches that depends on media-v3.16-rc6. So, merge back from upstream before applying them. * linus/master: (1123 commits) drm/nouveau: ltc/gf100-: fix cbc issues on certain boards drm/bochs: add missing drm_connector_register call drm/cirrus: add missing drm_connector_register call staging: vt6655: buffer overflow in ioctl USB: storage: Add quirks for Entrega/Xircom USB to SCSI converters USB: storage: Add quirk for Ariston Technologies iConnect USB to SCSI adapter USB: storage: Add quirk for Adaptec USBConnect 2000 USB-to-SCSI Adapter USB: EHCI: unlink QHs even after the controller has stopped [SCSI] fix for bidi use after free [SCSI] fix regression that accidentally disabled block-based tcq [SCSI] libiscsi: fix potential buffer overrun in __iscsi_conn_send_pdu drm/radeon: Fix typo 'addr' -> 'entry' in rs400_gart_set_page drm/nouveau/runpm: fix module unload drm/radeon/px: fix module unload vgaswitcheroo: add vga_switcheroo_fini_domain_pm_ops drm/radeon: don't reset dma on r6xx-evergreen init drm/radeon: don't reset sdma on CIK init drm/radeon: don't reset dma on NI/SI init drm/radeon/dpm: fix resume on mullins drm/radeon: Disable HDP flush before every CS again for < r600 ...
Sparse is complaining about ngene's bad usage of a __user ptr: >> drivers/media/pci/ngene/ngene-dvb.c:62:48: sparse: incorrect type in argument 2 (different address spaces) drivers/media/pci/ngene/ngene-dvb.c:62:48: expected unsigned char const [usertype] *buf drivers/media/pci/ngene/ngene-dvb.c:62:48: got char const [noderef] <asn:1>*buf As this is intercepting a .write() file ops, we can't just memcpy. We need to use copy_from_user. Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
add the following IDs USB_PID_PCTV_78E (0x025a) for PCTV 78e USB_PID_PCTV_79E (0x0262) for PCTV 79e For these it9135 devices. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Cc: Antti Palosaari <crope@iki.fi> Cc: <stable@vger.kernel.org> # v3.14+ Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>