linux-toradex.git/drivers/mfd/rk808.c, branch v4.1.16 Linux kernel for Apalis and Colibri modules mfd: Constify of_device_id array 2015-03-26T14:20:18+00:00 Fabian Frederick fabf@skynet.be 2015-03-16T19:21:36+00:00 908725d541a46d76d488bcbacdb131b16d59331b of_device_id is always used as const. (See driver.of_match_table and open firmware functions) Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
of_device_id is always used as const.

(See driver.of_match_table and open firmware functions)

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: rk808: Disable the under voltage detect 2015-03-12T09:07:10+00:00 Chris Zhong zyw@rock-chips.com 2015-02-28T10:09:06+00:00 e19f742885e87ab9582fdf5940f214419eb9275b Rk808 has a under voltage detect function, when the voltage of buck is under 85% the target voltage, the buck output will reset. But if the power load is too heavy, this function maybe err, when current over 4.2A, although the voltage is normal, but RK808 mistakenly think it is under 85%, and reset the buck. So let's disable this function. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
Rk808 has a under voltage detect function, when the voltage of buck is
under 85% the target voltage, the buck output will reset. But if the
power load is too heavy, this function maybe err, when current over
4.2A, although the voltage is normal, but RK808 mistakenly think it is
under 85%, and reset the buck. So let's disable this function.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: rk808: Add register caching 2014-09-26T07:23:56+00:00 Doug Anderson dianders@chromium.org 2014-09-09T23:06:04+00:00 2adb3b8e6fa310d64ea6209f8ac5d5575839f6da Let's define the voltatile registers (those that can't be cached) and enable caching. The rk808 is accessed almost constantly with cpufreq so this is really nice. As measured by ftrace: before this change: cpu0_set_target() => ~2200us after this change: cpu0_set_target() => ~500us Signed-off-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
Let's define the voltatile registers (those that can't be cached) and
enable caching.  The rk808 is accessed almost constantly with cpufreq
so this is really nice.

As measured by ftrace:
  before this change: cpu0_set_target() => ~2200us
  after this change:  cpu0_set_target() =>  ~500us

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: RK808: Add new mfd driver for RK808 2014-09-26T07:15:56+00:00 Chris Zhong zyw@rock-chips.com 2014-09-03T13:51:44+00:00 f69a7cf74d5536faa180437581be2a9c0aad1bb1 The RK808 chip is a power management IC for multimedia and handheld devices. It contains the following components: - Regulators - RTC - Clkout The RK808 core driver is registered as a platform driver and provides communication through I2C with the host device for the different components. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Zhang Qing <zhangqing@rock-chips.com> Tested-by: Heiko <heiko@sntech.de> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
The RK808 chip is a power management IC for multimedia and handheld
devices. It contains the following components:

- Regulators
- RTC
- Clkout

The RK808 core driver is registered as a platform driver and provides
communication through I2C with the host device for the different
components.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Signed-off-by: Zhang Qing <zhangqing@rock-chips.com>
Tested-by: Heiko <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>