<feed xmlns='http://www.w3.org/2005/Atom'>
<title>linux-toradex.git/drivers/mfd/Kconfig, branch master</title>
<subtitle>Linux kernel for Apalis and Colibri modules</subtitle>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/'/>
<entry>
<title>mfd: ac200: Add X-Powers AC200 support</title>
<updated>2026-09-29T10:16:17+00:00</updated>
<author>
<name>James Hilliard</name>
<email>james.hilliard1@gmail.com</email>
</author>
<published>2026-09-22T16:34:35+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=1d53aa3f574b77525a39c5d9c5a32882c6f699e7'/>
<id>1d53aa3f574b77525a39c5d9c5a32882c6f699e7</id>
<content type='text'>
The X-Powers AC200 is a mixed-signal companion IC with a paged register
map accessed over I2C.

Enable and rate-lock the shared input clock, retain the vendor resume
path's 40 ms wait before creating the regmap and accessing registers, and
deassert the common reset. No minimum delay is documented. Set only the
deassert bit instead of forcing a reset cycle, avoiding a chip-wide reset
of unrelated function registers. Leave the common reset deasserted during
driver removal and system shutdown; function drivers own their block
resets. Supplier unbind still tears down linked consumers and releases
the provider's clock references.

Cache only the common page selector. Individual functions can reset
independently and invalidate their other registers, so leave all
functional registers volatile.

Register the audio codec and TV encoder using static MFD cells and
automatically assigned platform device IDs. Their firmware properties
belong to the parent node. Map their supply lookups to the parent with MFD
supply aliases, without assigning separate OF nodes to the cells.

When INTB is connected, pass its physical IRQ to the TV encoder cell.
Select a cell array without IRQ resources when INTB is absent. No regmap
IRQ controller or private IRQ domain is needed.

Configure the level-triggered INTB output, defaulting to level-low when
the upstream IRQ has no trigger type. Mask all sources before enabling
INTB. Function drivers request shared threaded IRQs before enabling their
own source, check and clear their own status, and mask their source before
freeing the IRQ. Disable INTB after removing the children on failure or
removal, while the regmap and clock are still available.

The Ethernet PHY is enumerated on its MDIO bus rather than as an MFD
child. It follows the x-powers,ac200 phandle and uses this regmap for
ancillary package-control access.

Co-developed-by: Jernej Skrabec &lt;jernej.skrabec@gmail.com&gt;
Signed-off-by: Jernej Skrabec &lt;jernej.skrabec@gmail.com&gt;
Signed-off-by: James Hilliard &lt;james.hilliard1@gmail.com&gt;
Link: https://patch.msgid.link/20260922-submit-ac200-mfd-v13-2-8832afd2481c@gmail.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The X-Powers AC200 is a mixed-signal companion IC with a paged register
map accessed over I2C.

Enable and rate-lock the shared input clock, retain the vendor resume
path's 40 ms wait before creating the regmap and accessing registers, and
deassert the common reset. No minimum delay is documented. Set only the
deassert bit instead of forcing a reset cycle, avoiding a chip-wide reset
of unrelated function registers. Leave the common reset deasserted during
driver removal and system shutdown; function drivers own their block
resets. Supplier unbind still tears down linked consumers and releases
the provider's clock references.

Cache only the common page selector. Individual functions can reset
independently and invalidate their other registers, so leave all
functional registers volatile.

Register the audio codec and TV encoder using static MFD cells and
automatically assigned platform device IDs. Their firmware properties
belong to the parent node. Map their supply lookups to the parent with MFD
supply aliases, without assigning separate OF nodes to the cells.

When INTB is connected, pass its physical IRQ to the TV encoder cell.
Select a cell array without IRQ resources when INTB is absent. No regmap
IRQ controller or private IRQ domain is needed.

