linux-toradex.git/drivers/mfd/rtl8411.c, branch v3.18-rc5 Linux kernel for Apalis and Colibri modules mfd: rtsx: Fix sparse non static symbol warning 2014-01-21T08:28:14+00:00 Wei Yongjun yongjun_wei@trendmicro.com.cn 2013-12-20T02:50:30+00:00 b5167bc466ef5a267cbd2c1acc4bfb8959d26f47 Fixes the following sparse warning: drivers/mfd/rtl8411.c:473:6: warning: symbol 'rtl8411_init_common_params' was not declared. Should it be static? Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
Fixes the following sparse warning:

drivers/mfd/rtl8411.c:473:6: warning:
 symbol 'rtl8411_init_common_params' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: rtsx: Add support for card reader rtl8402 2014-01-21T08:28:11+00:00 Micky Ching micky_ching@realsil.com.cn 2013-12-18T02:03:13+00:00 56cb3cc1872923b69fdeeb00362b7da4d6cf5590 rtl8402 is much like rtl8411, so just add it to rtl8411.c Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
rtl8402 is much like rtl8411, so just add it to rtl8411.c

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: rtsx: Add set pull control macro and simplify rtl8411 2014-01-21T08:28:11+00:00 Micky Ching micky_ching@realsil.com.cn 2013-12-18T02:03:12+00:00 0da14eeba216932db2e4b8805ab58dae72e44a45 Add set pull control macro to reduce code for setting pull control, and use a common init function to reduce code for rtl8411.c. So this patch is used to just simplify code. Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
Add set pull control macro to reduce code for setting pull control, and
use a common init function to reduce code for rtl8411.c. So this patch
is used to just simplify code.

Signed-off-by: Micky Ching <micky_ching@realsil.com.cn>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: rtsx: Prevent 'used uninitialised' warnings 2014-01-21T08:27:47+00:00 Lee Jones lee.jones@linaro.org 2013-12-03T09:26:33+00:00 4db59238906becd0047aba8293b25591dd0d018a drivers/mfd/rtl8411.c: In function 'rtl8411_fetch_vendor_settings': drivers/mfd/rtl8411.c:58:7: warning: 'reg1' is used uninitialized in this function [-Wuninitialized] drivers/mfd/rtl8411.c: In function 'rtl8411b_fetch_vendor_settings': drivers/mfd/rtl8411.c:79:7: warning: 'reg' is used uninitialized in this function [-Wuninitialized] drivers/mfd/rtl8411.c: In function 'rtl8411_fetch_vendor_settings': drivers/mfd/rtl8411.c:69:26: warning: 'reg3' may be used uninitialized in this function [-Wuninitialized] Tested-by: Micky Ching <micky_ching@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org> 
drivers/mfd/rtl8411.c: In function 'rtl8411_fetch_vendor_settings':
drivers/mfd/rtl8411.c:58:7: warning: 'reg1' is used uninitialized in this function [-Wuninitialized]
drivers/mfd/rtl8411.c: In function 'rtl8411b_fetch_vendor_settings':
drivers/mfd/rtl8411.c:79:7: warning: 'reg' is used uninitialized in this function [-Wuninitialized]
drivers/mfd/rtl8411.c: In function 'rtl8411_fetch_vendor_settings':
drivers/mfd/rtl8411.c:69:26: warning: 'reg3' may be used uninitialized in this function [-Wuninitialized]

Tested-by: Micky Ching <micky_ching@realsil.com.cn>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
mfd: mmc: rtsx: Change default tx phase 2013-08-30T12:24:07+00:00 Wei WANG wei_wang@realsil.com.cn 2013-08-21T01:46:25+00:00 84d72f9cc21d6e41c620dd34b8248734cd02d995 The default phase can meet most cards' requirement, but it is not the optimal one. In some extreme situation, the rx phase point produced by the following tuning process will drift quite a distance. Before tuning UHS card, this patch will set a more proper initial tx phase point, which is calculated from statistic data, and can achieve a much better tx signal quality. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Chris Ball <cjb@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
The default phase can meet most cards' requirement, but it is not the
optimal one. In some extreme situation, the rx phase point produced by
the following tuning process will drift quite a distance.
Before tuning UHS card, this patch will set a more proper initial tx
phase point, which is calculated from statistic data, and can achieve
a much better tx signal quality.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
mfd: rtsx: Copyright modifications 2013-08-20T08:22:01+00:00 Wei WANG wei_wang@realsil.com.cn 2013-08-20T06:18:56+00:00 09fd86780bb4603df1886e17127f5beb97f70ffb Update copyright date, remove author address and add Roger Tseng. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
Update copyright date, remove author address and add Roger Tseng.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
mfd: rtsx: Configure to enter a deeper power-saving mode in S3 2013-08-20T08:22:01+00:00 Wei WANG wei_wang@realsil.com.cn 2013-08-20T06:18:55+00:00 eb891c65c9c87e55f728d95bcc514dea337aed12 Set a bit to enable rts5227 and rts5249 to enter a deeper internal power-saving mode in S3, and recover it after resuming. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
Set a bit to enable rts5227 and rts5249 to enter a deeper internal
power-saving mode in S3, and recover it after resuming.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
mfd: rtsx: Clear hardware PFM mode in rtl8411b 2013-08-20T08:22:00+00:00 Wei WANG wei_wang@realsil.com.cn 2013-08-20T06:18:54+00:00 0ccc0065c90284f283314e52a96e76ae8a8dce0a Clear hw_pfm_en to disable hardware PFM mode, to fix a bug that in some situation registers in 0xFDxx domain can't be accessed. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
Clear hw_pfm_en to disable hardware PFM mode, to fix a bug that in some
situation registers in 0xFDxx domain can't be accessed.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
mfd: rtsx: Add shutdown callback in rtsx_pci_driver 2013-08-20T08:22:00+00:00 Wei WANG wei_wang@realsil.com.cn 2013-08-20T06:18:52+00:00 5947c167d145f32d4475d647a87e2af2699efe45 Some actions to clear power state should be handled in .shutdown callback in rtsx_pci_driver. This patch adopts the following measures to catch this goal: 1. Add a function rtsx_pci_power_off to abstract the common ops in .shutdown and .suspend 2. Add pcr->ops->force_power_down to fulfill the individual action for each reader model Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
Some actions to clear power state should be handled in .shutdown
callback in rtsx_pci_driver. This patch adopts the following measures to
catch this goal:
1. Add a function rtsx_pci_power_off to abstract the common ops in
.shutdown and .suspend
2. Add pcr->ops->force_power_down to fulfill the individual action for
each reader model

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
mfd: rtsx: Read vendor setting from config space 2013-08-20T08:22:00+00:00 Wei WANG wei_wang@realsil.com.cn 2013-08-20T06:18:51+00:00 773ccdfd9cc6f9bf8ec75a59fa742d7a663a5903 Normally OEMs will set vendor setting to the config space of Realtek card reader in BIOS stage. This patch reads the setting at the first, and configure the internal registers according to it, to improve card reader's compatibility condition. Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> 
Normally OEMs will set vendor setting to the config space of Realtek
card reader in BIOS stage. This patch reads the setting at the first,
and configure the internal registers according to it, to improve card
reader's compatibility condition.

Signed-off-by: Wei WANG <wei_wang@realsil.com.cn>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>