linux-toradex.git/drivers/media/usb, branch v6.12

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

[tree-wide] finally take no_llseek out

2024-09-27T15:18:43+00:00

no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")

To quote that commit,

  At -rc1 we'll need do a mechanical removal of no_llseek -

  git grep -l -w no_llseek | grep -v porting.rst | while read i; do
	sed -i '/\/d' $i
  done

  would do it.

Unfortunately, that hadn't been done.  Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
	.llseek = no_llseek,
so it's obviously safe.

Signed-off-by: Al Viro 
Signed-off-by: Linus Torvalds

Merge tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

2024-09-23T22:27:58+00:00

Pull media updates from Mauro Carvalho Chehab:

 - New CEC driver: Extron DA HD 4K Plus

 - Lots of driver fixes, cleanups and improvements

* tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (179 commits)
  media: atomisp: Use clamp() in ia_css_eed1_8_vmem_encode()
  media: atomisp: Fix eed1_8 code assigning signed values to an unsigned variable
  media: atomisp: set lock before calling vb2_queue_init()
  media: atomisp: Improve binary finding debug logging
  media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]()
  media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2
  media: atomisp: add missing wait_prepare/finish ops
  media: atomisp: Remove unused declaration
  media: atomisp: use clamp() in compute_coring()
  media: atomisp: use clamp() in ia_css_eed1_8_encode()
  media: atomisp: Simplify ia_css_pipe_create_cas_scaler_desc_single_output()
  media: atomisp: Replace rarely used macro from math_support.h
  media: atomisp: Remove duplicated leftover, i.e. sh_css_dvs_info.h
  media: atomisp: bnr: fix trailing statement
  media: atomisp: move trailing */ to separate lines
  media: atomisp: move trailing statement to next line.
  media: atomisp: Fix trailing statement in ia_css_de.host.c
  media: atomisp: Fix spelling mistakes in atomisp.h
  media: atomisp: Fix spelling mistakes in atomisp_platform.h
  media: atomisp: Fix spelling mistake in csi_rx_public.h
  ...

media: Drop explicit initialization of struct i2c_device_id::driver_data to 0

2024-08-09T05:56:37+00:00

These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.

This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.

While add it, also remove commas after the sentinel entries.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Hans Verkuil

media: Revert "media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()"

2024-08-08T19:40:34+00:00

This reverts commit 2052138b7da52ad5ccaf74f736d00f39a1c9198c.

This breaks the TeVii s480 dual DVB-S2 S660. The device has a bulk in
endpoint but no corresponding out endpoint, so the device does not pass
the "has both receive and send bulk endpoint" test.

Seemingly this device does not use dvb_usb_generic_rw() so I have tried
removing the generic_bulk_ctrl_endpoint entry, but this resulted in
different problems.

As we have no explanation yet, revert.

$ dmesg | grep -i -e dvb -e dw21 -e usb\ 4
[    0.999122] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    1.023123] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    1.130247] usb 1-1: New USB device found, idVendor=9022, idProduct=d482,
+bcdDevice= 0.01
[    1.130257] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.152323] usb 4-1: New USB device found, idVendor=9022, idProduct=d481,
+bcdDevice= 0.01
[    1.152329] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.701033] dvb-usb: found a 'TeVii S480.2 USB' in cold state, will try to
+load a firmware
[    6.701178] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[    6.701179] dw2102: start downloading DW210X firmware
[    6.703715] dvb-usb: found a 'Microsoft Xbox One Digital TV Tuner' in cold
+state, will try to load a firmware
[    6.703974] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[    6.756432] usb 1-1: USB disconnect, device number 2
[    6.862119] dvb-usb: found a 'TeVii S480.2 USB' in warm state.
[    6.862194] dvb-usb: TeVii S480.2 USB error while loading driver (-22)
[    6.862209] dvb-usb: found a 'TeVii S480.1 USB' in cold state, will try to
+load a firmware
[    6.862244] dvb-usb: downloading firmware from file 'dvb-usb-s660.fw'
[    6.862245] dw2102: start downloading DW210X firmware
[    6.914811] usb 4-1: USB disconnect, device number 2
[    7.014131] dvb-usb: found a 'TeVii S480.1 USB' in warm state.
[    7.014487] dvb-usb: TeVii S480.1 USB error while loading driver (-22)
[    7.014538] usbcore: registered new interface driver dw2102

Closes: https://lore.kernel.org/stable/20240801165146.38991f60@mir/

Fixes: 2052138b7da5 ("media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()")
Reported-by: Stefan Lippers-Hollmann 
Cc: stable@vger.kernel.org
Signed-off-by: Sean Young 
Signed-off-by: Mauro Carvalho Chehab

media: uvcvideo: Fix custom control mapping probing

2024-07-22T12:22:20+00:00

Custom control mapping introduced a bug, where the filter function was
applied to every single control.

