linux-toradex.git/drivers/mfd/rc5t583.c, branch v4.10

mfd: rc5t583: Use devm_mfd_add_devices and devm_request_threaded_irq

2016-05-09T12:27:38+00:00

Use devm_mfd_add_devices() for adding MFD child devices and
devm_request_threaded_irq() for IRQ registration.

This reduces the need of remove callback for removing MFD child
devices and unregistering IRQ.

Signed-off-by: Laxman Dewangan 
Signed-off-by: Lee Jones

mfd: rc5t583: Set regmap config reg counts properly

2016-03-16T08:50:34+00:00

Regmap config max_register field should contain number of
device last register, however num_reg_defaults_raw field
should be set to register count instead
(usually one register more than max_register).

rc5t583 driver had both of these fields set to the same value,
fix this by introducing separate defines for max register
number and total count of registers.

Signed-off-by: Maciej S. Szmigiero 
Signed-off-by: Lee Jones

mfd: Drop owner assignment from i2c_drivers

2015-08-11T14:08:48+00:00

i2c_driver does not need to set an owner because i2c_register_driver()
will set it.

Signed-off-by: Krzysztof Kozlowski 
Signed-off-by: Lee Jones

mfd: Constify struct mfd_cell where possible

2014-01-06T09:13:29+00:00

As of commit 03e361b25ee8dfb1fd9b890072c23c4aae01c6c7 ("mfd: Stop setting
refcounting pointers in original mfd_cell arrays"), the "cell" parameter of
mfd_add_devices() is "const" again. Hence make all cell data passed to
mfd_add_devices() const where possible.

Signed-off-by: Geert Uytterhoeven 
Signed-off-by: Lee Jones

mfd: Use dev_get_platdata()

2013-07-31T12:01:29+00:00

Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly.

Signed-off-by: Jingoo Han 
Signed-off-by: Lee Jones

mfd: remove use of __devexit

2012-11-28T20:22:27+00:00

CONFIG_HOTPLUG is going away as an option so __devexit is no
longer needed.

Signed-off-by: Bill Pemberton 
Cc: Srinidhi Kasagar 
Cc: Peter Tyser 
Cc: Daniel Walker 
Cc: Bryan Huntsman 
Acked-by: David Brown 
Acked-by: Linus Walleij 
Acked-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

mfd: remove use of __devinit

2012-11-28T20:20:19+00:00

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.

Signed-off-by: Bill Pemberton 
Cc: Srinidhi Kasagar 
Cc: Peter Tyser 
Cc: Daniel Walker 
Cc: Bryan Huntsman 
Acked-by: David Brown 
Acked-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

mfd: remove use of __devexit_p

2012-11-28T20:16:42+00:00

CONFIG_HOTPLUG is going away as an option so __devexit_p is no longer
needed.

Signed-off-by: Bill Pemberton 
Cc: Srinidhi Kasagar 
Cc: Peter Tyser 
Cc: Daniel Walker 
Cc: Bryan Huntsman 
Acked-by: David Brown 
Acked-by: Linus Walleij 
Acked-by: Mark Brown 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

2012-10-05T03:01:30+00:00

Pull MFD changes from Samuel Ortiz:
 "MFD bits for the 3.7 merge window.

  As usual we have a few new drivers:

   - TI LP8788
   - TI OMAP USB TLL
   - Maxim MAX8907
   - SMSC ECE1099
   - Dialog Semiconductor DA9055
   - A simpler syscon driver that allow us to get rid of the anatop one.

  Drivers are also gradually getting Device Tree and IRQ domain support.

  The following drivers got DT support:
   - palmas, 88pm860x, tc3589x and twl4030-audio

  And those ones now use the IRQ domain APIs:
   - 88pm860x, tc3589x, db8500_prcmu

  Also some other interesting changes:
   - Intel's ICH LPC now supports Lynx Point
   - TI's twl4030-audio added a GPO child
   - tps6527 enabled its backlight subdevice
   - The twl6030 pwm driver moved to the new PWM subsystem

  And finally a bunch of cleanup and casual fixes for mc13xxx, 88pm860x,
  palmas, ab8500, wm8994, wm5110, max8907 and the tps65xxx family."

Fix up various annoying conflicts: the DT and IRQ domain support came in
twice and was already in 3.6. And then it was apparently rebased.

Guys, DON'T REBASE!

* tag 'mfd-3.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (89 commits)
  ARM: dts: Enable 88pm860x pmic
  mfd: 88pm860x: Move gpadc init into touch
  mfd: 88pm860x: Device tree support
  mfd: 88pm860x: Use irqdomain
  mfd: smsc: Add support for smsc gpio io/keypad driver
  backlight: tps65217_bl: Add missing platform_set_drvdata in tps65217_bl_probe
  mfd: DA9055 core driver
  mfd: tps65910: Add alarm interrupt of TPS65910 RTC to mfd device list
  mfd: wm5110: Add register patches for revision B
  mfd: wm5110: Disable control interface error report for WM5110 rev B
  mfd: max8907: Remove regulator-compatible from DT docs
  backlight: Add TPS65217 WLED driver
  mfd: Add backlight as subdevice to the tps65217
  mfd: Provide the PRCMU with its own IRQ domain
  mfd: Fix max8907 sparse warning
  mfd: Add lp8788 mfd driver
  mfd: dbx500: Provide a more accurate smp_twd clock
  mfd: rc5t583: Fix warning messages
  regulator: palmas: Add DT support
  mfd: palmas: Change regulator defns to better suite DT
  ...

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

2012-10-01T16:06:36+00:00

Pull the trivial tree from Jiri Kosina:
 "Tiny usual fixes all over the place"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (34 commits)
  doc: fix old config name of kprobetrace
  fs/fs-writeback.c: cleanup riteback_sb_inodes kerneldoc
  btrfs: fix the commment for the action flags in delayed-ref.h
  btrfs: fix trivial typo for the comment of BTRFS_FREE_INO_OBJECTID
  vfs: fix kerneldoc for generic_fh_to_parent()
  treewide: fix comment/printk/variable typos
  ipr: fix small coding style issues
  doc: fix broken utf8 encoding
  nfs: comment fix
  platform/x86: fix asus_laptop.wled_type module parameter
  mfd: printk/comment fixes
  doc: getdelays.c: remember to close() socket on error in create_nl_socket()
  doc: aliasing-test: close fd on write error
  mmc: fix comment typos
  dma: fix comments
  spi: fix comment/printk typos in spi
  Coccinelle: fix typo in memdup_user.cocci
  tmiofb: missing NULL pointer checks
  tools: perf: Fix typo in tools/perf
  tools/testing: fix comment / output typos
  ...