Configure the level-triggered INTB output, defaulting to level-low when
the upstream IRQ has no trigger type. Mask all sources before enabling
INTB. Function drivers request shared threaded IRQs before enabling their
own source, check and clear their own status, and mask their source before
freeing the IRQ. Disable INTB after removing the children on failure or
removal, while the regmap and clock are still available.

The Ethernet PHY is enumerated on its MDIO bus rather than as an MFD
child. It follows the x-powers,ac200 phandle and uses this regmap for
ancillary package-control access.

Co-developed-by: Jernej Skrabec &lt;jernej.skrabec@gmail.com&gt;
Signed-off-by: Jernej Skrabec &lt;jernej.skrabec@gmail.com&gt;
Signed-off-by: James Hilliard &lt;james.hilliard1@gmail.com&gt;
Link: https://patch.msgid.link/20260922-submit-ac200-mfd-v13-2-8832afd2481c@gmail.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mfd: Fix MAX77705 dependency on regmap</title>
<updated>2026-09-24T14:12:29+00:00</updated>
<author>
<name>David Heidelberg</name>
<email>david@ixit.cz</email>
</author>
<published>2026-08-27T14:27:41+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=2fdae2d590a0a5ad4cd60bf8e7a6ecba7265f268'/>
<id>2fdae2d590a0a5ad4cd60bf8e7a6ecba7265f268</id>
<content type='text'>
The max77705 uses devm_regmap_add_irq_chip(), so add REGMAP_IRQ
and REGMAP_I2C to what the core driver selects in order to provide
these APIs.
This fixes a build error:

drivers/mfd/max77705.o: in function `max77705_i2c_probe':
max77705.c:(.text+0x250): undefined reference to `devm_regmap_add_irq_chip'

Cc: stable@vger.kernel.org
Fixes: c8d50f029748 ("mfd: Add new driver for MAX77705 PMIC")
Signed-off-by: David Heidelberg &lt;david@ixit.cz&gt;
Link: https://patch.msgid.link/20260827-deps-reg-max77705-v1-1-c83a74d3d428@ixit.cz
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The max77705 uses devm_regmap_add_irq_chip(), so add REGMAP_IRQ
and REGMAP_I2C to what the core driver selects in order to provide
these APIs.
This fixes a build error:

drivers/mfd/max77705.o: in function `max77705_i2c_probe':
max77705.c:(.text+0x250): undefined reference to `devm_regmap_add_irq_chip'

Cc: stable@vger.kernel.org
Fixes: c8d50f029748 ("mfd: Add new driver for MAX77705 PMIC")
Signed-off-by: David Heidelberg &lt;david@ixit.cz&gt;
Link: https://patch.msgid.link/20260827-deps-reg-max77705-v1-1-c83a74d3d428@ixit.cz
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mfd: Support for ROHM BD73800 PMIC core</title>
<updated>2026-09-23T10:31:24+00:00</updated>
<author>
<name>Matti Vaittinen</name>
<email>mazziesaccount@gmail.com</email>
</author>
<published>2026-09-16T06:09:09+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=6f6ebfdd38126edc6cd3f1427ee261d57a83fff9'/>
<id>6f6ebfdd38126edc6cd3f1427ee261d57a83fff9</id>
<content type='text'>
The BD73800 integrates regulators, ADC (intended for accumulating current /
voltage / power values), a real-time clock (RTC), clock gate and GPIOs.

Add core support for ROHM BD73800 Power Management IC.

Signed-off-by: Matti Vaittinen &lt;mazziesaccount@gmail.com&gt;
Reviewed-by: Bartosz Golaszewski &lt;bartosz.golaszewski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/3e3a25abe337e3f68cde585674019dca439ac897.1789538455.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The BD73800 integrates regulators, ADC (intended for accumulating current /
voltage / power values), a real-time clock (RTC), clock gate and GPIOs.

Add core support for ROHM BD73800 Power Management IC.