Fix it so it is only applied to the matching controls.

The following dmesg errors during probe are now fixed:

usb 1-5: Found UVC 1.00 device Integrated_Webcam_HD (0c45:670c)
usb 1-5: Failed to query (GET_CUR) UVC control 2 on unit 2: -75 (exp. 1).
usb 1-5: Failed to query (GET_CUR) UVC control 3 on unit 2: -75 (exp. 1).
usb 1-5: Failed to query (GET_CUR) UVC control 6 on unit 2: -75 (exp. 1).
usb 1-5: Failed to query (GET_CUR) UVC control 7 on unit 2: -75 (exp. 1).
usb 1-5: Failed to query (GET_CUR) UVC control 8 on unit 2: -75 (exp. 1).
usb 1-5: Failed to query (GET_CUR) UVC control 9 on unit 2: -75 (exp. 1).
usb 1-5: Failed to query (GET_CUR) UVC control 10 on unit 2: -75 (exp. 1).

Reported-by: Paul Menzel 
Closes: https://lore.kernel.org/linux-media/518cd6b4-68a8-4895-b8fc-97d4dae1ddc4@molgen.mpg.de/T/#t
Cc: stable@vger.kernel.org
Fixes: 8f4362a8d42b ("media: uvcvideo: Allow custom control mapping")
Signed-off-by: Ricardo Ribalda 
Link: https://lore.kernel.org/r/20240722-fix-filter-mapping-v2-1-7ed5bb6c1185@chromium.org
Tested-by: Paul Menzel 
Reviewed-by: Laurent Pinchart 
Signed-off-by: Laurent Pinchart

media: em28xx: Set GPIOs for non-audio boards when switching input

2024-06-29T10:20:05+00:00

Fixes changing the Line Out audio source with the video input
on MyGica UTV3 board. Previously, GPIOs were only set in
em28xx_set_audio_source(), which only boards with USB audio
support reach.

Signed-off-by: Nils Rothaug 
Signed-off-by: Sean Young 
Signed-off-by: Hans Verkuil

media: em28xx: Add support for MyGica UTV3

2024-06-29T10:20:05+00:00

The MyGica UTV3 Analog USB2.0 TV Box is a USB video capture card
that has analog TV, composite video, and FM radio inputs, an IR
remote, and provides audio only as Line Out, but not over USB.
Mine is prepared for an FM tuner, but not equipped with one.
Support for FM radio is therefore missing. The device contains:
 - Empia EM2860 USB bridge
 - Philips SAA7113 video decoder
 - NXP TDA9801T demodulator
 - Tena TNF931D-DFDR1 tuner
 - ST HCF4052 demux, switches input audio to Line Out

Signed-off-by: Nils Rothaug 
Signed-off-by: Sean Young 
Signed-off-by: Hans Verkuil

media: dvb-usb: add missing MODULE_DESCRIPTION() macros

2024-06-29T10:20:05+00:00

With ARCH=x86, make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/dvb-usb/dvb-usb-dibusb-common.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/dvb-usb/dvb-usb-dibusb-mc-common.o

Add the missing invocations of the MODULE_DESCRIPTION() macro.

Signed-off-by: Jeff Johnson 
Signed-off-by: Hans Verkuil

media: b2c2: flexcop-usb: fix flexcop_usb_memory_req

2024-06-24T09:05:07+00:00

smatch generated this warning:

drivers/media/usb/b2c2/flexcop-usb.c:199 flexcop_usb_memory_req() warn: iterator 'i' not incremented

and indeed the function is not using i or updating buf.

The reason this always worked is that this function is called to write just
6 bytes (a MAC address) to the USB device, and so in practice there is only
a single chunk written. If we ever would need to write more than one chunk,
this function would fail since each chunk would read from or write to the
same buf address.

Rewrite the function to properly handle this.

Signed-off-by: Hans Verkuil