linux-toradex.git/drivers/media/rc, branch v6.4 Linux kernel for Apalis and Colibri modules Merge tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core 2023-04-27T18:53:57+00:00 Linus Torvalds torvalds@linux-foundation.org 2023-04-27T18:53:57+00:00 556eb8b79190151506187bf0b16dda423c34d9a8 Pull driver core updates from Greg KH: "Here is the large set of driver core changes for 6.4-rc1. Once again, a busy development cycle, with lots of changes happening in the driver core in the quest to be able to move "struct bus" and "struct class" into read-only memory, a task now complete with these changes. This will make the future rust interactions with the driver core more "provably correct" as well as providing more obvious lifetime rules for all busses and classes in the kernel. The changes required for this did touch many individual classes and busses as many callbacks were changed to take const * parameters instead. All of these changes have been submitted to the various subsystem maintainers, giving them plenty of time to review, and most of them actually did so. Other than those changes, included in here are a small set of other things: - kobject logging improvements - cacheinfo improvements and updates - obligatory fw_devlink updates and fixes - documentation updates - device property cleanups and const * changes - firwmare loader dependency fixes. All of these have been in linux-next for a while with no reported problems" * tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits) device property: make device_property functions take const device * driver core: update comments in device_rename() driver core: Don't require dynamic_debug for initcall_debug probe timing firmware_loader: rework crypto dependencies firmware_loader: Strip off \n from customized path zram: fix up permission for the hot_add sysfs file cacheinfo: Add use_arch[|_cache]_info field/function arch_topology: Remove early cacheinfo error message if -ENOENT cacheinfo: Check cache properties are present in DT cacheinfo: Check sib_leaf in cache_leaves_are_shared() cacheinfo: Allow early level detection when DT/ACPI info is missing/broken cacheinfo: Add arm64 early level initializer implementation cacheinfo: Add arch specific early level initializer tty: make tty_class a static const structure driver core: class: remove struct class_interface * from callbacks driver core: class: mark the struct class in struct class_interface constant driver core: class: make class_register() take a const * driver core: class: mark class_release() as taking a const * driver core: remove incorrect comment for device_create* MIPS: vpe-cmp: remove module owner pointer from struct class usage. ... 
Pull driver core updates from Greg KH:
 "Here is the large set of driver core changes for 6.4-rc1.

  Once again, a busy development cycle, with lots of changes happening
  in the driver core in the quest to be able to move "struct bus" and
  "struct class" into read-only memory, a task now complete with these
  changes.

  This will make the future rust interactions with the driver core more
  "provably correct" as well as providing more obvious lifetime rules
  for all busses and classes in the kernel.

  The changes required for this did touch many individual classes and
  busses as many callbacks were changed to take const * parameters
  instead. All of these changes have been submitted to the various
  subsystem maintainers, giving them plenty of time to review, and most
  of them actually did so.

  Other than those changes, included in here are a small set of other
  things:

   - kobject logging improvements

   - cacheinfo improvements and updates

   - obligatory fw_devlink updates and fixes

   - documentation updates

   - device property cleanups and const * changes

   - firwmare loader dependency fixes.

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'driver-core-6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (120 commits)
  device property: make device_property functions take const device *
  driver core: update comments in device_rename()
  driver core: Don't require dynamic_debug for initcall_debug probe timing
  firmware_loader: rework crypto dependencies
  firmware_loader: Strip off \n from customized path
  zram: fix up permission for the hot_add sysfs file
  cacheinfo: Add use_arch[|_cache]_info field/function
  arch_topology: Remove early cacheinfo error message if -ENOENT
  cacheinfo: Check cache properties are present in DT
  cacheinfo: Check sib_leaf in cache_leaves_are_shared()
  cacheinfo: Allow early level detection when DT/ACPI info is missing/broken
  cacheinfo: Add arm64 early level initializer implementation
  cacheinfo: Add arch specific early level initializer
  tty: make tty_class a static const structure
  driver core: class: remove struct class_interface * from callbacks
  driver core: class: mark the struct class in struct class_interface constant
  driver core: class: make class_register() take a const *
  driver core: class: mark class_release() as taking a const *
  driver core: remove incorrect comment for device_create*
  MIPS: vpe-cmp: remove module owner pointer from struct class usage.
  ...
media: rc: gpio-ir-recv: Fix support for wake-up 2023-04-12T07:19:05+00:00 Florian Fainelli f.fainelli@gmail.com 2023-03-24T20:38:33+00:00 9c592f8ab114875fdb3b2040f01818e53de44991 The driver was intended from the start to be a wake-up source for the system, however due to the absence of a suitable call to device_set_wakeup_capable(), the device_may_wakeup() call used to decide whether to enable the GPIO interrupt as a wake-up source would never happen. Lookup the DT standard "wakeup-source" property and call device_init_wakeup() to ensure the device is flagged as being wakeup capable. Reported-by: Matthew Lear <matthew.lear@broadcom.com> Fixes: fd0f6851eb46 ("[media] rc: Add support for GPIO based IR Receiver driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> 
The driver was intended from the start to be a wake-up source for the
system, however due to the absence of a suitable call to
device_set_wakeup_capable(), the device_may_wakeup() call used to decide
whether to enable the GPIO interrupt as a wake-up source would never
happen. Lookup the DT standard "wakeup-source" property and call
device_init_wakeup() to ensure the device is flagged as being wakeup
capable.

Reported-by: Matthew Lear <matthew.lear@broadcom.com>
Fixes: fd0f6851eb46 ("[media] rc: Add support for GPIO based IR Receiver driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: sunxi-cir: Convert to platform remove callback returning void 2023-04-11T14:59:21+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2023-03-26T14:32:17+00:00 04b5c28bb4387c7f01d8df19fcd90d57994e6a27 The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> 
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: st_rc: Convert to platform remove callback returning void 2023-04-11T14:59:21+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2023-03-26T14:32:16+00:00 41d64f00d3409194928ccb6a920a090907244037 The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> 
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: mtk-cir: Convert to platform remove callback returning void 2023-04-11T14:59:21+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2023-03-26T14:32:15+00:00 d6db10b14b43cf3614e01f5884cc09ffe3e4e9a3 The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> 
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: meson-ir: Convert to platform remove callback returning void 2023-04-11T14:59:20+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2023-03-26T14:32:14+00:00 e6c0447418d01793c8d92e4edddebcc718dda470 The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> 
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: meson-ir-tx: Convert to platform remove callback returning void 2023-04-11T14:59:20+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2023-03-26T14:32:13+00:00 bd8bf77ff80f5457ea9772590d7eba2b93d522dd The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> 
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: ir-hix5hd2: Convert to platform remove callback returning void 2023-04-11T14:59:20+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2023-03-26T14:32:12+00:00 ea4e628f21aaa9bfbf1ba82e3f865be89e36825f The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> 
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: img-ir-core: Convert to platform remove callback returning void 2023-04-11T14:59:20+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2023-03-26T14:32:11+00:00 f6fc05fa3e289bb84ff4073b5c3ea7917649f927 The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> 
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
media: gpio-ir-recv: Convert to platform remove callback returning void 2023-04-11T14:59:20+00:00 Uwe Kleine-König u.kleine-koenig@pengutronix.de 2023-03-26T14:32:10+00:00 66774df1545d909c22436fad58a1d4c4d49fe6d2 The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> 
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is (mostly) ignored
and this typically results in resource leaks. To improve here there is a
quest to make the remove callback return void. In the first step of this
quest all drivers are converted to .remove_new() which already returns
void.

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>