Signed-off-by: Matti Vaittinen &lt;mazziesaccount@gmail.com&gt;
Reviewed-by: Bartosz Golaszewski &lt;bartosz.golaszewski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/3e3a25abe337e3f68cde585674019dca439ac897.1789538455.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mfd: rohm: Factor out power button registration</title>
<updated>2026-07-30T13:33:08+00:00</updated>
<author>
<name>Dmitry Torokhov</name>
<email>dmitry.torokhov@gmail.com</email>
</author>
<published>2026-07-06T23:24:50+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=1b86b4ef3abf18a5324278fc03e024c10e47cfce'/>
<id>1b86b4ef3abf18a5324278fc03e024c10e47cfce</id>
<content type='text'>
Factor out the power button registration logic using software nodes
from rohm-bd718x7 and rohm-bd71828 drivers into a shared module
rohm-pwrbutton.

This reduces duplication and makes it easier to support other ROHM
PMICs with similar power button configurations.

Suggested-by: Lee Jones &lt;lee@kernel.org&gt;
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Reviewed-by: Matti Vaittinen &lt;mazziesaccount@gmail.com&gt;
Link: https://patch.msgid.link/akw4naN2Khjv8itB@google.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Factor out the power button registration logic using software nodes
from rohm-bd718x7 and rohm-bd71828 drivers into a shared module
rohm-pwrbutton.

This reduces duplication and makes it easier to support other ROHM
PMICs with similar power button configurations.

Suggested-by: Lee Jones &lt;lee@kernel.org&gt;
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov &lt;dmitry.torokhov@gmail.com&gt;
Reviewed-by: Matti Vaittinen &lt;mazziesaccount@gmail.com&gt;
Link: https://patch.msgid.link/akw4naN2Khjv8itB@google.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mfd: si476x: Modernize GPIO handling</title>
<updated>2026-07-30T13:32:34+00:00</updated>
<author>
<name>Linus Walleij</name>
<email>linusw@kernel.org</email>
</author>
<published>2026-06-08T08:57:34+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=b87549a9bbda8736b7cf98d51bdc1d148e6cd09b'/>
<id>b87549a9bbda8736b7cf98d51bdc1d148e6cd09b</id>
<content type='text'>
The SI476X driver depends on the legacy GPIO API. As it only
really use a single GPIO for reset, and this can be easily converted
to use a GPIO descriptor, modernize the driver.

The "reset" GPIO is obtained from a device property, such as a
device tree ("reset-gpios", which is standard, but this hardware has
no DT bindings as of now) or a software node for static platforms.

Out-of-tree users can easily adopt to providing a GPIO descriptor
this way.

Signed-off-by: Linus Walleij &lt;linusw@kernel.org&gt;
Reviewed-by: Bartosz Golaszewski &lt;bartosz.golaszewski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/20260608-mfd-si476x-v2-1-da5f779c1888@kernel.org
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The SI476X driver depends on the legacy GPIO API. As it only
really use a single GPIO for reset, and this can be easily converted
to use a GPIO descriptor, modernize the driver.

The "reset" GPIO is obtained from a device property, such as a
device tree ("reset-gpios", which is standard, but this hardware has
no DT bindings as of now) or a software node for static platforms.

Out-of-tree users can easily adopt to providing a GPIO descriptor
this way.

Signed-off-by: Linus Walleij &lt;linusw@kernel.org&gt;
Reviewed-by: Bartosz Golaszewski &lt;bartosz.golaszewski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/20260608-mfd-si476x-v2-1-da5f779c1888@kernel.org
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mfd: qcom: Unify user-visible "Qualcomm" name</title>
<updated>2026-06-17T10:32:27+00:00</updated>
<author>
<name>Krzysztof Kozlowski</name>
<email>krzysztof.kozlowski@oss.qualcomm.com</email>
</author>
<published>2026-04-27T07:01:10+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=1cd125db9343dde0c521562a02190088dde2bd29'/>
<id>1cd125db9343dde0c521562a02190088dde2bd29</id>
<content type='text'>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies.  Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.

