linux-toradex.git/drivers/media/usb/dvb-usb, branch v3.11.2

[media] stb0899: remove commented value from IQ_SWAP_ON/OFF usages

2013-05-21T11:54:37+00:00

As the enum values have changed recently, the comments are void.

Signed-off-by: Reinhard Nißl 
Signed-off-by: Mauro Carvalho Chehab

Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2013-04-30T16:58:16+00:00

Pull media update from Mauro Carvalho Chehab:

 - OF documentation and patches at core and drivers, to be used by for
   embedded media systems

 - some I2C drivers used on go7007 were rewritten/promoted from staging:
   sony-btf-mpx, tw2804, tw9903, tw9906, wis-ov7640, wis-uda1342

 - add fimc-is driver (Exynos)

 - add a new radio driver: radio-si476x

 - add a two new tuners: r820t and tuner_it913x

 - split camera code on em28xx driver and add more models

 - the cypress firmware load is used outside dvb usb drivers.  So, move
   it to a common directory to make easier to re-use it

 - siano media driver updated to work with sms2270 devices

 - several work done in order to promote go7007 and solo6x1x out of
   staging (still, there are some pending issues)

 - several API compliance fixes at v4l2 drivers that don't behave as
   expected

 - as usual, lots of driver fixes, improvements, cleanups and new device
   addition at the existing drivers.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (831 commits)
  [media] cx88: make core less verbose
  [media] em28xx: fix oops at em28xx_dvb_bus_ctrl()
  [media] s5c73m3: fix indentation of the help section in Kconfig
  [media] cx25821-alsa: get rid of a __must_check warning
  [media] cx25821-video: declare cx25821_vidioc_s_std as static
  [media] cx25821-video: remove maxw from cx25821_vidioc_try_fmt_vid_cap
  [media] r820t: Remove a warning for an unused value
  [media] dib0090: Fix a warning at dib0090_set_EFUSE
  [media] dib8000: fix a warning
  [media] dib8000: Fix sub-channel range
  [media] dib8000: store dtv_property_cache in a temp var
  [media] dib8000: warning fix: declare internal functions as static
  [media] r820t: quiet gcc warning on n_ring
  [media] r820t: memory leak in release()
  [media] r820t: precendence bug in r820t_xtal_check()
  [media] videodev2.h: Remove the unused old V4L1 buffer types
  [media] anysee: Grammar s/report the/report to/
  [media] anysee: Initialize ret = 0 in anysee_frontend_attach()
  [media] media: videobuf2: fix the length check for mmap
  [media] em28xx: save isoc endpoint number for DVB only if endpoint has alt settings with xMaxPacketSize != 0
  ...

[media] dib7090p: improve the support of the dib7090 and dib7790

2013-04-22T20:15:52+00:00

The intend of this patch is to improve the support of the dib7090 and
dib7790. The AGC1 min value is set to 32768 by default. The actual AGC1 min
and the external attenuation are controled depending on the received RF
level.

Signed-off-by: Olivier Grenie 
Signed-off-by: Patrick Boettcher 
Signed-off-by: Mauro Carvalho Chehab

[media] dib7090p: remove the support for the dib7090E

2013-04-22T20:15:26+00:00

The intend of this patch is to remove the support for the dib7090E. The
DiB7090E-package has never left prototype state and never made it to
mass-prod-state.

Signed-off-by: Olivier Grenie 
Signed-off-by: Patrick Boettcher 
Signed-off-by: Mauro Carvalho Chehab

[media] dib8096: enhancement

2013-04-22T20:15:07+00:00

The intend of this patch is to improve the support of the dib8096. The PLL
parameters are not automatically computed. The limit to set/unset external
diode for attenuation has been updated. The TFE8096P board is using the
new I2C API.

Signed-off-by: Olivier Grenie 
Signed-off-by: Patrick Boettcher 
Signed-off-by: Mauro Carvalho Chehab

[media] dib8000: enhancement

2013-04-22T19:58:16+00:00

The intend of this patch is to improve the support of the dib8000.

Signed-off-by: Olivier Grenie 
Signed-off-by: Patrick Boettcher 
Signed-off-by: Mauro Carvalho Chehab

[media] m920x: Fix uninitialized variable warning

2013-03-31T14:15:35+00:00

drivers/media/usb/dvb-usb/m920x.c:91:6: warning: "ret" may be used uninitialized in this function [-Wuninitialized]
drivers/media/usb/dvb-usb/m920x.c:70:6: note: "ret" was declared here
This is real, if a remote control has an empty initialization sequence
we would get success or failure randomly.
OTOH the initialization of ret in m920x_init is needless, the function
returns with an error as soon as an error happens, so the last return
can only be a success and we can hard-code 0 there.

Signed-off-by: Jean Delvare 
Signed-off-by: Mauro Carvalho Chehab

[media] dvb-usb/dw2102: Remove duplicate inclusion of ts2020.h

2013-03-23T14:07:07+00:00

ts2020.h was included twice.

Signed-off-by: Sachin Kamat 
Signed-off-by: Mauro Carvalho Chehab

[media] dvb-usb/dvb-usb-v2: use IS_ENABLED

2013-03-23T12:33:30+00:00

Instead of checking everywhere there for 3 symbols, use instead
IS_ENABLED macro.

Signed-off-by: Mauro Carvalho Chehab

treewide: Fix typos in printk

2013-03-20T15:26:32+00:00

Correct spelling typo in various drivers.

Signed-off-by: Masanari Iida 
Signed-off-by: Jiri Kosina