linux-toradex.git/drivers/media/usb, branch master

Merge tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2026-08-19T17:09:22+00:00

Pull media updates from Mauro Carvalho Chehab:

 - v4l2-core: added ISP statistics support and per-block validation

 - v4l2-core: Allow unknown HDR10 white point and luminance

 - New camera sensors: Sony IMX678 and IMX471m, Himax HM1092 IR sensor

 - New codec: Milos: VPU v2.0 codec support

 - isp driver: gained support for Dreamchip RPPX1 ISP framework

 - vsp1 driver: gained support for RZ/T2H and RZ/N2H

 - Novalake driver: gained CVS support for new NVL hardware

 - dvb-core: fix feed leak on failed DMX_ADD_PID

 - several driver fixes, cleanups and minor improvements

* tag 'media/v7.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (308 commits)
  media: ipu-bridge: check all DMI entries when overriding sensor rotation
  media: v4l2-async: avoid deleting unlinked ASC entry on link error
  media: rzg2l-cru: Align bytesperline to hardware DMA stride requirement
  media: intel/ipu6: fix async notifier cleanup leak on parse error
  media: staging/ipu7: fix async notifier UAF on probe error path
  media: amd: isp4: fix self-deadlock in isp4sd_pwron_and_init() error path
  media: amd: isp4: release partial allocations in isp4if_alloc_fw_gpumem()
  media: rcar-isp: Fix VSPX reference leaks
  media: rcar-isp: Release ISPCORE resources
  media: i2c: imx415: Release runtime PM reference on VBLANK error
  media: i2c: imx415: Return test pattern write errors
  media: renesas: vsp1: Declare index variables in for loop statement
  media: renesas: vsp1: Make reset control optional to support platforms without a reset line
  media: dt-bindings: media: renesas,vsp1: Document RZ/T2H and RZ/N2H SoCs
  media: dt-bindings: media: renesas,fcp: Document RZ/T2H and RZ/N2H SoCs
  media: nxp: imx8-isi: Add additional 32-bit RGB format support
  media: nxp: imx8-isi: Add 16-bit raw Bayer format support
  media: nxp: imx8-isi: Implement per-stream reference counting for multiplexed streams
  media: nxp: imx8-isi: Use BIT_ULL() for 64-bit stream masks
  media: nxp: imx8-isi: Correct color map between V4L2 and ISI
  ...

media: em28xx: defer audio-only extension registration

2026-07-28T14:48:20+00:00

The audio-only path registers extensions while probing the primary device.
For a dual-TS board, this happens before dev_next is created. The duplicate
device inherits is_audio_only and is then independently inserted into
em28xx_devlist.

The list is intended to contain only primary devices: extension operations
reach the secondary device through dev_next. The independently linked
secondary can be freed during disconnect while its list node remains
reachable, resulting in a use-after-free.

Defer audio-only extension registration to the module-request work item. It
runs only after probing has completed construction of the optional
secondary device, so only the primary is registered and extension callbacks
reach the secondary through dev_next.

Fixes: 4a089668ef22 ("media: em28xx-cards: rework the em28xx probing code")
Cc: stable@vger.kernel.org
Reported-by: syzbot+a11c46f37ee083a73deb@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/66ec3c83.050a0220.29194.002f.GAE@google.com/T/
Suggested-by: Fedor Pchelkin 
Signed-off-by: Diego Fernando Mancera Gomez 
Signed-off-by: Hans Verkuil

media: remove conditional return with no effect

2026-07-28T13:17:55+00:00

Both branches of the check return the same value, so the check has
no effect. Remove it and return the value directly.

This is the result of running the Coccinelle script from
scripts/coccinelle/misc/cond_return_no_effect.cocci.

Signed-off-by: Sang-Heon Jeon 
Reviewed-by: Niklas Söderlund 
Signed-off-by: Hans Verkuil

media: usbtv: Fix V4L2 refcount leak on probe failure

2026-07-28T13:17:54+00:00

usbtv_probe() allocates usbtv before usbtv_video_init() registers its
embedded v4l2_device. v4l2_device_register() initializes the reference
count to one, with usbtv_release() providing the final cleanup.

