linux-toradex.git/drivers/media/platform, branch v4.14 Linux kernel for Apalis and Colibri modules License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02T10:10:55+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-11-01T14:07:57+00:00 b24413180f5600bcb3bb70fbed5cf186b60864bd Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge tag 'media/v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media 2017-10-17T10:23:09+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-10-17T10:23:09+00:00 3728e6a255b50382591ee374c70e6f5276a47d0a Pull media fixes from Mauro Carvalho Chehab: "Core fixes: - cec: Respond to unregistered initiators, when applicable - dvb_frontend: only use kref after initialized Driver-specific fixes: - qcom, camss: Make function vfe_set_selection static - qcom: VIDEO_QCOM_CAMSS should depend on HAS_DMA - s5p-cec: add NACK detection support - media: staging/imx: Fix uninitialized variable warning - dib3000mc: i2c transfers over usb cannot be done from stack - venus: init registered list on streamoff" * tag 'media/v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: dvb_frontend: only use kref after initialized media: platform: VIDEO_QCOM_CAMSS should depend on HAS_DMA media: cec: Respond to unregistered initiators, when applicable media: s5p-cec: add NACK detection support media: staging/imx: Fix uninitialized variable warning media: qcom: camss: Make function vfe_set_selection static media: venus: init registered list on streamoff media: dvb: i2c transfers over usb cannot be done from stack 
Pull media fixes from Mauro Carvalho Chehab:
 "Core fixes:
   - cec: Respond to unregistered initiators, when applicable
   - dvb_frontend: only use kref after initialized

  Driver-specific fixes:
   - qcom, camss: Make function vfe_set_selection static
   - qcom: VIDEO_QCOM_CAMSS should depend on HAS_DMA
   - s5p-cec: add NACK detection support
   - media: staging/imx: Fix uninitialized variable warning
   - dib3000mc: i2c transfers over usb cannot be done from stack
   - venus: init registered list on streamoff"

* tag 'media/v4.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: dvb_frontend: only use kref after initialized
  media: platform: VIDEO_QCOM_CAMSS should depend on HAS_DMA
  media: cec: Respond to unregistered initiators, when applicable
  media: s5p-cec: add NACK detection support
  media: staging/imx: Fix uninitialized variable warning
  media: qcom: camss: Make function vfe_set_selection static
  media: venus: init registered list on streamoff
  media: dvb: i2c transfers over usb cannot be done from stack
media: platform: VIDEO_QCOM_CAMSS should depend on HAS_DMA 2017-09-23T18:57:21+00:00 Geert Uytterhoeven geert@linux-m68k.org 2017-09-11T12:35:36+00:00 db6321a1af8432df983048d2dd8529525589f71d If NO_DMA=y: warning: (TOUCHSCREEN_SUR40 && VIDEO_TW68 && VIDEO_CX23885 && VIDEO_CX25821 && VIDEO_CX88 && VIDEO_SAA7134 && VIDEO_COBALT && VIDEO_QCOM_CAMSS) selects VIDEOBUF2_DMA_SG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA) and ERROR: "bad_dma_ops" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined! ERROR: "bad_dma_ops" [drivers/media/platform/qcom/camss-8x16/qcom-camss.ko] undefined! VIDEO_QCOM_CAMSS selects VIDEOBUF2_DMA_SG, which bypasses its dependency on HAS_DMA. Make VIDEO_QCOM_CAMSS depend on HAS_DMA to fix this. Fixes: f5c074947f56533c ("media: camss: Enable building") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> 
If NO_DMA=y:

    warning: (TOUCHSCREEN_SUR40 && VIDEO_TW68 && VIDEO_CX23885 && VIDEO_CX25821 && VIDEO_CX88 && VIDEO_SAA7134 && VIDEO_COBALT && VIDEO_QCOM_CAMSS) selects VIDEOBUF2_DMA_SG which has unmet direct dependencies (MEDIA_SUPPORT && HAS_DMA)

and

    ERROR: "bad_dma_ops" [drivers/media/v4l2-core/videobuf2-dma-sg.ko] undefined!
    ERROR: "bad_dma_ops" [drivers/media/platform/qcom/camss-8x16/qcom-camss.ko] undefined!

VIDEO_QCOM_CAMSS selects VIDEOBUF2_DMA_SG, which bypasses its dependency
on HAS_DMA.  Make VIDEO_QCOM_CAMSS depend on HAS_DMA to fix this.

