The driver allocates the spinlock but not initialize it.
Use spin_lock_init() on it to initialize it correctly.

This is detected by Coccinelle semantic patch.

Fixes: 0f314f6c2e77 ("[media] rainshadow-cec: new RainShadow Tech HDMI
CEC driver")

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The CEC framework is used by both drm and media. That makes it tricky
to get the dependencies right.

This patch moves the CEC_CORE and MEDIA_CEC_NOTIFIER config options
out of the media menu and instead drivers that want to use CEC should
select CEC_CORE and MEDIA_CEC_NOTIFIER (if needed).

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

exit_loop is not being initialized, so it contains garbage. Ensure it is
initialized to false.

Detected by CoverityScan, CID#1436409 ("Uninitialized scalar variable")

Fixes: ea6a69defd3311 ("[media] rainshadow-cec: avoid -Wmaybe-uninitialized warning")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Pull media updates from Mauro Carvalho Chehab:
 "Media updates for v4.12-rc1:

   - new driver to support mediatek jpeg in hardware codec

   - rc-lirc, s5p-cec and st-cec staging drivers got promoted

   - hardware histogram support for vsp1 driver

   - added Virtual Media Controller driver, to make easier to test the
     media controller

   - added a new CEC driver (rainshadow-cec)

   - removed two staging LIRC drivers for obscure hardware that are too
     obsolete

   - added support for Intel SR300 Depth camera

   - some improvements at CEC and RC core

   - lots of driver cleanups, improvements all over the tree

  With this series, we're finally getting rid of the LIRC staging
  driver. There's just one left (lirc_zilog), with require more care,
  as part of its functionality (IR RX) is already provided by another
  driver. Work in progress to convert it on the proper way"

* tag 'media/v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (304 commits)
  [media] ov2640: print error if devm_*_optional*() fails
  [media] atmel-isc: Fix the static checker warning
  [media] ov2640: add support for MEDIA_BUS_FMT_YVYU8_2X8 and MEDIA_BUS_FMT_VYUY8_2X8
  [media] ov2640: fix vflip control
  [media] ov2640: fix duplicate width+height returning from ov2640_select_win()
  [media] ov2640: add missing write to size change preamble
  [media] ov2640: add information about DSP register 0xc7
  [media] ov2640: improve banding filter register definitions/documentation
  [media] ov2640: fix init sequence alignment
  [media] ov2640: make GPIOLIB an optional dependency
  [media] xc5000: fix spelling mistake: "calibration"
  [media] vidioc-queryctrl.rst: fix menu/int menu references
  [media] media-entity: only call dev_dbg_obj if mdev is not NULL
  [media] pixfmt-meta-vsp1-hgo.rst: remove spurious '-'
  [media] mtk-vcodec: avoid warnings because of empty macros
  [media] coda: bump maximum number of internal framebuffers to 17
  [media] media: mtk-vcodec: remove informative log
  [media] subdev-formats.rst: remove spurious '-'
  [media] dw2102: limit messages to buffer size
  [media] ttusb2: limit messages to buffer size
  ...

Pull i2c updates from Wilfram Sang:
 "I2C has the following updates for you:

   - an immutable cross-subsystem branch fixing PMIC access on Intel
     Baytrail

   - bigger driver updates to the designware, meson, exynos5 drivers

   - new i2c_acpi_new_device() function to create devices from ACPI

   - struct i2c_driver has now a flag 'disable_i2c_core_irq_mapping' to
     allow custom IRQ mapping in case the default does not fit

   - mux subsystem centralized error messages in its core

   - new driver for ltc4306 i2c mux

   - usual set of small updates"

* 'i2c/for-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (44 commits)
  i2c: thunderx: Enable HWMON class probing
  i2c: rcar: clarify PM handling with more comments
  i2c: rcar: fix resume by always initializing registers before transfer
  i2c: tegra: fix spelling mistake: "contoller" -> "controller"
  i2c: exynos5: use core helper to get driver data
  i2c: exynos5: de-duplicate error logs on clock setup
  i2c: exynos5: simplify clock frequency handling
  i2c: exynos5: simplify timings calculation
  i2c: designware-baytrail: fix potential null pointer dereference on dev
  i2c: designware: Get selected speed mode sda-hold-time via ACPI
  [media] cx231xx: stop double error reporting
  i2c: core: Allow drivers to disable i2c-core irq mapping
  i2c: core: Add new i2c_acpi_new_device helper function
  i2c: core: Allow getting ACPI info by index
  i2c: img-scb: use setup_timer
  i2c: i2c-scmi: add a MS HID
  i2c: mux: ltc4306: LTC4306 and LTC4305 I2C multiplexer/switch
  dt-bindings: i2c: mux: ltc4306: Add dt-bindings for I2C multiplexer/switch
  i2c: mux: reg: stop double error reporting
  i2c: mux: pinctrl: stop double error reporting
  ...

Pull documentation update from Jonathan Corbet:
 "A reasonably busy cycle for documentation this time around. There is a
  new guide for user-space API documents, rather sparsely populated at
  the moment, but it's a start. Markus improved the infrastructure for
  converting diagrams. Mauro has converted much of the USB documentation
  over to RST. Plus the usual set of fixes, improvements, and tweaks.

  There's a bit more than the usual amount of reaching out of
  Documentation/ to fix comments elsewhere in the tree; I have acks for
  those where I could get them"

* tag 'docs-4.12' of git://git.lwn.net/linux: (74 commits)
  docs: Fix a couple typos
  docs: Fix a spelling error in vfio-mediated-device.txt
  docs: Fix a spelling error in ioctl-number.txt
  MAINTAINERS: update file entry for HSI subsystem
  Documentation: allow installing man pages to a user defined directory
  Doc/PM: Sync with intel_powerclamp code behavior
  zr364xx.rst: usb/devices is now at /sys/kernel/debug/
  usb.rst: move documentation from proc_usb_info.txt to USB ReST book
  convert philips.txt to ReST and add to media docs
  docs-rst: usb: update old usbfs-related documentation
  arm: Documentation: update a path name
  docs: process/4.Coding.rst: Fix a couple of document refs
  docs-rst: fix usb cross-references
  usb: gadget.h: be consistent at kernel doc macros
  usb: composite.h: fix two warnings when building docs
  usb: get rid of some ReST doc build errors
  usb.rst: get rid of some Sphinx errors
  usb/URB.txt: convert to ReST and update it
  usb/persist.txt: convert to ReST and add to driver-api book
  usb/hotplug.txt: convert to ReST and add to driver-api book
  ...

The philips.txt file were at the wrong place: it should be,
instead, at Documentation/media.

Move and convert it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

i2c_mux_add_adapter already logs a message on failure.

Reviewed-by: Wolfram Sang <wsa@the-dreams.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Peter Rosin <peda@axentia.se>

Otherwise the i2c transfer functions can read or write beyond the end of
stack or heap buffers.

Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Otherwise ttusb2_i2c_xfer can read or write beyond the end of static and
heap buffers.

Signed-off-by: Alyssa Milburn <amilburn@zall.org>
Cc: stable@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>