This reverts commit d39083234c60519724c6ed59509a2129fd2aed41.

Because of recent interactions with developers from @umn.edu, all
commits from them have been recently re-reviewed to ensure if they were
correct or not.

Upon review, it was determined that this commit is not needed at all as
the media core already prevents memory disclosure on this codepath, so
just drop the extra memset happening here.

Cc: Kangjie Lu <kjlu@umn.edu>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes: d39083234c60 ("media: rcar_drif: fix a memory disclosure")
Cc: stable <stable@vger.kernel.org>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20210503115736.2104747-4-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull media updates from Mauro Carvalho Chehab:

 - addition of a maintainer's profile for the media subsystem

 - addition of i.MX8 IP support

 - qcom/camss gained support for hardware version Titan 170

 - new RC keymaps

 - Lots of other improvements, cleanups and bug fixes

* tag 'media/v5.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (488 commits)
  media: coda: fix macroblocks count control usage
  media: rkisp1: params: fix wrong bits settings
  media: cedrus: Fix H265 status definitions
  media: meson-ge2d: fix rotation parameters
  media: v4l2-ctrls: fix reference to freed memory
  media: venus : hfi: add venus image info into smem
  media: venus: Fix internal buffer size calculations for v6.
  media: venus: helpers: keep max bandwidth when mbps exceeds the supported range
  media: venus: fix hw overload error log condition
  media: venus: core: correct firmware name for sm8250
  media: venus: core,pm: fix potential infinite loop
  media: venus: core: Fix kerneldoc warnings
  media: gscpa/stv06xx: fix memory leak
  media: cx25821: remove unused including <linux/version.h>
  media: staging: media/meson: remove redundant dev_err call
  media: adv7842: support 1 block EDIDs, fix clearing EDID
  media: adv7842: configure all pads
  media: allegro: change kernel-doc comment blocks to normal comments
  media: camss: ispif: Remove redundant dev_err call in msm_ispif_subdev_init()
  media: i2c: rdamc21: Fix warning on u8 cast
  ...

Commit b2d3bef1aa78 ("media: coda: Add a V4L2 user for control error
macroblocks count") add the control for the decoder devices. But
during streamon() this ioctl gets called for all (encoder and decoder)
devices and on encoder devices this causes a null pointer exception.

Fix this by setting the control only if it is really accessible.

Fixes: b2d3bef1aa78 ("media: coda: Add a V4L2 user for control error macroblocks count")
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Cc: <stable@vger.kernel.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

The histogram mode is set using 'rkisp1_params_set_bits'.
Only the bits of the mode should be the value argument for
that function. Otherwise bits outside the mode mask are
turned on which is not what was intended.

Fixes: bae1155cf579 ("media: staging: rkisp1: add output device for parameters")
Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

With these settings, 90deg and 270deg rotation leads to inverted
vertical, fix them to have correct rotation.

Fixes: 59a635327ca7 ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Fill fw version info into smem to be printed as part of
soc info.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

- Update persist buffer size for encoder to 204800.
- Update persist buffer size calculation for h264 decoder.
- h264d level 6 support needs update in internal buffer size.
  update below buffers size
  - h264 decoder colocated motion vector buffer.
  - h264 decoder VPP command buffer.
  - h265 decoder VPP command buffer.
- Update VP9_NUM_FRAME_INFO_BUF to 32.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

When the video usecase have macro blocks per sec which is  more than
supported, keep the required bus bandwidth as the maximum supported.

Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

In current video driver, frequency is calculated for all the
running video instances and check aganist maximum supported frequency.
If both calculated frequency and maximum supported frequency are same,
even then HW overload error is printed.
Fix this by printing error log only when frequency is greater than
maximum supported frequency.

Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

Firmware name for venus should be qcom/vpu-1.0/venus.mdt, not
qcom/sm8250/venus.mdt.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>