Pull media updates from Mauro Carvalho Chehab:

 - Some cleanups at V4L2 documentation

 - new drivers: ts2020 frontend, ov9650 sensor, s5c73m3 sensor,
   sh-mobile veu mem2mem driver, radio-ma901, davinci_vpfe staging
   driver

 - Lots of missing MAINTAINERS entries added

 - several em28xx driver improvements, including its conversion to
   videobuf2

 - several fixups on drivers to make them to better comply with the API

 - DVB core: add support for DVBv5 stats, allowing the implementation of
   statistics for new standards like ISDB

 - mb86a20s: add statistics to the driver

 - lots of new board additions, cleanups, and driver improvements.

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (596 commits)
  [media] media: Add 0x3009 USB PID to ttusb2 driver (fixed diff)
  [media] rtl28xxu: Add USB IDs for Compro VideoMate U620F
  [media] em28xx: add usb id for terratec h5 rev. 3
  [media] media: rc: gpio-ir-recv: add support for device tree parsing
  [media] mceusb: move check earlier to make smatch happy
  [media] radio-si470x doc: add info about v4l2-ctl and sox+alsa
  [media] staging: media: Remove unnecessary OOM messages
  [media] sh_vou: Use vou_dev instead of vou_file wherever possible
  [media] sh_vou: Use video_drvdata()
  [media] drivers/media/platform/soc_camera/pxa_camera.c: use devm_ functions
  [media] mt9t112: mt9t111 format set up differs from mt9t112
  [media] sh-mobile-ceu-camera: fix SHARPNESS control default
  Revert "[media] fc0011: Return early, if the frequency is already tuned"
  [media] cx18/ivtv: fix regression: remove __init from a non-init function
  [media] em28xx: fix analog streaming with USB bulk transfers
  [media] stv0900: remove unnecessary null pointer check
  [media] fc0011: Return early, if the frequency is already tuned
  [media] fc0011: Add some sanity checks and cleanups
  [media] fc0011: Fix xin value clamping
  Revert "[media] [PATH,1/2] mxl5007 move reset to attach"
  ...

The "Technisat SkyStar USB plus" is a TT-connect S-2400 clone, which the
V4L-DVB drivers already support. However, some of these devices (like
mine) come with a different USB PID 0x3009 instead of 0x3006.

There have already been patches simply overwriting the USB PID in
dvb-usb-ids.h. Of course these patches were rejected because they would
have disabled the 0x3006 PID.

This new patch adds the 0x3009 PID to dvb-usb-ids.h, and adds references
to it within the ttusb2.c driver. PID 0x3006 devices will continue to work.

The only difference between the two hardware models seems to be the
EEPROM chip. In fact, Windows BDA driver names the 0x3009 device with a
"(8 kB EEPROM)" suffix. In spite of that, the 0x3009 device works
absolutely flawlessly using the existing ttusb2 driver.

Signed-off-by: Christoph Nuscheler <christoph.nuscheler@t-online.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: Alistair Buxton <a.j.buxton@gmail.com>
Acked-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

Seems to work just the same as older revisions.

Signed-off-by: Roland Scheidegger <rscheidegger_lists@hispeed.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

With the conversion to videobuf2, some unnecessary calls of
em28xx_set_alternate() have been removed. It is now called at analog streaming
start only.
This has unveiled a bug that causes USB bulk transfers to fail with all urbs
having status -EVOERFLOW.
The reason is, that for bulk transfers usb_set_interface() needs to be called
even if the previous alt setting was the same (side note: bulk transfers seem
to work only with alt=0).
While it seems to be NOT necessary for isoc transfers, it's reasonable to just
call usb_set_interface() unconditionally in em28xx_set_alternate().
Also add a comment that explains the issue to prevent regressions in the future.

Cc: stable@vger.kernel.org # for 3.8
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

tm6000_poll could use an uninitialized buf pointer. Move the buf-handling
code inside the 'if' that initializes the buf pointer.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This patch is driven by a static checker warning.
The ttusb_process_muxpack() function is only called from
ttusb_process_frame().  Before calling, it verifies that len >= 2.  The
problem is that len == 2 is not valid and would lead to an array
underflow.
Odd number values for len are also invalid and would lead to reading
past the end of the array.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The bytesperline calculation was incorrect: it used the old width instead of
the provided width. Fixed.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

The ttusb2 module is already updated to recognize the TechnoTrend CT-3650
CI DVB C/T USB2.0 receiver in addition to the Pinnacle 400e. But if
MEDIA_SUBDRV_AUTOSELECT is used, the required tuner and demodulator
modules are not automatically selected. Here's a patch to fix that and add a
note of the CT-3650 to the online help of the ttusb2 module.
This patch applies cleanly to 3.7.6 and other 3.7.x kernels.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

This allocation had no error checking.  It didn't need to be under
the mutex so I moved it out form there. That makes the error handling
easier and is a potential speed up.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>