Fixes: f5c074947f56533c ("media: camss: Enable building")

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
media: s5p-cec: add NACK detection support 2017-09-23T11:29:30+00:00 Hans Verkuil hverkuil@xs4all.nl 2017-08-31T16:56:10+00:00 e949f61461ab83b094cad564c89a8d2b078b4508 The s5p-cec driver returned CEC_TX_STATUS_ERROR for the NACK condition. Some digging into the datasheet uncovered the S5P_CEC_TX_STAT1 register where bit 0 indicates if the transmit was nacked or not. Use this to return the correct CEC_TX_STATUS_NACK status to userspace. This was the only driver that couldn't tell a NACK from another error, and that was very unusual. And a potential problem for applications as well. Tested with my Odroid-U3. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 
The s5p-cec driver returned CEC_TX_STATUS_ERROR for the NACK condition.

Some digging into the datasheet uncovered the S5P_CEC_TX_STAT1 register where
bit 0 indicates if the transmit was nacked or not.

Use this to return the correct CEC_TX_STATUS_NACK status to userspace.

This was the only driver that couldn't tell a NACK from another error, and
that was very unusual. And a potential problem for applications as well.

Tested with my Odroid-U3.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: <stable@vger.kernel.org>      # for v4.12 and up
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: qcom: camss: Make function vfe_set_selection static 2017-09-23T11:23:49+00:00 Colin Ian King colin.king@canonical.com 2017-08-29T10:21:10+00:00 9b62ccdbc797ae42342bd6ca15719362d2543d24 The function vfe_set_selection is local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: warning: symbol 'vfe_set_selection' was not declared. Should it be static? Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Todor Tomov <todor.tomov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 
The function vfe_set_selection is local to the source and does
not need to be in global scope, so make it static.

Cleans up sparse warning:
warning: symbol 'vfe_set_selection' was not declared. Should it be static?

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Todor Tomov <todor.tomov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
media: venus: init registered list on streamoff 2017-09-23T11:23:20+00:00 Stanimir Varbanov stanimir.varbanov@linaro.org 2017-08-29T08:19:43+00:00 bbd770aee018c8f46d8f43263928440d5ac04b36 Add missing init_list_head for the registered buffer list. Absence of the init could lead to a unhandled kernel paging request as below, when streamon/streamoff are called in row. [338046.571321] Unable to handle kernel paging request at virtual address fffffffffffffe00 [338046.574849] pgd = ffff800034820000 [338046.582381] [fffffffffffffe00] *pgd=00000000b60f5003[338046.582545] , *pud=00000000b1f31003 , *pmd=0000000000000000[338046.592082] [338046.597754] Internal error: Oops: 96000004 [#1] PREEMPT SMP [338046.601671] Modules linked in: venus_enc venus_dec venus_core usb_f_ecm g_ether usb_f_rndis u_ether libcomposite ipt_MASQUERADE nf_nat_masquerade_ipv4 arc4 wcn36xx mac80211 btqcomsmd btqca iptable_nat nf_co] [338046.662408] CPU: 0 PID: 5433 Comm: irq/160-venus Tainted: G W 4.9.39+ #232 [338046.668024] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC (DT) [338046.675268] task: ffff80003541cb00 task.stack: ffff800026e20000 [338046.682097] PC is at venus_helper_release_buf_ref+0x28/0x88 [venus_core] [338046.688282] LR is at vdec_event_notify+0xe8/0x150 [venus_dec] [338046.695029] pc : [<ffff000000af6c48>] lr : [<ffff000000a6fc60>] pstate: a0000145 [338046.701256] sp : ffff800026e23bc0 [338046.708494] x29: ffff800026e23bc0 x28: 0000000000000000 [338046.718853] x27: ffff000000afd4f8 x26: ffff800031faa700 [338046.729253] x25: ffff000000afd790 x24: ffff800031faa618 [338046.739664] x23: ffff800003e18138 x22: ffff800002fc9810 [338046.750109] x21: ffff800026e23c28 x20: 0000000000000001 [338046.760592] x19: ffff80002a13b800 x18: 0000000000000010 [338046.771099] x17: 0000ffffa3d01600 x16: ffff000008100428 [338046.781654] x15: 0000000000000006 x14: ffff000089045ba7 [338046.792250] x13: ffff000009045bb6 x12: 00000000004f37c8 [338046.802894] x11: 0000000000267211 x10: 0000000000000000 [338046.813574] x9 : 0000000000032000 x8 : 00000000dc400000 [338046.824274] x7 : 0000000000000000 x6 : ffff800031faa728 [338046.835005] x5 : ffff80002a13b850 x4 : 0000000000000000 [338046.845793] x3 : fffffffffffffdf8 x2 : 0000000000000000 [338046.856602] x1 : 0000000000000003 x0 : ffff80002a13b800 Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 
Add missing init_list_head for the registered buffer list.
Absence of the init could lead to a unhandled kernel paging
request as below, when streamon/streamoff are called in row.

