linux-toradex.git/drivers/media/dvb-frontends, branch v4.19

Merge branch 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

2018-08-22T00:40:46+00:00

Pull i2c updates from Wolfram Sang:

 - the core has now a lockless variant of i2c_smbus_xfer. Some open
   coded versions of this got removed in drivers. This also enables
   proper SCCB support in regmap.

 - locking got a more precise naming. i2c_{un}lock_adapter() had to go,
   and we know use i2c_lock_bus() consistently with flags like
   I2C_LOCK_ROOT_ADAPTER and I2C_LOCK_SEGMENT to avoid ambiguity.

 - the gpio fault injector got a new delicate testcase

 - the bus recovery procedure got fixed to handle the new testcase
   correctly

 - a new quirk flag for controllers not able to handle zero length
   messages together with driver updates to use it

 - new drivers: FSI bus attached I2C masters, GENI I2C controller, Owl
   family S900

 - and a good set of driver improvements and bugfixes

* 'i2c/for-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (77 commits)
  i2c: rcar: implement STOP and REP_START according to docs
  i2c: rcar: refactor private flags
  i2c: core: ACPI: Make acpi_gsb_i2c_read_bytes() check i2c_transfer return value
  i2c: core: ACPI: Properly set status byte to 0 for multi-byte writes
  dt-bindings: i2c: rcar: Add r8a774a1 support
  dt-bindings: i2c: sh_mobile: Add r8a774a1 support
  i2c: imx: Simplify stopped state tracking
  i2c: imx: Fix race condition in dma read
  i2c: pasemi: remove hardcoded bus numbers on smbus
  i2c: designware: Add SPDX license tag
  i2c: designware: Convert to use struct i2c_timings
  i2c: core: Parse SDA hold time from firmware
  i2c: designware-pcidrv: Mark expected switch fall-through
  i2c: amd8111: Mark expected switch fall-through
  i2c: sh_mobile: use core to detect 'no zero length read' quirk
  i2c: xlr: use core to detect 'no zero length' quirk
  i2c: rcar: use core to detect 'no zero length' quirk
  i2c: stu300: use core to detect 'no zero length' quirk
  i2c: pmcmsp: use core to detect 'no zero length' quirk
  i2c: mxs: use core to detect 'no zero length' quirk
  ...

media: drxj: get rid of uneeded casts

2018-08-08T14:57:14+00:00

Instead of doing casts, use %zd to print sizes, in order to make
smatch happier:
	drivers/media/dvb-frontends/drx39xyj/drxj.c:11814 drx_ctrl_u_code() warn: argument 4 to %u specifier is cast from pointer
	drivers/media/dvb-frontends/drx39xyj/drxj.c:11845 drx_ctrl_u_code() warn: argument 3 to %u specifier is cast from pointer
	drivers/media/dvb-frontends/drx39xyj/drxj.c:11869 drx_ctrl_u_code() warn: argument 3 to %u specifier is cast from pointer
	drivers/media/dvb-frontends/drx39xyj/drxj.c:11878 drx_ctrl_u_code() warn: argument 3 to %u specifier is cast from pointer

Signed-off-by: Mauro Carvalho Chehab

media: cleanup fall-through comments

2018-08-08T14:57:14+00:00

As Ian pointed out, adding a '-' to the fallthrough seems to meet
the regex requirements at level 3 of the warning, at least when
the comment fits into a single line.

So, replace by a single line the comments that were broken into
multiple lines just to make gcc -Wimplicit-fallthrough=3 happy.

Suggested-by: Ian Arkver 
Signed-off-by: Mauro Carvalho Chehab

media: dvb-frontends: rtl2832_sdr: Replace GFP_ATOMIC with GFP_KERNEL

2018-08-02T23:10:56+00:00

rtl2832_sdr_submit_urbs(), rtl2832_sdr_alloc_stream_bufs(), and
rtl2832_sdr_alloc_urbs() are never called in atomic context.
They call usb_submit_urb(), usb_alloc_coherent() and usb_alloc_urb()
with GFP_ATOMIC, which is not necessary.
GFP_ATOMIC can be replaced with GFP_KERNEL.

This is found by a static analysis tool named DCNS written by myself.

Signed-off-by: Jia-Ju Bai 
Signed-off-by: Mauro Carvalho Chehab

media: dvb-frontends: add Socionext MN88443x ISDB-S/T demodulator driver

2018-08-02T22:54:03+00:00

This patch adds a frontend driver for the Socionext/Panasonic
MN884434 and MN884433 ISDB-S/T demodulators.

The maximum and minimum frequency of MN88443x comes from
ISDB-S and ISDB-T so frequency range is the following:
  - ISDB-S (BS/CS110 IF frequency, Local freq 10.678GHz)
    - Min: BS-1: 1032MHz
    - Max: ND24: 2070MHz
  - ISDB-T
    - Min: ch13: 470MHz
    - Max: ch62: 770MHz

Signed-off-by: Katsuhiro Suzuki 
Signed-off-by: Mauro Carvalho Chehab

media: helene: add I2C device probe function

2018-08-02T22:53:42+00:00

This patch adds I2C probe function to use dvb_module_probe() with
this driver. And also support multiple delivery systems at the
same device.

Signed-off-by: Katsuhiro Suzuki 
Signed-off-by: Mauro Carvalho Chehab

media: dvb: represent min/max/step/tolerance freqs in Hz

2018-08-02T22:10:48+00:00

Right now, satellite frontend drivers specify frequencies in kHz,
while terrestrial/cable ones specify in Hz. That's confusing
for developers.

However, the main problem is that universal frontends capable
of handling both satellite and non-satelite delivery systems
are appearing. We end by needing to hack the drivers in
order to support such hybrid frontends.

So, convert everything to specify frontend frequencies in Hz.

Tested-by: Katsuhiro Suzuki 
Signed-off-by: Mauro Carvalho Chehab

media: dvb: convert tuner_info frequencies to Hz

2018-08-02T20:14:50+00:00

Right now, satellite tuner drivers specify frequencies in kHz,
while terrestrial/cable ones specify in Hz. That's confusing
for developers.

However, the main problem is that universal tuners capable
of handling both satellite and non-satelite delivery systems
are appearing. We end by needing to hack the drivers in
order to support such hybrid tuners.

So, convert everything to specify tuner frequencies in Hz.

Plese notice that a similar patch is also needed for frontends.

Tested-by: Katsuhiro Suzuki 
Acked-by: Michael Büsch 
Signed-off-by: Mauro Carvalho Chehab

media: dvb-frontends/tda18271c2dd: fix handling of DVB-T parameters

2018-07-30T20:23:12+00:00

Add a break statement in set_params() for the SYS_DVBT(2).

As reported by gcc:

    drivers/media/dvb-frontends/tda18271c2dd.c:1144:3: warning: this statement may fall through [-Wimplicit-fallthrough=]

There is a nested switch() inside the code with sets the tuner to
the right standard. Without the break, the code will always set to
DVB-C mode, with can be sub-optimal for DVB-T.

Signed-off-by: Daniel Scheller 
Signed-off-by: Mauro Carvalho Chehab

media: dvb-frontends/stv0910: cast the BER denominator shift exp to ULL

2018-07-30T20:23:12+00:00

To avoid miscalculations related to the BER denominator, the shift
expression needs to be casted as ULL.

Picked up from the upstream dddvb GIT.

Signed-off-by: Daniel Scheller 
Signed-off-by: Mauro Carvalho Chehab