linux-toradex.git/drivers/media/rc, branch v3.2.39

rc: ite-cir: Initialise ite_dev::rdev earlier

2012-10-17T02:48:29+00:00

commit 4b961180ef275035b1538317ffd0e21e80e63e77 upstream.

ite_dev::rdev is currently initialised in ite_probe() after
rc_register_device() returns.  If a newly registered device is opened
quickly enough, we may enable interrupts and try to use ite_dev::rdev
before it has been initialised.  Move it up to the earliest point we
can, right after calling rc_allocate_device().

Reported-and-tested-by: YunQiang Su 

Signed-off-by: Ben Hutchings 
Signed-off-by: Mauro Carvalho Chehab

ene_ir: Fix driver initialisation

2012-08-09T23:24:38+00:00

commit b31b021988fed9e3741a46918f14ba9b063811db upstream.

commit 9ef449c6b31bb6a8e6dedc24de475a3b8c79be20 ("[media] rc: Postpone ISR
registration") fixed an early ISR registration on several drivers.  It did
however also introduced a bug by moving the invocation of pnp_port_start()
to the end of the probe function.

This patch fixes this issue by moving the invocation of pnp_port_start() to
an earlier stage in the probe function.

Cc: Jarod Wilson 
Signed-off-by: Luis Henriques 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Ben Hutchings

rc: Postpone ISR registration

2012-05-20T21:56:40+00:00

commit 9ef449c6b31bb6a8e6dedc24de475a3b8c79be20 upstream.

An early registration of an ISR was causing a crash to several users (for
example, with the ite-cir driver: http://bugs.launchpad.net/bugs/972723).
The reason was that IRQs were being triggered before a driver
initialisation was completed.

This patch fixes this by moving the invocation to request_irq() and to
request_region() to a later stage on the driver probe function.

Signed-off-by: Luis Henriques 
Acked-by: Jarod Wilson 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Ben Hutchings

rc-core: set mode for winbond-cir

2012-05-11T12:13:57+00:00

commit d9b786955f80fb306471fdb9ea24c6d03af6ca36 upstream.

Setting the correct mode is required by rc-core or scancodes won't be
generated (which isn't very user-friendly).

This one-line fix should be suitable for 3.4-rc2.

Signed-off-by: David Härdeman 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Ben Hutchings

imon: don't wedge hardware after early callbacks

2012-03-01T00:31:22+00:00

commit 8791d63af0cf113725ae4cb8cba9492814c59a93 upstream.

This patch is just a minor update to one titled "imon: Input from ffdc
device type ignored" from Corinna Vinschen. An earlier patch to prevent
an oops when we got early callbacks also has the nasty side-effect of
wedging imon hardware, as we don't acknowledge the urb. Rework the check
slightly here to bypass processing the packet, as the driver isn't yet
fully initialized, but still acknowlege the urb and submit a new rx_urb.
Do this for both interfaces -- irrelevant for ffdc hardware, but
relevant for newer hardware, though newer hardware doesn't spew the
constant stream of data as soon as the hardware is initialized like the
older ffdc devices, so they'd be less likely to trigger this anyway...

Tested with both an ffdc device and an 0042 device.

Reported-by: Corinna Vinschen 
Signed-off-by: Jarod Wilson 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2011-12-20T18:49:39+00:00

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (31 commits)
  Revert "[media] af9015: limit I2C access to keep FW happy"
  [media] s5p-fimc: Fix camera input configuration in subdev operations
  [media] m5mols: Fix logic in sanity check
  [media] ati_remote: switch to single-byte scancodes
  [media] V4L: mt9m111: fix uninitialised mutex
  [media] V4L: omap1_camera: fix missing  include
  [media] V4L: mt9t112: use after free in mt9t112_probe()
  [media] V4L: soc-camera: fix compiler warnings on 64-bit platforms
  [media] s5p_mfc_enc: fix s/H264/H263/ typo
  [media] omap_vout: Fix compile error in 3.1
  [media] au0828: add missing models 72101, 72201 & 72261 to the model matrix
  [media] au0828: add missing USB ID 2040:7213
  [media] au0828: add missing USB ID 2040:7260
  [media] [trivial] omap24xxcam-dma: Fix logical test
  [media] omap_vout: fix crash if no driver for a display
  [media] media: video: s5p-tv: fix build break
  [media] omap3isp: fix compilation of ispvideo.c
  [media] m5mols: Fix set_fmt to return proper pixel format code
  [media] s5p-fimc: Use correct fourcc for RGB565 colour format
  [media] s5p-fimc: Fail driver probing when sensor configuration is wrong
  ...

[media] ati_remote: switch to single-byte scancodes

2011-12-11T12:51:59+00:00

The ati_remote driver currently uses 2-byte scancodes. However, one of
those bytes is actually a checksum and therefore shouldn't be considered
as part of the scancode.

Fix the driver to only use the actual data byte as a scancode and to
check the checksum itself. Update the bundled keymaps accordingly.

Since ati_remote was only migrated to the rc subsystem for 3.2, the
previous scancodes weren't emitted on any stable kernel.

Reported-by: George Spelvin 
Signed-off-by: Anssi Hannula 
Signed-off-by: Mauro Carvalho Chehab

Merge branch 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux

2011-11-07T03:44:47+00:00

* 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits)
  Revert "tracing: Include module.h in define_trace.h"
  irq: don't put module.h into irq.h for tracking irqgen modules.
  bluetooth: macroize two small inlines to avoid module.h
  ip_vs.h: fix implicit use of module_get/module_put from module.h
  nf_conntrack.h: fix up fallout from implicit moduleparam.h presence
  include: replace linux/module.h with "struct module" wherever possible
  include: convert various register fcns to macros to avoid include chaining
  crypto.h: remove unused crypto_tfm_alg_modname() inline
  uwb.h: fix implicit use of asm/page.h for PAGE_SIZE
  pm_runtime.h: explicitly requires notifier.h
  linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h
  miscdevice.h: fix up implicit use of lists and types
  stop_machine.h: fix implicit use of smp.h for smp_processor_id
  of: fix implicit use of errno.h in include/linux/of.h
  of_platform.h: delete needless include 
  acpi: remove module.h include from platform/aclinux.h
  miscdevice.h: delete unnecessary inclusion of module.h
  device_cgroup.h: delete needless include 
  net: sch_generic remove redundant use of 
  net: inet_timewait_sock doesnt need 
  ...

Fix up trivial conflicts (other header files, and  removal of the ab3550 mfd driver) in
 - drivers/media/dvb/frontends/dibx000_common.c
 - drivers/media/video/{mt9m111.c,ov6650.c}
 - drivers/mfd/ab3550-core.c
 - include/linux/dmaengine.h

drivers/media: Add module.h to all files using it implicitly

2011-10-31T23:31:51+00:00

A pending cleanup will mean that module.h won't be implicitly
everywhere anymore.  Make sure the modular drivers in clocksource
are actually calling out for  explicitly in advance.

Signed-off-by: Paul Gortmaker

drivers/media: Add export.h for EXPORT_SYMBOL/THIS_MODULE as required

2011-10-31T23:31:51+00:00

These two macros were in module.h but now module.h is no longer
sprayed across every source file imaginable, so the users need
to expicitly call out their use of them.

Signed-off-by: Paul Gortmaker