[338046.571321] Unable to handle kernel paging request at virtual address fffffffffffffe00
[338046.574849] pgd = ffff800034820000
[338046.582381] [fffffffffffffe00] *pgd=00000000b60f5003[338046.582545]
, *pud=00000000b1f31003
, *pmd=0000000000000000[338046.592082]
[338046.597754] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[338046.601671] Modules linked in: venus_enc venus_dec venus_core
usb_f_ecm g_ether usb_f_rndis u_ether libcomposite ipt_MASQUERADE
nf_nat_masquerade_ipv4 arc4 wcn36xx mac80211 btqcomsmd btqca iptable_nat
nf_co]
[338046.662408] CPU: 0 PID: 5433 Comm: irq/160-venus Tainted: G        W
4.9.39+ #232
[338046.668024] Hardware name: Qualcomm Technologies, Inc. APQ 8016 SBC
(DT)
[338046.675268] task: ffff80003541cb00 task.stack: ffff800026e20000
[338046.682097] PC is at venus_helper_release_buf_ref+0x28/0x88
[venus_core]
[338046.688282] LR is at vdec_event_notify+0xe8/0x150 [venus_dec]
[338046.695029] pc : [<ffff000000af6c48>] lr : [<ffff000000a6fc60>]
pstate: a0000145
[338046.701256] sp : ffff800026e23bc0
[338046.708494] x29: ffff800026e23bc0 x28: 0000000000000000
[338046.718853] x27: ffff000000afd4f8 x26: ffff800031faa700
[338046.729253] x25: ffff000000afd790 x24: ffff800031faa618
[338046.739664] x23: ffff800003e18138 x22: ffff800002fc9810
[338046.750109] x21: ffff800026e23c28 x20: 0000000000000001
[338046.760592] x19: ffff80002a13b800 x18: 0000000000000010
[338046.771099] x17: 0000ffffa3d01600 x16: ffff000008100428
[338046.781654] x15: 0000000000000006 x14: ffff000089045ba7
[338046.792250] x13: ffff000009045bb6 x12: 00000000004f37c8
[338046.802894] x11: 0000000000267211 x10: 0000000000000000
[338046.813574] x9 : 0000000000032000 x8 : 00000000dc400000
[338046.824274] x7 : 0000000000000000 x6 : ffff800031faa728
[338046.835005] x5 : ffff80002a13b850 x4 : 0000000000000000
[338046.845793] x3 : fffffffffffffdf8 x2 : 0000000000000000
[338046.856602] x1 : 0000000000000003 x0 : ffff80002a13b800

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Merge tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping 2017-09-12T20:30:06+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-09-12T20:30:06+00:00 52269718dc2cf2585d7a2828f31d46ef46e68000 Pull dma-mapping updates from Christoph Hellwig: - removal of the old dma_alloc_noncoherent interface - remove unused flags to dma_declare_coherent_memory - restrict OF DMA configuration to specific physical busses - use the iommu mailing list for dma-mapping questions and patches * tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping: dma-coherent: fix dma_declare_coherent_memory() logic error ARM: imx: mx31moboard: Remove unused 'dma' variable dma-coherent: remove an unused variable MAINTAINERS: use the iommu list for the dma-mapping subsystem dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags dma-coherent: remove the DMA_MEMORY_INCLUDES_CHILDREN flag of: restrict DMA configuration dma-mapping: remove dma_alloc_noncoherent and dma_free_noncoherent i825xx: switch to switch to dma_alloc_attrs au1000_eth: switch to dma_alloc_attrs sgiseeq: switch to dma_alloc_attrs dma-mapping: reduce dma_mapping_error inline bloat 
Pull dma-mapping updates from Christoph Hellwig:

