linux-toradex.git/drivers/media/pci/saa7134, branch master Linux kernel for Apalis and Colibri modules media: rc: fix race between unregister and urb/irq callbacks 2026-03-17T13:43:56+00:00 Sean Young sean@mess.org 2025-12-20T10:33:26+00:00 dccc0c3ddf8f16071736f98a7d6dd46a2d43e037 Some rc device drivers have a race condition between rc_unregister_device() and irq or urb callbacks. This is because rc_unregister_device() does two things, it marks the device as unregistered so no new commands can be issued and then it calls rc_free_device(). This means the driver has no chance to cancel any pending urb callbacks or interrupts after the device has been marked as unregistered. Those callbacks may access struct rc_dev or its members (e.g. struct ir_raw_event_ctrl), which have been freed by rc_free_device(). This change removes the implicit call to rc_free_device() from rc_unregister_device(). This means that device drivers can call rc_unregister_device() in their remove or disconnect function, then cancel all the urbs and interrupts before explicitly calling rc_free_device(). Note this is an alternative fix for an issue found by Haotian Zhang, see the Closes: tags. Reported-by: Haotian Zhang <vulab@iscas.ac.cn> Closes: https://lore.kernel.org/linux-media/20251114101432.2566-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114101418.2548-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114101346.2530-1-vulab@iscas.ac.cn/ Closes: https://lore.kernel.org/linux-media/20251114090605.2413-1-vulab@iscas.ac.cn/ Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> 
Some rc device drivers have a race condition between rc_unregister_device()
and irq or urb callbacks. This is because rc_unregister_device() does two
things, it marks the device as unregistered so no new commands can be
issued and then it calls rc_free_device(). This means the driver has no
chance to cancel any pending urb callbacks or interrupts after the device
has been marked as unregistered. Those callbacks may access struct rc_dev
or its members (e.g. struct ir_raw_event_ctrl), which have been freed by
rc_free_device().

This change removes the implicit call to rc_free_device() from
rc_unregister_device(). This means that device drivers can call
rc_unregister_device() in their remove or disconnect function, then cancel
all the urbs and interrupts before explicitly calling rc_free_device().

Note this is an alternative fix for an issue found by Haotian Zhang, see
the Closes: tags.

Reported-by: Haotian Zhang <vulab@iscas.ac.cn>
Closes: https://lore.kernel.org/linux-media/20251114101432.2566-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101418.2548-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114101346.2530-1-vulab@iscas.ac.cn/
Closes: https://lore.kernel.org/linux-media/20251114090605.2413-1-vulab@iscas.ac.cn/
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
media: saa7134: rename i2c_dbg() to saa7134_i2c_dbg() 2026-03-16T15:30:20+00:00 Bartosz Golaszewski bartosz.golaszewski@oss.qualcomm.com 2026-02-23T08:59:30+00:00 c42c596a85e53560e6c4db5c74854d3b259c23e0 Ahead of introducing I2C-adapter-specific printk() helpers, preemptively avoid a conflict with the upcoming i2c_dbg() and rename the local macro in the saa7134 driver to saa7134_i2c_dbg(). Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com> Acked-by: Hans Verkuil <hverkuil+cisco@kernel.org> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> 
Ahead of introducing I2C-adapter-specific printk() helpers, preemptively
avoid a conflict with the upcoming i2c_dbg() and rename the local macro
in the saa7134 driver to saa7134_i2c_dbg().

