This was done entirely with mindless brute force, using

    git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
        xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'

to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.

Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.

For the same reason the 'flex' versions will be done as a separate
conversion.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:

Single allocations:	kmalloc(sizeof(TYPE), ...)
are replaced with:	kmalloc_obj(TYPE, ...)

Array allocations:	kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with:	kmalloc_objs(TYPE, COUNT, ...)

Flex array allocations:	kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with:	kmalloc_flex(*PTR, FAM, COUNT, ...)

(where TYPE may also be *VAR)

The resulting allocations no longer return "void *", instead returning
"TYPE *".

Signed-off-by: Kees Cook <kees@kernel.org>

The driver calls reset_control_get_optional_exclusive() but never calls
reset_control_put() in error paths or in the remove function. This causes
a resource leak when probe fails after successfully acquiring the reset
control, or when the driver is unloaded.

Switch to devm_reset_control_get_optional_exclusive() to automatically
manage the reset control resource.

Fixes: a4b80242d046 ("media: st-rc: explicitly request exclusive reset control")
Cc: stable@vger.kernel.org
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

The driver has never supported anything but OF probing so drop the
unused platform module alias.

Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

Pull media updates from Mauro Carvalho Chehab:

 - Added a new V4L2 clock helper

 - New camera sensor drivers

 - iris: Enable H.264/H.265 encoder support and fixes in iris driver
   common code

 - camss: add support for new SoC flavors

 - venus: add new SoC support

 - tc358743: support more infoframe types

 - Various fixes, driver improvements and cleanups

* tag 'media/v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (439 commits)
  media: venus: pm_helpers: add fallback for the opp-table
  media: qcom: camss: vfe: Fix BPL alignment for QCM2290
  media: tuner: xc5000: Fix use-after-free in xc5000_release
  media: i2c: tc358743: Fix use-after-free bugs caused by orphan timer in probe
  media: b2c2: Fix use-after-free causing by irq_check_work in flexcop_pci_remove
  media: vsp1: Export missing vsp1_isp_free_buffer symbol
  media: renesas: vsp1: Convert to SYSTEM_SLEEP/RUNTIME_PM_OPS()
  media: renesas: ceu: Convert to RUNTIME_PM_OPS()
  media: renesas: fdp1: Convert to RUNTIME_PM_OPS()
  media: renesas: rcar-vin: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
  media: renesas: rcar_drif: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
  media: uvcvideo: Mark invalid entities with id UVC_INVALID_ENTITY_ID
  media: uvcvideo: Support UVC_CROSXU_CONTROL_IQ_PROFILE
  media: uvcvideo: Run uvc_ctrl_init_ctrl for all controls
  media: uvcvideo: Shorten the transfer size non compliance message
  media: uvcvideo: Do not re-reference dev->udev
  media: uvcvideo: Use intf instead of udev for printks
  media: uvcvideo: Move video_device under video_queue
  media: uvcvideo: Drop stream->mutex
  media: uvcvideo: Move MSXU_CONTROL_METADATA definition to header
  ...

Change "ret" from u8 to int type in redrat3_enable_detector() to store
negative error codes or zero returned by redrat3_send_cmd() and
usb_submit_urb() - this better aligns with the coding standards and
maintains code consistency.

No effect on runtime.

Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

Syzbot reports a KASAN issue as below:
BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline]
BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465

CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
 <TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
__create_pipe include/linux/usb.h:1945 [inline]
send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991
vfs_write+0x2d7/0xdd0 fs/read_write.c:576
ksys_write+0x127/0x250 fs/read_write.c:631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd

The iMON driver improperly releases the usb_device reference in
imon_disconnect without coordinating with active users of the
device.

Specifically, the fields usbdev_intf0 and usbdev_intf1 are not
protected by the users counter (ictx->users). During probe,
imon_init_intf0 or imon_init_intf1 increments the usb_device
reference count depending on the interface. However, during
disconnect, usb_put_dev is called unconditionally, regardless of
actual usage.

As a result, if vfd_write or other operations are still in
progress after disconnect, this can lead to a use-after-free of
the usb_device pointer.

Thread 1 vfd_write                      Thread 2 imon_disconnect
                                        ...
                                        if
                                          usb_put_dev(ictx->usbdev_intf0)
                                        else
                                          usb_put_dev(ictx->usbdev_intf1)
...
while
  send_packet
    if
      pipe = usb_sndintpipe(
        ictx->usbdev_intf0) UAF
    else
      pipe = usb_sndctrlpipe(
        ictx->usbdev_intf0, 0) UAF

Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by
checking ictx->disconnected in all writer paths. Add early return
with -ENODEV in send_packet(), vfd_write(), lcd_write() and
display_open() if the device is no longer present.

Set and read ictx->disconnected under ictx->lock to ensure memory
synchronization. Acquire the lock in imon_disconnect() before setting
the flag to synchronize with any ongoing operations.

Ensure writers exit early and safely after disconnect before the USB
core proceeds with cleanup.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Reported-by: syzbot+f1a69784f6efe748c3bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f1a69784f6efe748c3bf
Fixes: 21677cfc562a ("V4L/DVB: ir-core: add imon driver")
Cc: stable@vger.kernel.org

Signed-off-by: Larshin Sergey <Sergey.Larshin@kaspersky.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

The field timer->base->get_time is a private implementation detail and
should not be accessed outside of the hrtimer core.

Switch to an equivalent higher-level helper.

Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Sean Young <sean@mess.org>
Link: https://lore.kernel.org/all/20250821-hrtimer-cleanup-get_time-v2-6-3ae822e5bfbd@linutronix.de

pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Thierry Reding <treding@nvidia.com> (tegra-vde/h264.c)
Acked-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com> (alvium-csi2.c)
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com> (iris_hfi_queue.c)
Reviewed-by: Sean Young <sean@mess.org>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com> (imx219.c)
Acked-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>

These defines were used for devices now supported by the imon_raw
driver.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>