linux-toradex.git/drivers/message/fusion, branch v2.6.35.3

fusion: fix kernel-doc notation

2010-05-24T14:31:20+00:00

The function name must be followed by a space, hypen, space, and a
short description.

Signed-off-by: Ben Hutchings 
Signed-off-by: Randy Dunlap 
Cc: Eric Moore 
Signed-off-by: Linus Torvalds

[SCSI] mptfusion: Bump version 03.04.15

2010-04-11T14:24:14+00:00

Upgrade version from 3.04.14 to 3.04.15

Signed-off-by: Kashyap Desai 
Signed-off-by: James Bottomley

[SCSI] mptfusion: Proper error handling is added after mpt_config timeout

2010-04-11T14:24:13+00:00

Added proper error handling after mpt_config.
Now check of MPI_IOCSTATUS_CONFIG_INVALID_PAGE is added.
If error is MPI_IOCSTATUS_CONFIG_INVALID_PAGE, driver will return -ENODEV.

Signed-off-by: Kashyap Desai 
Signed-off-by: James Bottomley

[SCSI] mptfusion: Event data alignment with 4 byte.

2010-04-11T14:24:12+00:00

event_data needs to be 4 byte aligned to makes sure there is no unaligned
memory access take place.

Signed-off-by: Kashyap Desai 
Signed-off-by: James Bottomley

[SCSI] mptfusion: Check for command status is added after completion.

2010-04-11T14:24:12+00:00

1) Corrected name string as "MPT SAS HOST"
2) Added proper check conditions for MPT_MGMT_STATUS_COMMAND_GOOD.

Signed-off-by: Kashyap Desai 
Signed-off-by: James Bottomley

[SCSI] mptfusion: Task abort is not supported for Volumes

2010-04-11T14:24:11+00:00

1) corrected return value as SUCCESS instead of 0.
2) Added check in mptscsih_abort.
mptfusion do not support task abort for Volumes.

Signed-off-by: Kashyap Desai 
Signed-off-by: James Bottomley

[SCSI] mptfusion: sanity check for vdevice pointer is added

2010-04-11T14:24:10+00:00

Added sanity checks before accessing vdevice and added vdevice->deleted
setting for mptfc.

Signed-off-by: Kashyap Desai 
Signed-off-by: James Bottomley

[SCSI] mptfusion: Setting period,offset and width for SPI driver

2010-04-11T14:24:09+00:00

Set factor, offset and width while target negotiation.

Added config timeout 60 seconds. It was missing for only
mptspi_read_spi_device_pg0

Signed-off-by: Kashyap Desai 
Signed-off-by: James Bottomley

[SCSI] mptfusion: Proper bus_type check is added

2010-04-11T14:24:09+00:00

Added proper bus_type check before processing event/ reset handler.

Signed-off-by: Kashyap Desai 
Signed-off-by: James Bottomley

[SCSI] mptfusion: mpt_detach is called properly at the time of rmmod

2010-04-11T14:24:07+00:00

Current design of mptsas is as follow.
MPTSAS will do probe() if pci id matches for available card in
system, irrespective of mode of controller. If controller is I/T mode
or I mode, things are fine. If controller is only in T mode, mptsas is
not doing complete process of mptsas_probe(). It will only make
sure IOC structure is created and IOC reference is available for
mptstm driver. Now While removing module we should take care
case of Target mode only mptsas. If we are removing IOC which is
only in Target mode, We should only detach IOC instead of
following rest of the cleanup process which is only required for T
mode controller. Now For T mode controller, only part clean up is
done instead of complete cleanup. mpt_detach will call early in case
of Target mode only controller.

Signed-off-by: Kashyap Desai 
Signed-off-by: James Bottomley