linux-toradex.git/drivers/media, branch v4.4.41

media: solo6x10: fix lockup by avoiding delayed register write

2017-01-09T07:07:51+00:00

commit 5fc4b067ec082c3127e0156f800769b7e0dce078 upstream.

This fixes a lockup at device probing which happens on some solo6010
hardware samples. This is a regression introduced by commit e1ceb25a1569
("[media] SOLO6x10: remove unneeded register locking and barriers")

The observed lockup happens in solo_set_motion_threshold() called from
solo_motion_config().

This extra "flushing" is not fundamentally needed for every write, but
apparently the code in driver assumes such behaviour at last in some
places.

Actual fix was proposed by Hans Verkuil.

Fixes: e1ceb25a1569 ("[media] SOLO6x10: remove unneeded register locking and barriers")

Signed-off-by: Andrey Utkin 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

dib0700: fix nec repeat handling

2016-11-18T09:48:34+00:00

commit ba13e98f2cebd55a3744c5ffaa08f9dca73bf521 upstream.

When receiving a nec repeat, ensure the correct scancode is repeated
rather than a random value from the stack.  This removes the need for
the bogus uninitialized_var() and also fixes the warnings:

    drivers/media/usb/dvb-usb/dib0700_core.c: In function ‘dib0700_rc_urb_completion’:
    drivers/media/usb/dvb-usb/dib0700_core.c:679: warning: ‘protocol’ may be used uninitialized in this function

[sean addon: So after writing the patch and submitting it, I've bought the
             hardware on ebay. Without this patch you get random scancodes
             on nec repeats, which the patch indeed fixes.]

Signed-off-by: Sean Young 
Tested-by: Sean Young 
Signed-off-by: Arnd Bergmann 
Signed-off-by: Linus Torvalds 
Signed-off-by: Greg Kroah-Hartman

cx231xx: fix GPIOs for Pixelview SBTVD hybrid

2016-10-28T07:01:30+00:00

commit 24b923f073ac37eb744f56a2c7f77107b8219ab2 upstream.

This device uses GPIOs: 28 to switch between analog and
digital modes: on digital mode, it should be set to 1.

The code that sets it on analog mode is OK, but it misses
the logic that sets it on digital mode.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

cx231xx: don't return error on success

2016-10-28T07:01:30+00:00

commit 1871d718a9db649b70f0929d2778dc01bc49b286 upstream.

The cx231xx_set_agc_analog_digital_mux_select() callers
expect it to return 0 or an error. Returning a positive value
makes the first attempt to switch between analog/digital to fail.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

mb86a20s: fix demod settings

2016-10-28T07:01:30+00:00

commit 505a0ea706fc1db4381baa6c6bd2e596e730a55e upstream.

With the current settings, only one channel locks properly.
That's likely because, when this driver was written, Brazil
were still using experimental transmissions.

Change it to reproduce the settings used by the newer drivers.
That makes it lock on other channels.

Tested with both PixelView SBTVD Hybrid (cx231xx-based) and
C3Tech Digital Duo HDTV/SDTV (em28xx-based) devices.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

mb86a20s: fix the locking logic

2016-10-28T07:01:30+00:00

commit dafb65fb98d85d8e78405e82c83e81975e5d5480 upstream.

On this frontend, it takes a while to start output normal
TS data. That only happens on state S9. On S8, the TS output
is enabled, but it is not reliable enough.

However, the zigzag loop is too fast to let it sync.

As, on practical tests, the zigzag software loop doesn't
seem to be helping, but just slowing down the tuning, let's
switch to hardware algorithm, as the tuners used on such
devices are capable of work with frequency drifts without
any help from software.

Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

gspca: avoid unused variable warnings

2016-10-07T13:23:45+00:00

commit d7e92e15e92fc987640772bf110586898b5f15aa upstream.

When CONFIG_INPUT is disabled, multiple gspca backend drivers
print compile-time warnings about unused variables:

media/usb/gspca/cpia1.c: In function 'sd_stopN':
media/usb/gspca/cpia1.c:1627:13: error: unused variable 'sd' [-Werror=unused-variable]
media/usb/gspca/konica.c: In function 'sd_stopN':
media/usb/gspca/konica.c:246:13: error: unused variable 'sd' [-Werror=unused-variable]

This annotates the variables as __maybe_unused, to let the compiler
know that they are declared intentionally.

Fixes: ee186fd96a5f ("[media] gscpa_t613: Add support for the camera button")
Fixes: c2f644aeeba3 ("[media] gspca_cpia1: Add support for button")
Fixes: b517af722860 ("V4L/DVB: gspca_konica: New gspca subdriver for konica chipset using cams")

Signed-off-by: Arnd Bergmann 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

em28xx-i2c: rt_mutex_trylock() returns zero on failure

2016-10-07T13:23:44+00:00

commit e44c153b30c9a0580fc2b5a93f3c6d593def2278 upstream.

The code is checking for negative returns but it should be checking for
zero.

Fixes: aab3125c43d8 ('[media] em28xx: add support for registering multiple i2c buses')

Signed-off-by: Dan Carpenter 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

am437x-vfpe: fix typo in vpfe_get_app_input_index

2016-09-30T08:18:35+00:00

commit 0fb504001192c1df62c847a8bb6558753c36ebef upstream.

gcc-6 points out an obviously silly comparison in vpfe_get_app_input_index():

drivers/media/platform/am437x/am437x-vpfe.c: In function 'vpfe_get_app_input_index':
drivers/media/platform/am437x/am437x-vpfe.c:1709:27: warning: self-comparison always evaluats to true [-Wtautological-compare]
       client->adapter->nr == client->adapter->nr) {
                           ^~

This was introduced in a slighly incorrect conversion, and it's
clear that the comparison was meant to compare the iterator
to the current subdev instead, as we do in the line above.

Fixes: d37232390fd4 ("[media] media: am437x-vpfe: match the OF node/i2c addr instead of name")

Signed-off-by: Arnd Bergmann 
Acked-by: Lad, Prabhakar 
Signed-off-by: Hans Verkuil 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Greg Kroah-Hartman

tda10071: Fix dependency to REGMAP_I2C

2016-09-15T06:27:48+00:00

[ Upstream commit b046d3ad38d90276379c862f15ddd99fa8739906 ]

Without I get this error for by dvb-card:
  tda10071: Unknown symbol devm_regmap_init_i2c (err 0)
  cx23885_dvb_register() dvb_register failed err = -22
  cx23885_dev_setup() Failed to register dvb adapters on VID_B

Signed-off-by: Matthias Schwarzott 
Reviewed-by: Antti Palosaari 
Signed-off-by: Mauro Carvalho Chehab 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman