linux-toradex.git/drivers/media/dvb, branch tegra

dib0700: protect the dib0700 buffer access

2011-11-11T17:43:28+00:00

commit bff469f4167fdabfe15294f375577d7eadbaa1bb upstream.

This patch protects the common buffer access inside the dib0700 in order
to manage concurrent access. This protection is done using mutex.

Cc: Mauro Carvalho Chehab 
Cc: Florian Mickler 
Signed-off-by: Javier Marcet 
Signed-off-by: Olivier Grenie 
Signed-off-by: Patrick Boettcher 
[mchehab@redhat.com: dprint requires 3 arguments. Replaced by dib_info]
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

DiBcom: protect the I2C bufer access

2011-11-11T17:43:27+00:00

commit 79fcce3230b140f7675f8529ee53fe2f9644f902 upstream.

This patch protects the I2C buffer access in order to manage concurrent
access. This protection is done using mutex.
Furthermore, for the dib9000, if a pid filtering command is
received during the tuning, this pid filtering command is delayed to
avoid any concurrent access issue.

Cc: Mauro Carvalho Chehab 
Cc: Florian Mickler 
Signed-off-by: Olivier Grenie 
Signed-off-by: Patrick Boettcher 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

[media] vp7045: fix buffer setup

2011-09-11T12:33:41+00:00

dvb_usb_device_init calls the frontend_attach method of this driver which
uses vp7045_usb_ob. In order to have a buffer ready in vp7045_usb_op, it has to
be allocated before that happens.

Luckily we can use the whole private data as the buffer as it gets separately
allocated on the heap via kzalloc in dvb_usb_device_init and is thus apt for
use via usb_control_msg.

This fixes a
	BUG: unable to handle kernel paging request at 0000000000001e78

reported by Tino Keitel and diagnosed by Dan Carpenter.

Cc: stable@kernel.org # For v3.0 and upper
Tested-by: Tino Keitel 
Signed-off-by: Florian Mickler 
Signed-off-by: Mauro Carvalho Chehab

Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6

2011-07-30T07:08:53+00:00

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (430 commits)
  [media] ir-mce_kbd-decoder: include module.h for its facilities
  [media] ov5642: include module.h for its facilities
  [media] em28xx: Fix DVB-C maxsize for em2884
  [media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz
  [media] v4l: mt9v032: Fix Bayer pattern
  [media] V4L: mt9m111: rewrite set_pixfmt
  [media] V4L: mt9m111: fix missing return value check mt9m111_reg_clear
  [media] V4L: initial driver for ov5642 CMOS sensor
  [media] V4L: sh_mobile_ceu_camera: fix Oops when USERPTR mapping fails
  [media] V4L: soc-camera: remove soc-camera bus and devices on it
  [media] V4L: soc-camera: un-export the soc-camera bus
  [media] V4L: sh_mobile_csi2: switch away from using the soc-camera bus notifier
  [media] V4L: add media bus configuration subdev operations
  [media] V4L: soc-camera: group struct field initialisations together
  [media] V4L: soc-camera: remove now unused soc-camera specific PM hooks
  [media] V4L: pxa-camera: switch to using standard PM hooks
  [media] NetUP Dual DVB-T/C CI RF: force card hardware revision by module param
  [media] Don't OOPS if videobuf_dvb_get_frontend return NULL
  [media] NetUP Dual DVB-T/C CI RF: load firmware according card revision
  [media] omap3isp: Support configurable HS/VS polarities
  ...

Fix up conflicts:
 - arch/arm/mach-omap2/board-rx51-peripherals.c:
     cleanup regulator supply definitions in mach-omap2
   vs
     OMAP3: RX-51: define vdds_csib regulator supply
 - drivers/staging/tm6000/tm6000-alsa.c (trivial)

[media] tda18271c2dd: Fix saw filter configuration for DVB-C @6MHz

2011-07-28T20:09:46+00:00

Currently, the driver assumes that all QAM carriers are spaced with
8MHz. This is wrong, and may decrease QoS on Countries like Brazil,
that have DVB-C carriers with 6MHz-spaced.

Fortunately, both ITU-T J-83 and EN 300 429 specifies a way to
associate the symbol rate with the bandwidth needed for it.

For ITU-T J-83 2007 annex A, the maximum symbol rate for 6 MHz is:
	6 MHz / 1.15 = 5217391 Bauds
For  ITU-T J-83 2007 annex C, the maximum symbol rate for 6 MHz is:
	6 MHz / 1.13 = 5309735 Bauds.

As this tuner is currently used only for DRX-K, and it is currently
hard-coded to annex A, I've opted to use the roll-off factor of 0.15,
instead of 0.13.

If we ever support annex C, the better would be to add a DVB S2API
call to allow changing between Annex A and C, and add the 0.13 roll-off
factor to it.

This code is currently being used on other frontends, so I think we
should later add a core function with this code, to warrant that
it will be properly implemented everywhere.

Signed-off-by: Mauro Carvalho Chehab

[media] au8522: set signal field to 100% when signal present

2011-07-27T20:56:05+00:00

The signal state field in G_TUNER is typically scaled from 0-100%.  Since we
don't know the signal level, we really would prefer the field to contain 100%
than 1/256, which in many utilities (such as v4l2-ctl) rounds to 0% even when
a signal is actually present.

This patch makes the behavior consistent with other drivers.

Signed-off-by: Devin Heitmueller 
Signed-off-by: Mauro Carvalho Chehab

[media] drxk: Fix the logic that selects between DVB-C annex A and C

2011-07-27T20:56:04+00:00

Fix the DRX-K logic that selects between DVB-C annex A and C

Fix a typo where DVB-C annex type is set via setEnvParameters, but
the driver, uses, instead, setParamParameters[2].

While here, cleans up the code, fixing a bad identation at the fallback
code for other types of firmware, and put the multiple-line comments
into the Linux CodingStyle.

Acked-by: Oliver Endriss 
Signed-off-by: Mauro Carvalho Chehab

[media] drxk: Fix read debug message

2011-07-27T20:56:03+00:00

Signed-off-by: Mauro Carvalho Chehab

[media] drxk: Fix error return code during drxk init

2011-07-27T20:56:03+00:00

Signed-off-by: Mauro Carvalho Chehab

[media] drxk: Remove goto/break after return

2011-07-27T20:56:03+00:00

After return, we don't need any other statement to change the
function flux ;)

Reported-by: Oliver Endriss 
Signed-off-by: Mauro Carvalho Chehab