Signed-off-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Acked-by: Guru Das Srinagesh &lt;linux@gurudas.dev&gt;
Link: https://patch.msgid.link/20260427070109.18271-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Various names for Qualcomm as a company are used in user-visible config
options: QCOM, Qualcomm and Qualcomm Technologies.  Switch to unified
"Qualcomm" so it will be easier for users to identify the options when
for example running menuconfig.

Signed-off-by: Krzysztof Kozlowski &lt;krzysztof.kozlowski@oss.qualcomm.com&gt;
Acked-by: Guru Das Srinagesh &lt;linux@gurudas.dev&gt;
Link: https://patch.msgid.link/20260427070109.18271-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mfd: ezx-pcap: Remove unused driver</title>
<updated>2026-06-17T10:32:14+00:00</updated>
<author>
<name>Arnd Bergmann</name>
<email>arnd@arndb.de</email>
</author>
<published>2026-04-30T16:28:05+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=e6f0018fbf1f4eabd3fb8ac71f06cb31efce3c86'/>
<id>e6f0018fbf1f4eabd3fb8ac71f06cb31efce3c86</id>
<content type='text'>
Support for the Motorola EZX phones based on Intel PXA processors was
removed in 2022, but this driver remained present in the tree. As far
as I can tell, the support was never quite functional upstream because
the board files did not actually instantiate the SPI device for the PCAP.

There are still also drivers for the various mfd cells: keys, touchscreen,
regulator and rtc, all of which are obviously orphaned as well but can
be removed separately as the Kconfig dependency now prevents them from
being enabled.

Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Closes: https://lore.kernel.org/oe-kbuild-all/202604301209.f1YXTsIr-lkp@intel.com/
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Reviewed-by: Linus Walleij &lt;linusw@kernel.org&gt;
Acked-by: Harald Welte &lt;laforge@gnumonks.org&gt;
Reviewed-by: Bartosz Golaszewski &lt;bartosz.golaszewski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/20260430162855.2029285-1-arnd@kernel.org
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Support for the Motorola EZX phones based on Intel PXA processors was
removed in 2022, but this driver remained present in the tree. As far
as I can tell, the support was never quite functional upstream because
the board files did not actually instantiate the SPI device for the PCAP.

There are still also drivers for the various mfd cells: keys, touchscreen,
regulator and rtc, all of which are obviously orphaned as well but can
be removed separately as the Kconfig dependency now prevents them from
being enabled.

Reported-by: kernel test robot &lt;lkp@intel.com&gt;
Closes: https://lore.kernel.org/oe-kbuild-all/202604301209.f1YXTsIr-lkp@intel.com/
Signed-off-by: Arnd Bergmann &lt;arnd@arndb.de&gt;
Reviewed-by: Linus Walleij &lt;linusw@kernel.org&gt;
Acked-by: Harald Welte &lt;laforge@gnumonks.org&gt;
Reviewed-by: Bartosz Golaszewski &lt;bartosz.golaszewski@oss.qualcomm.com&gt;
Link: https://patch.msgid.link/20260430162855.2029285-1-arnd@kernel.org
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mfd: simple-mfd-i2c: Add Delta TN48M CPLD support</title>
<updated>2026-01-22T14:23:23+00:00</updated>
<author>
<name>Robert Marko</name>
<email>robert.marko@sartura.hr</email>
</author>
<published>2026-01-12T16:14:52+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=8f34c1a64c5394d2b51d3fba197947dc4b0b48a0'/>
<id>8f34c1a64c5394d2b51d3fba197947dc4b0b48a0</id>
<content type='text'>
Delta TN48M switches have a Lattice CPLD that serves
multiple purposes including being a GPIO expander.

So, lets use the simple I2C MFD driver to provide the MFD core.

Also add a virtual symbol which pulls in the simple-mfd-i2c driver and
provide a common symbol on which the subdevice drivers can depend on.