 - removal of the old dma_alloc_noncoherent interface

 - remove unused flags to dma_declare_coherent_memory

 - restrict OF DMA configuration to specific physical busses

 - use the iommu mailing list for dma-mapping questions and patches

* tag 'dma-mapping-4.14' of git://git.infradead.org/users/hch/dma-mapping:
  dma-coherent: fix dma_declare_coherent_memory() logic error
  ARM: imx: mx31moboard: Remove unused 'dma' variable
  dma-coherent: remove an unused variable
  MAINTAINERS: use the iommu list for the dma-mapping subsystem
  dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags
  dma-coherent: remove the DMA_MEMORY_INCLUDES_CHILDREN flag
  of: restrict DMA configuration
  dma-mapping: remove dma_alloc_noncoherent and dma_free_noncoherent
  i825xx: switch to switch to dma_alloc_attrs
  au1000_eth: switch to dma_alloc_attrs
  sgiseeq: switch to dma_alloc_attrs
  dma-mapping: reduce dma_mapping_error inline bloat
Merge tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media 2017-09-07T19:53:14+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-09-07T19:53:14+00:00 c0da4fa0d1a54495d6055c009ac46b76d1da2c86 Pull media updates from Mauro Carvalho Chehab: "Brazil's Independence Day pull request :-) This is one of the biggest media pull requests, with 625 patches affecting almost all parts of media (RC, DVB, V4L2, CEC, docs). This contains: - A lot of new drivers: * DVB frontends: mxl5xx, stv0910, stv6111; * camera flash: as3645a led driver; * HDMI receiver: adv748X; * camera sensor: Omnivision 6650 5M driver (ov6650); * HDMI CEC: ao-cec meson driver; * V4L2: Qualcom camss driver; * Remote controller: gpio-ir-tx, pwm-ir-tx and zx-irdec drivers. - The DDbridge DVB driver got a massive update, with makes it in sync with modern hardware from that vendor; - There's an important milestone on this series: the DVB documentation was written in 2003, but only started to be updated in 2007. It also used to contain several gaps from the time it was kept out of tree, mentioning error codes and device nodes that never existed upstream. On this series, it received a massive update: all non-deprecated digital TV APIs are now in sync with the current implementation; - Some DVB APIs that aren't used by any upstream driver got removed; - Other parts of the media documentation algo got updated, fixing some bugs on its PDF output and making it compatible with Sphinx version 1.6. As the number of hacks required to build PDF output reduced, I hope we'll have less troubles as newer versions of our documentation toolchain are released (famous last words); - As usual, lots of driver cleanups and improvements" * tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (624 commits) media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependency media: get rid of removed DMX_GET_CAPS and DMX_SET_SOURCE leftovers media: Revert "[media] v4l: async: make v4l2 coexist with devicetree nodes in a dt overlay" media: staging: atomisp: sh_css_calloc shall return a pointer to the allocated space media: Revert "[media] lirc_dev: remove superfluous get/put_device() calls" media: add qcom_camss.rst to v4l-drivers rst file media: dvb headers: make checkpatch happier media: dvb uapi: move frontend legacy API to another part of the book media: pixfmt-srggb12p.rst: better format the table for PDF output media: docs-rst: media: Don't use \small for V4L2_PIX_FMT_SRGGB10 documentation media: index.rst: don't write "Contents:" on PDF output media: pixfmt*.rst: replace a two dots by a comma media: vidioc-g-fmt.rst: adjust table format media: vivid.rst: add a blank line to correct ReST format media: v4l2 uapi book: get rid of driver programming's chapter media: format.rst: use the right markup for important notes media: docs-rst: cardlists: change their format to flat-tables media: em28xx-cardlist.rst: update to reflect last changes media: v4l2-event.rst: adjust table to fit on PDF output media: docs: don't show ToC for each part on PDF output ... 
Pull media updates from Mauro Carvalho Chehab:
 "Brazil's Independence Day pull request :-)

  This is one of the biggest media pull requests, with 625 patches
  affecting almost all parts of media (RC, DVB, V4L2, CEC, docs).

  This contains:

   - A lot of new drivers:
     * DVB frontends: mxl5xx, stv0910, stv6111;
     * camera flash: as3645a led driver;
     * HDMI receiver: adv748X;
     * camera sensor: Omnivision 6650 5M driver (ov6650);
     * HDMI CEC: ao-cec meson driver;
     * V4L2: Qualcom camss driver;
     * Remote controller: gpio-ir-tx, pwm-ir-tx and zx-irdec drivers.

