linux-toradex.git/drivers/media/v4l2-core, branch v3.9.3

[media] fix compilation with both V4L2 and I2C as 'm'

2013-03-25T18:09:38+00:00

When config options are:
	CONFIG_VIDEO_DEV=y
	CONFIG_VIDEO_V4L2=m
	CONFIG_I2C=m

Compilation breaks, as reported by:
	https://bugzilla.kernel.org/show_bug.cgi?id=55681

Before changeset 7b34be71db533f3e0cf93d53cf62d036cdb5418a,
no compilation errors occurred. However, the I2C code there at
v4l2-device was incorrectly disabled.

Signed-off-by: Mauro Carvalho Chehab

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2013-02-27T04:16:07+00:00

Pull vfs pile (part one) from Al Viro:
 "Assorted stuff - cleaning namei.c up a bit, fixing ->d_name/->d_parent
  locking violations, etc.

  The most visible changes here are death of FS_REVAL_DOT (replaced with
  "has ->d_weak_revalidate()") and a new helper getting from struct file
  to inode.  Some bits of preparation to xattr method interface changes.

  Misc patches by various people sent this cycle *and* ocfs2 fixes from
  several cycles ago that should've been upstream right then.

  PS: the next vfs pile will be xattr stuff."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits)
  saner proc_get_inode() calling conventions
  proc: avoid extra pde_put() in proc_fill_super()
  fs: change return values from -EACCES to -EPERM
  fs/exec.c: make bprm_mm_init() static
  ocfs2/dlm: use GFP_ATOMIC inside a spin_lock
  ocfs2: fix possible use-after-free with AIO
  ocfs2: Fix oops in ocfs2_fast_symlink_readpage() code path
  get_empty_filp()/alloc_file() leave both ->f_pos and ->f_version zero
  target: writev() on single-element vector is pointless
  export kernel_write(), convert open-coded instances
  fs: encode_fh: return FILEID_INVALID if invalid fid_type
  kill f_vfsmnt
  vfs: kill FS_REVAL_DOT by adding a d_weak_revalidate dentry op
  nfsd: handle vfs_getattr errors in acl protocol
  switch vfs_getattr() to struct path
  default SET_PERSONALITY() in linux/elf.h
  ceph: prepopulate inodes only when request is aborted
  d_hash_and_lookup(): export, switch open-coded instances
  9p: switch v9fs_set_create_acl() to inode+fid, do it before d_instantiate()
  9p: split dropping the acls from v9fs_set_create_acl()
  ...

new helper: file_inode(file)

2013-02-23T04:31:31+00:00

Signed-off-by: Al Viro

[media] v4l2-core: do not enable the buffer ioctls for radio devices

2013-02-06T15:15:59+00:00

The buffer ioctls (VIDIOC_REQBUFS, VIDIOC_QUERYBUF, VIDIOC_QBUF, VIDIOC_DQBUF,
VIDIOC_EXPBUF, VIDIOC_CREATE_BUFS, VIDIOC_PREPARE_BUF) are not applicable for
radio devices. Hence, they should be set valid only for non-radio devices in
determine_valid_ioctls().

Signed-off-by: Frank Schäfer 
Acked-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

[media] use IS_ENABLED() macro

2013-02-06T11:24:09+00:00

This patch introduces the use of IS_ENABLED() macro. For example,
replacing:
 #if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
with:
 #if IS_ENABLED(CONFIG_I2C)
All changes made by this patch respect the same replacement pattern.

Reported-by: Mauro Carvalho Chehab 
Signed-off-by: Peter Senna Tschudin 
Acked-by: Antti Palosaari 
Signed-off-by: Mauro Carvalho Chehab

[media] [V2,24/24] v4l2-core/v4l2-common.c: use IS_ENABLED() macro

2013-02-06T11:20:59+00:00

replace:
 #if defined(CONFIG_MEDIA_TUNER_TEA5761) || \
     defined(CONFIG_MEDIA_TUNER_TEA5761_MODULE)
with:
 #if IS_ENABLED(CONFIG_MEDIA_TUNER_TEA5761)
This change was made for: CONFIG_MEDIA_TUNER_TEA5761
Also replaced:
 #if defined(CONFIG_I2C) || (defined(CONFIG_I2C_MODULE) && defined(MODULE))
with:
 #if IS_ENABLED(CONFIG_I2C)

Reported-by: Mauro Carvalho Chehab 
Signed-off-by: Peter Senna Tschudin 
Acked-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

[media] videobuf2: don't return POLLERR when only polling for events

2013-02-05T20:22:15+00:00

If you only poll for events, then vb2_poll will return POLLPRI | POLLERR if
no streaming is in progress. That's not right, it's perfectly valid to
poll just for events.

Cc: Pawel Osciak 
Cc: Marek Szyprowski 
Cc: Kyungmin Park 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

[media] tuner-core: map audmode to STEREO for radio devices

2013-02-05T18:55:38+00:00

Fixes a v4l2-compliance error: setting audmode to a value other than mono
or stereo for a radio device should map to MODE_STEREO.
The spec specifies that for radio devices only mono and stereo audmodes are
valid. If the user specifies another audmode in v4l2_tuner, then that should
be mapped to valid audmode. That didn't happen here.
Note that tuner drivers might decide to limit the possible audmode even
further if it only supports mono. In that case the tuner driver can set
audmode to mono. However, that new value wasn't copied back to t->audmode,
and that has been fixed as well in this patch.

Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab

[media] V4L: Add v4l2_ctrl_subdev_log_status() helper function

2013-02-05T17:17:16+00:00

This patch adds a v4l2 core helper function that can be used as
the log_status handler for subdevs that only need to log state
of the v4l2 controls owned by the subdev's control handler.

Signed-off-by: Sylwester Nawrocki 
Signed-off-by: Mauro Carvalho Chehab

[media] V4L: Add v4l2_ctrl_subdev_subscribe_event() helper function

2013-02-05T17:05:26+00:00

Add a v4l2 core helper function that can be used as the subdev
.subscribe_event handler. This allows to eliminate some boilerplate
from drivers that are only handling the control events.

Signed-off-by: Sylwester Nawrocki 
Signed-off-by: Mauro Carvalho Chehab