Suggested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Acked-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Convert 'alloc_obj' family to use the new default GFP_KERNEL argument 2026-02-22T01:09:51+00:00 Linus Torvalds torvalds@linux-foundation.org 2026-02-22T00:37:42+00:00 bf4afc53b77aeaa48b5409da5c8da6bb4eff7f43 This was done entirely with mindless brute force, using git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' | xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/' to convert the new alloc_obj() users that had a simple GFP_KERNEL argument to just drop that argument. Note that due to the extreme simplicity of the scripting, any slightly more complex cases spread over multiple lines would not be triggered: they definitely exist, but this covers the vast bulk of the cases, and the resulting diff is also then easier to check automatically. For the same reason the 'flex' versions will be done as a separate conversion. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
treewide: Replace kmalloc with kmalloc_obj for non-scalar types 2026-02-21T09:02:28+00:00 Kees Cook kees@kernel.org 2026-02-21T07:49:23+00:00 69050f8d6d075dc01af7a5f2f550a8067510366f This is the result of running the Coccinelle script from scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to avoid scalar types (which need careful case-by-case checking), and instead replace kmalloc-family calls that allocate struct or union object instances: Single allocations: kmalloc(sizeof(TYPE), ...) are replaced with: kmalloc_obj(TYPE, ...) Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...) are replaced with: kmalloc_objs(TYPE, COUNT, ...) Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...) are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...) (where TYPE may also be *VAR) The resulting allocations no longer return "void *", instead returning "TYPE *". Signed-off-by: Kees Cook <kees@kernel.org> 
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>
media: v4l2: Rename second ioctl handlers argument to 'void *priv' 2025-08-13T06:34:01+00:00 Laurent Pinchart laurent.pinchart+renesas@ideasonboard.com 2025-08-10T01:30:57+00:00 5396f5ae0e7b210ee5098c257ccb1c3fdd4bd04f The second argument to the ioctl handlers is not a file handle any more. The standard practice is to name it 'void *priv' in drivers. Many drivers still name it 'void *fh', and a few use more exotic names. Replace those more exotic names with 'void *priv' in all media drivers. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Jai Luthra <jai.luthra@linux.dev> Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org> 
The second argument to the ioctl handlers is not a file handle any more.
The standard practice is to name it 'void *priv' in drivers. Many
drivers still name it 'void *fh', and a few use more exotic names.
Replace those more exotic names with 'void *priv' in all media drivers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Jai Luthra <jai.luthra@linux.dev>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
treewide, timers: Rename from_timer() to timer_container_of() 2025-06-08T07:07:37+00:00 Ingo Molnar mingo@kernel.org 2025-05-09T05:51:14+00:00 41cb08555c4164996d67c78b3bf1c658075b75f1 Move this API to the canonical timer_*() namespace. [ tglx: Redone against pre rc1 ] Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com 
Move this API to the canonical timer_*() namespace.

[ tglx: Redone against pre rc1 ]

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
treewide: Switch/rename to timer_delete[_sync]() 2025-04-05T08:30:12+00:00 Thomas Gleixner tglx@linutronix.de 2025-04-05T08:17:26+00:00 8fa7292fee5c5240402371ea89ab285ec856c916 timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree over and remove the historical wrapper inlines. Conversion was done with coccinelle plus manual fixups where necessary. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org> 
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.

Conversion was done with coccinelle plus manual fixups where necessary.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
media: pci: drop vb2_ops_wait_prepare/finish 2024-10-28T08:19:53+00:00 Hans Verkuil hverkuil@xs4all.nl 2024-10-14T15:06:30+00:00 bde5d79d00255db609fe9d859eef8c7b6d38b137 Since commit 88785982a19d ("media: vb2: use lock if wait_prepare/finish are NULL") it is no longer needed to set the wait_prepare/finish vb2_ops callbacks as long as the lock field in vb2_queue is set. Since the vb2_ops_wait_prepare/finish callbacks already rely on that field, we can safely drop these callbacks. This simplifies the code and this is a step towards the goal of deleting these callbacks. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> 
Since commit 88785982a19d ("media: vb2: use lock if wait_prepare/finish
are NULL") it is no longer needed to set the wait_prepare/finish
vb2_ops callbacks as long as the lock field in vb2_queue is set.

Since the vb2_ops_wait_prepare/finish callbacks already rely on that field,
we can safely drop these callbacks.

This simplifies the code and this is a step towards the goal of deleting
these callbacks.

Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Merge tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media 2024-07-18T01:30:10+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-07-18T01:30:10+00:00 b1bc554e009e3aeed7e4cfd2e717c7a34a98c683 Pull media updates from Mauro Carvalho Chehab: - New sensor drivers: gc05a2, gc08a3 and imx283 - New serializer/deserializer drivers: max96714 and max96717 - New JPEG encoder driver: e5010 - Support for Raspberry Pi PiSP Backend (BE) ISP driver - Old documentation for av7110 driver removed, as a new version was added as Documentation/userspace-api/media/dvb/legacy*.rst - atompisp: Linux firmwares are now available, so drop firmware-related task from TODO and update firmware logic - The imx258 driver has gained several improvements - wave5 driver has gained support for HEVC decoding - em28xx gained support for MyGica UTV3 - av7110 budget-patch driver removed - Lots of other cleanups, improvements and fixes * tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (301 commits) media: raspberrypi: Switch to remove_new media: uapi: pisp_be_config: Add extra config fields media: uapi: pisp_be_config: Re-sort pisp_be_tiles_config media: uapi: pisp_common: Capitalize all macros media: uapi: pisp_common: Add 32 bpp format test media: uapi: pisp_be_config: Drop BIT() from uAPI media: stm32: dcmipp: correct error handling in dcmipp_create_subdevs media: atomisp: Fix spelling mistakes in sh_css_sp.c media: atomisp: Fix spelling mistake in ia_css_debug.c media: atomisp: Fix spelling mistake in hmm_bo.c media: atomisp: Fix spelling mistake in ia_css_eed1_8.host.c media: atomisp: Fix spelling mistake in sh_css_internal.h media: atomisp: Fix spelling mistake "pipline" -> "pipeline" media: atomisp: Remove unused GPIO related defines and APIs media: atomisp: Replace COMPILATION_ERROR_IF() by static_assert() media: atomisp: Clean up unused macros from math_support.h media: atomisp: csi2-bridge: Add DMI quirk for OV5693 on Xiaomi Mipad2 media: atomisp: Update TODO media: atomisp: Prefix firmware paths with "intel/ipu/" media: atomisp: Remove firmware_name module parameter ... 
Pull media updates from Mauro Carvalho Chehab:

 - New sensor drivers: gc05a2, gc08a3 and imx283

 - New serializer/deserializer drivers: max96714 and max96717

 - New JPEG encoder driver: e5010

 - Support for Raspberry Pi PiSP Backend (BE) ISP driver

 - Old documentation for av7110 driver removed, as a new version was
   added as Documentation/userspace-api/media/dvb/legacy*.rst

 - atompisp: Linux firmwares are now available, so drop firmware-related
   task from TODO and update firmware logic

 - The imx258 driver has gained several improvements

 - wave5 driver has gained support for HEVC decoding

 - em28xx gained support for MyGica UTV3

 - av7110 budget-patch driver removed

 - Lots of other cleanups, improvements and fixes

* tag 'media/v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (301 commits)
  media: raspberrypi: Switch to remove_new
  media: uapi: pisp_be_config: Add extra config fields
  media: uapi: pisp_be_config: Re-sort pisp_be_tiles_config
  media: uapi: pisp_common: Capitalize all macros
  media: uapi: pisp_common: Add 32 bpp format test
  media: uapi: pisp_be_config: Drop BIT() from uAPI
  media: stm32: dcmipp: correct error handling in dcmipp_create_subdevs
  media: atomisp: Fix spelling mistakes in sh_css_sp.c
  media: atomisp: Fix spelling mistake in ia_css_debug.c
  media: atomisp: Fix spelling mistake in hmm_bo.c
  media: atomisp: Fix spelling mistake in ia_css_eed1_8.host.c
  media: atomisp: Fix spelling mistake in sh_css_internal.h
  media: atomisp: Fix spelling mistake "pipline" -> "pipeline"
  media: atomisp: Remove unused GPIO related defines and APIs
  media: atomisp: Replace COMPILATION_ERROR_IF() by static_assert()
  media: atomisp: Clean up unused macros from math_support.h
  media: atomisp: csi2-bridge: Add DMI quirk for OV5693 on Xiaomi Mipad2
  media: atomisp: Update TODO
  media: atomisp: Prefix firmware paths with "intel/ipu/"
  media: atomisp: Remove firmware_name module parameter
  ...
media: saa7134: add missing MODULE_DESCRIPTION() macros 2024-06-15T08:49:20+00:00 Jeff Johnson quic_jjohnson@quicinc.com 2024-06-09T21:58:06+00:00 c22010cee935a433359a9671f402792528ba21c8 make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-empress.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-go7007.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-alsa.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-dvb.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> 
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-empress.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-go7007.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-alsa.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/pci/saa7134/saa7134-dvb.o

Add the missing invocations of the MODULE_DESCRIPTION() macro.

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>