   - The DDbridge DVB driver got a massive update, with makes it in sync
     with modern hardware from that vendor;

   - There's an important milestone on this series: the DVB
     documentation was written in 2003, but only started to be updated
     in 2007. It also used to contain several gaps from the time it was
     kept out of tree, mentioning error codes and device nodes that
     never existed upstream. On this series, it received a massive
     update: all non-deprecated digital TV APIs are now in sync with the
     current implementation;

   - Some DVB APIs that aren't used by any upstream driver got removed;

   - Other parts of the media documentation algo got updated, fixing
     some bugs on its PDF output and making it compatible with Sphinx
     version 1.6.

     As the number of hacks required to build PDF output reduced, I hope
     we'll have less troubles as newer versions of our documentation
     toolchain are released (famous last words);

   - As usual, lots of driver cleanups and improvements"

* tag 'media/v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (624 commits)
  media: leds: as3645a: add V4L2_FLASH_LED_CLASS dependency
  media: get rid of removed DMX_GET_CAPS and DMX_SET_SOURCE leftovers
  media: Revert "[media] v4l: async: make v4l2 coexist with devicetree nodes in a dt overlay"
  media: staging: atomisp: sh_css_calloc shall return a pointer to the allocated space
  media: Revert "[media] lirc_dev: remove superfluous get/put_device() calls"
  media: add qcom_camss.rst to v4l-drivers rst file
  media: dvb headers: make checkpatch happier
  media: dvb uapi: move frontend legacy API to another part of the book
  media: pixfmt-srggb12p.rst: better format the table for PDF output
  media: docs-rst: media: Don't use \small for V4L2_PIX_FMT_SRGGB10 documentation
  media: index.rst: don't write "Contents:" on PDF output
  media: pixfmt*.rst: replace a two dots by a comma
  media: vidioc-g-fmt.rst: adjust table format
  media: vivid.rst: add a blank line to correct ReST format
  media: v4l2 uapi book: get rid of driver programming's chapter
  media: format.rst: use the right markup for important notes
  media: docs-rst: cardlists: change their format to flat-tables
  media: em28xx-cardlist.rst: update to reflect last changes
  media: v4l2-event.rst: adjust table to fit on PDF output
  media: docs: don't show ToC for each part on PDF output
  ...
dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flags 2017-09-01T09:59:17+00:00 Christoph Hellwig hch@lst.de 2017-08-25T15:13:09+00:00 2436bdcda53ff4abb7897c87fa29ef3de8055344 DMA_MEMORY_IO was never used in the tree, so remove it. That means there is no need for the DMA_MEMORY_MAP flag either now, so remove it as well and change dma_declare_coherent_memory to return a normal errno value. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> 
DMA_MEMORY_IO was never used in the tree, so remove it.  That means there is
no need for the DMA_MEMORY_MAP flag either now, so remove it as well and
change dma_declare_coherent_memory to return a normal errno value.

Signed-off-by: Christoph Hellwig <hch@lst.de>
 Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
media: platform: make video_device const 2017-08-27T12:44:30+00:00 Bhumika Goyal bhumirks@gmail.com 2017-08-26T12:57:26+00:00 5303135c178c2f51044ddbc30037af9f030e6017 Make these const as they are only used during a copy operation. Done using Coccinelle: @match disable optional_qualifier@ identifier s; @@ static struct video_device s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; expression list[3] es; position ref.p; @@ cx88_vdev_init(es,&s@p,...) @good2@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1 && !good2@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct video_device s; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> 
Make these const as they are only used during a copy operation.
Done using Coccinelle:

@match disable optional_qualifier@
identifier s;
@@
static struct video_device s = {...};

@ref@
position p;
identifier match.s;
@@
s@p

@good1@
identifier match.s;
expression list[3] es;
position ref.p;
@@
cx88_vdev_init(es,&s@p,...)

@good2@
position ref.p;
identifier match.s,f,c;
expression e;
@@
(
e = s@p
|
e = s@p.f
|
c(...,s@p.f,...)
|
c(...,s@p,...)
)

@bad depends on  !good1 && !good2@
position ref.p;
identifier match.s;
@@
s@p

@depends on forall !bad disable optional_qualifier@
identifier match.s;
@@
static
+ const
struct video_device s;

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>