Fixes: b3dcb5de6209 ("gpio: Add Delta TN48M CPLD GPIO driver")
Signed-off-by: Robert Marko &lt;robert.marko@sartura.hr&gt;
Link: https://lore.kernel.org/20220131133049.77780-2-robert.marko@sartura.hr
Link: https://lore.kernel.org/linux-gpio/20260112064950.3837737-1-rdunlap@infradead.org/
Signed-off-by: Linus Walleij &lt;linusw@kernel.org&gt;
Link: https://patch.msgid.link/20260112-mfd-tn48m-v11-1-00c798d8cd2a@kernel.org
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
Delta TN48M switches have a Lattice CPLD that serves
multiple purposes including being a GPIO expander.

So, lets use the simple I2C MFD driver to provide the MFD core.

Also add a virtual symbol which pulls in the simple-mfd-i2c driver and
provide a common symbol on which the subdevice drivers can depend on.

Fixes: b3dcb5de6209 ("gpio: Add Delta TN48M CPLD GPIO driver")
Signed-off-by: Robert Marko &lt;robert.marko@sartura.hr&gt;
Link: https://lore.kernel.org/20220131133049.77780-2-robert.marko@sartura.hr
Link: https://lore.kernel.org/linux-gpio/20260112064950.3837737-1-rdunlap@infradead.org/
Signed-off-by: Linus Walleij &lt;linusw@kernel.org&gt;
Link: https://patch.msgid.link/20260112-mfd-tn48m-v11-1-00c798d8cd2a@kernel.org
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>mfd: Kconfig: Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT</title>
<updated>2026-01-22T14:23:13+00:00</updated>
<author>
<name>Troy Mitchell</name>
<email>troy.mitchell@linux.spacemit.com</email>
</author>
<published>2025-12-25T07:46:32+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=9d1e2d5f2b24a24b32aca451d6a7feb081ad5a62'/>
<id>9d1e2d5f2b24a24b32aca451d6a7feb081ad5a62</id>
<content type='text'>
The default value of the P1 sub-device depends on the value
of P1, so P1 should have a default value here.

Signed-off-by: Troy Mitchell &lt;troy.mitchell@linux.spacemit.com&gt;
Acked-by: Alex Elder &lt;elder@riscstar.com&gt;
Link: https://patch.msgid.link/20251225-p1-kconfig-fix-v4-2-44b6728117c1@linux.spacemit.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
The default value of the P1 sub-device depends on the value
of P1, so P1 should have a default value here.

Signed-off-by: Troy Mitchell &lt;troy.mitchell@linux.spacemit.com&gt;
Acked-by: Alex Elder &lt;elder@riscstar.com&gt;
Link: https://patch.msgid.link/20251225-p1-kconfig-fix-v4-2-44b6728117c1@linux.spacemit.com
Signed-off-by: Lee Jones &lt;lee@kernel.org&gt;
</pre>
</div>
</content>
</entry>
<entry>
<title>Merge branches 'ib-mfd-clk-gpio-power-regulator-rtc-6.20', 'ib-mfd-regulator-6.20' and 'ib-mfd-rtc-6.20' into ibs-for-mfd-merged</title>
<updated>2026-01-22T14:21:19+00:00</updated>
<author>
<name>Lee Jones</name>
<email>lee@kernel.org</email>
</author>
<published>2026-01-22T14:21:19+00:00</published>
<link rel='alternate' type='text/html' href='https://git.toradex.cn/cgit/linux-toradex.git/commit/?id=70ef762fa8ca126e8ff7dfdfa7a83df46e671de7'/>
<id>70ef762fa8ca126e8ff7dfdfa7a83df46e671de7</id>
<content type='text'>
</content>
<content type='xhtml'>
<div xmlns='http://www.w3.org/1999/xhtml'>
<pre>
</pre>
</div>
</content>
</entry>
</feed>
