Pull media updates from Mauro Carvalho Chehab:

 - new CSI tegra support, covering Tegra20 and Tegra30

 - new camera sensor drivers: T4ka3 and ov2732

 - m88ds3103: add 3103c chip support

 - uvcvideo: add support for Intel RealSense D436/D555 and P010 pixel format

 - synopsys csi2rx: add i.MX93 support

 - imx8-isi: add i.MX95 support

 - imx8mq-mipi-csi2: add i.MX8ULP support

 - dw100: add V4L2 requests support

 - support for DTV devices from Hauppauge got some improvements

 - media staging: dropped starfive-camss driver

 - media docs: document multi-committers model and improve maint profile

 - media core:
    - add v4l2_subdev_get_frame_desc_passthrough() helper
    - improve error handling in fwnode parsing

 - lots of driver fixes, cleanups and improvements

* tag 'media/v7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (251 commits)
  Revert "media: cx231xx: add USB ID 2040:8360 for Hauppauge WinTV-HVR-935"
  media: synopsys: csi2rx: add i.MX93 support
  media: dt-bindings: add NXP i.MX93 compatible string
  media: synopsys: csi2rx: Use enum and u32 array for register offsets
  media: synopsys: csi2rx: implement .get_frame_desc() callback
  media: synopsys: csi2rx: only check errors from devm_clk_bulk_get_all()
  media: synopsys: csi2rx: use devm_reset_control_get_optional_exclusive()
  media: i2c: imx283: add support for non-continuous MIPI clock mode
  media: i2c: ov08d10: add support for 24 MHz input clock
  media: i2c: ov08d10: add support for reset and power management
  media: i2c: ov08d10: add support for binding via device tree
  dt-bindings: media: i2c: document Omnivision OV08D10 CMOS image sensor
  media: i2c: ov08d10: add missing newline to prints
  media: i2c: ov08d10: fix some typos in comments
  media: i2c: ov08d10: remove duplicate register write
  media: i2c: ov08d10: fix image vertical start setting
  media: i2c: ov08d10: fix runtime PM handling in probe
  staging: media: ipu7: Update TODO
  media: Add t4ka3 camera sensor driver
  media: i2c: Add ov2732 image sensor driver
  ...

Fix "ERROR: modpost: "phy_mipi_dphy_get_default_config_for_hsclk"
[drivers/media/platform/synopsys/dw-mipi-csi2rx.ko] undefined!" by
selecting GENERIC_PHY_MIPI_DPHY in the Kconfig entry.

Fixes: 355a11004066 ("media: synopsys: add driver for the designware mipi csi-2 receiver")
Cc: stable@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602130253.BZnVd4jh-lkp@intel.com/
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The Synopsys DesignWare MIPI CSI-2 Receiver is currently only supported
on Rockchip RK3568 SoCs.  Hence add a dependency on ARCH_ROCKCHIP, to
prevent asking the user about this driver when configuring a kernel
without Rockchip platform support.

The dependency can be relaxed later, when adding support for appropriate
SoCs from other vendors (if any).

Fixes: 355a110040665e43 ("media: synopsys: add driver for the designware mipi csi-2 receiver")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Michael Riesch <michael.riesch@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The Synopsys DesignWare MIPI CSI-2 Receiver is a CSI-2 bridge with
one input port and one output port. It receives the data with the
help of an external MIPI PHY (C-PHY or D-PHY) and passes it to e.g.,
the Rockchip Video Capture (VICAP) block on recent Rockchip SoCs.

Add a V4L2 subdevice driver for this unit.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Michael Riesch <michael.riesch@collabora.com>
[Sakari Ailus: Make sparse and smatch happy.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

Add initial support for the Synopsys DesignWare HDMI RX
Controller Driver used by Rockchip RK3588. The driver
supports:
 - HDMI 1.4b and 2.0 modes (HDMI 4k@60Hz)
 - RGB888, YUV422, YUV444 and YCC420 pixel formats
 - CEC
 - EDID configuration

The hardware also has Audio and HDCP capabilities, but these are
not yet supported by the driver.

Co-developed-by: Dingxian Wen <shawn.wen@rock-chips.com>
Signed-off-by: Dingxian Wen <shawn.wen@rock-chips.com>
Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>