linux-toradex.git/drivers/mfd/axp20x-i2c.c, branch v6.11

mfd: Drop explicit initialization of struct i2c_device_id::driver_data to 0

2024-07-04T16:08:02+00:00

These drivers don't use the driver_data member of struct i2c_device_id,
so don't explicitly initialize this member.

This prepares putting driver_data in an anonymous union which requires
either no initialization or named designators. But it's also a nice
cleanup on its own.

While add it, also remove commas after the sentinel entries.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20240510211011.2273978-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones

mfd: axp20x: Add support for AXP717 PMIC

2024-03-28T09:50:59+00:00

The AXP717a is a PMIC chip produced by X-Powers, it can be connected to
an I2C or RSB bus.

It's a rather complete PMIC, with many regulators, interrupts, an ADC and
battery charging functionality. It also offer USB type-C CC pin
handling.

Describe the regmap and the MFD bits, along with the registers exposed
via I2C or RSB. This covers the regulator, interrupts and power key
devices for now.
Advertise the device using the new compatible string.

Signed-off-by: Andre Przywara 
Acked-by: Jernej Skrabec 
Tested-by: Ryan Walklin 
Link: https://lore.kernel.org/r/20240310010211.28653-4-andre.przywara@arm.com
Signed-off-by: Lee Jones

mfd: axp20x: Add support for AXP192

2023-06-15T08:19:37+00:00

The AXP192 PMIC is similar to the AXP202/AXP209, but with different
regulators, additional GPIOs, and a different IRQ register layout.

Signed-off-by: Aidan MacDonald 
Link: https://lore.kernel.org/r/20230511092609.76183-1-aidanmacdonald.0x0@gmail.com
Signed-off-by: Lee Jones

mfd: Switch i2c drivers back to use .probe()

2023-06-15T08:19:37+00:00

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20230515182752.10050-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones

mfd: axp20x: Add support for AXP313a PMIC

2023-05-25T11:35:57+00:00

The AXP313a is a PMIC chip produced by X-Powers, it can be connected via
an I2C bus.
The name AXP1530 seems to appear as well, and this is what is used in
the BSP driver. From all we know it's the same chip, just a different
name. However we have only seen AXP313a chips in the wild, so go with
this name.

Compared to the other AXP PMICs it's a rather simple affair: just three
DCDC converters, three LDOs, and no battery charging support.

Describe the regmap and the MFD bits, along with the registers exposed
via I2C. Aside from the various regulators, also describe the power key
interrupts, and adjust the shutdown handler routine to use a different
register than the other PMICs.
Eventually advertise the device using the new compatible string.

Signed-off-by: Martin Botka 
Signed-off-by: Andre Przywara 
Reviewed-by: Chen-Yu Tsai 
Link: https://lore.kernel.org/r/20230524000012.15028-2-andre.przywara@arm.com
Signed-off-by: Lee Jones

mfd: axp20x: Add support for AXP15060 PMIC

2023-04-26T14:25:25+00:00

The AXP15060 is a PMIC chip produced by X-Powers, and could be connected
via an I2C bus.

Describe the regmap and the MFD bits, along with the registers exposed
via I2C. Eventually advertise the device using a new compatible string
and add support for power off the system.

The driver would disable PEK function if IRQ is not configured in device
tree, since some boards (For example, Starfive Visionfive 2) didn't
connect IRQ line of PMIC to SOC.

GPIO function isn't enabled in this commit, since its configuration
operation is different from any existing AXP PMICs and needs
logic modification on existing driver. GPIO support might come in later
patches.

Signed-off-by: Shengyu Qu 
Reviewed-by: Krzysztof Kozlowski 
Signed-off-by: Lee Jones 
Link: https://lore.kernel.org/r/TY3P286MB261162D57695AC8164ED50E298609@TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM

mfd: axp20x-i2c: Convert to i2c's .probe_new()

2022-12-07T13:27:20+00:00

The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Lee Jones 
Link: https://lore.kernel.org/r/20221118224540.619276-423-uwe@kleine-koenig.org

i2c: Make remove callback return void

2022-08-16T10:46:26+00:00

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin 
Reviewed-by: Jeremy Kerr 
Reviewed-by: Benjamin Mugnier 
Reviewed-by: Javier Martinez Canillas 
Reviewed-by: Crt Mori 
Reviewed-by: Heikki Krogerus 
Acked-by: Greg Kroah-Hartman 
Acked-by: Marek Behún  # for leds-turris-omnia
Acked-by: Andy Shevchenko 
Reviewed-by: Petr Machata  # for mlxsw
Reviewed-by: Maximilian Luz  # for surface3_power
Acked-by: Srinivas Pandruvada  # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil  # for media/* + staging/media/*
Acked-by: Miguel Ojeda  # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli  # for versaclock5
Reviewed-by: Ajay Gupta  # for ucsi_ccg
Acked-by: Jonathan Cameron  # for iio
Acked-by: Peter Rosin  # for i2c-mux-*, max9860
Acked-by: Adrien Grassein  # for lontium-lt8912b
Reviewed-by: Jean Delvare  # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard  # for IPMI
Reviewed-by: Vladimir Oltean 
Acked-by: Dmitry Torokhov 
Acked-by: Sebastian Reichel  # for drivers/power
Acked-by: Krzysztof Hałasa 
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Wolfram Sang

mfd/bus: sunxi-rsb: Make .remove() callback return void

2021-01-15T13:23:36+00:00

The driver core ignores the return value of struct device_driver::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct sunxi_rsb_driver::remove
return void, too. All users already unconditionally return 0, this
commit makes this obvious and ensures future users don't behave
differently. To simplify even further, make axp20x_device_remove()
return void instead of returning 0 unconditionally, too.

Signed-off-by: Uwe Kleine-König 
Reviewed-by: Chen-Yu Tsai 
Signed-off-by: Lee Jones

mfd: axp20x: Skip of_device_id table when !CONFIG_OF

2020-11-27T08:02:43+00:00

The driver can match either via ACPI or OF.  Its of_device_id table is
referenced via of_match_ptr() so it will be unused for !CONFIG_OF
builds:

  drivers/mfd/axp20x-i2c.c:60:34: warning: ‘axp20x_i2c_of_match’ defined but not used [-Wunused-const-variable=]

Signed-off-by: Krzysztof Kozlowski 
Acked-by: Chen-Yu Tsai 
Signed-off-by: Lee Jones