If video_register_device() fails, usbtv_video_init() unregisters the
V4L2 device and returns an error without dropping the initial
v4l2_device reference. The probe error path then calls kfree() on usbtv
directly, leaving the reference stranded and bypassing
usbtv_release().

Leave the initialized V4L2 device intact on this failure path. After
releasing the USB reference, call v4l2_device_put() so the final
reference invokes usbtv_release(). Retain the direct kfree() path for
failures that occur before v4l2_device_register().

This issue was found by a static analysis tool I am developing.

Signed-off-by: Guangshuo Li 
Signed-off-by: Hans Verkuil

media: s2255: bound JPEG frame size before copying into the buffer

2026-07-27T12:22:07+00:00

s2255_fillbuff() memcpy()s vc->jpg_size bytes of a captured JPEG/MJPEG
frame into the vb2 plane.  vc->jpg_size is taken verbatim from the
S2255_MARKER_FRAME header the device sends (pdword[4] in save_frame())
and, unlike the frame payload length just above it, is never bounded:

	payload = le32_to_cpu(pdword[3]);
	if (payload > vc->req_image_size)	/* payload is checked ... */
		return -EINVAL;
	vc->pkt_size = payload;
	vc->jpg_size = le32_to_cpu(pdword[4]);	/* ... jpg_size is not */

A malicious or malfunctioning device can therefore report a jpg_size
larger than the destination vb2 plane, and the memcpy() writes past it.
jpg_size is a signed int, so a value with the top bit set also turns
into a huge length.

Reject a frame whose jpg_size is negative or exceeds the plane size
before copying it.

Fixes: 38f993ad8b1f ("V4L/DVB (8125): This driver adds support for the Sensoray 2255 devices.")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-8
Signed-off-by: HyeongJun An 
Signed-off-by: Hans Verkuil

media: go7007: s2250: propagate control I/O failures

2026-07-27T12:22:07+00:00

The brightness and contrast paths use oldvalue after read_reg_fp()
without checking whether the read succeeded.  A failed read leaves
oldvalue uninitialized and can write arbitrary reserved register bits.

Return read and write errors from every control path so failed hardware
access cannot be reported as a successful control update.

Signed-off-by: Yousef Alhouseen 
Signed-off-by: Hans Verkuil

media: s2255: Replace bare 'unsigned' with 'unsigned int'

2026-07-27T12:22:07+00:00

Fix 'WARNING: Prefer 'unsigned int' to bare use of 'unsigned''
reported by checkpatch.pl in s2255drv.c.

Signed-off-by: Lei Huang 
Signed-off-by: Hans Verkuil

media: s2255: Remove unnecessary braces from single-statement blocks

2026-07-27T12:22:07+00:00

Fix all 4 'WARNING: braces {} are not necessary for single statement
blocks' issues reported by checkpatch.pl in s2255drv.c. Remove braces
from single-statement if blocks where they are not needed.

Signed-off-by: Lei Huang 
Signed-off-by: Hans Verkuil

media: s2255: Remove unnecessary debug logging and out-of-memory messages

2026-07-27T12:22:07+00:00

Fix all 5 'WARNING: Unnecessary ftrace-like logging - prefer using
ftrace' issues reported by checkpatch.pl in s2255drv.c. Remove
dprintk/dev_info calls that only print the function name, as ftrace
can provide the same function tracing information.

Fix all 3 'WARNING: Possible unnecessary 'out of memory' message'
issues reported by checkpatch.pl in s2255drv.c. The kernel's memory
allocator already prints a warning on allocation failure, making
these messages redundant.

Signed-off-by: Lei Huang 
Signed-off-by: Hans Verkuil

media: s2255: Remove unnecessary return statements from void functions

2026-07-27T12:22:07+00:00

Fix all 7 'WARNING: void function return statements are not generally
useful' issues reported by checkpatch.pl in s2255drv.c. Remove
trailing 'return;' statements that immediately precede the closing
brace in void functions.

Signed-off-by: Lei Huang 
Signed-off-by: Hans Verkuil