Pull MFD updates from Lee Jones:
 "New Support & Features:
   - Add comprehensive support for the ROHM BD72720 PMIC, including core
     MFD, regulator, GPIO, clock gate, RTC, and power-supply drivers
   - Add support for the Rockchip RK801 PMIC, including core MFD and
     regulator drivers
   - Add support for the ROHM BD73900 PMIC by leveraging existing common
     drivers
   - Wire up RTC, hwmon, and input sub-devices for the Apple SMC
     (macsmc) driver
   - Add support for the Delta Networks TN48M switch CPLD via the
     simple-mfd-i2c driver
   - Add support for the TS133 variant to the QNAP MCU driver
   - Provide support for the sama7d65 XLCD controller in the Atmel HLCDC
     driver
   - Add backlight sub-device support to the Congatec Board Controller
     (cgbc)
   - Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver

  Improvements & Fixes:
   - Implement a "wrapper regmap" for the ROHM BD72720 to handle dual
     I2C slave addresses (0x4b and 0x4c) transparently for child devices
   - Introduce mutex locking around 'mfd_of_node_list' in the MFD core
     to ensure safe concurrent access
   - Fix a potential regulator resource leak in the Arizona core driver
     during boot sequence failures
   - Resolve child device duplication issues on driver rebind for
     Qualcomm PM8xxx and OMAP USB host drivers by using
     of_platform_depopulate()
   - Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a
     unique domain suffix
   - Implement LOCK register handling for the TI TPS65214 variant to
     unlock registers at probe time
   - Fully convert the Loongson-2K BMC driver to use managed resources
     (pcim) and the standard PCI resource API
   - Ensure the Apple SMC mutex is correctly initialized during probe to
     prevent NULL pointer dereferences
   - Expand the ROHM BD71828 power-supply driver to support 9-bit
     register addresses
   - Simplify the Samsung S5M RTC driver by querying platform device IRQ
     resources directly
   - Revert an incorrect read-to-write mask change in the DA9052 SPI
     driver to restore default OTP behavior
   - Fix kernel-doc warnings in the TI TPS6105x driver

- Cleanups & Refactoring
   - Simplify the MFD core by utilizing the scoped
     for_each_child_of_node_scoped() macro and streamlining device_node
     storage
   - Rename ROHM BD71828 IC-specific entities to use consistent prefixes
     for better extensibility
   - Refactor ROHM BD71828 regmap definitions using the
     regmap_reg_range() macro
   - Update the ROHM BD71828 driver to use standard C-style comment
     headers
   - Remove the now unused 'irq_data' field from the Samsung SEC core
     structure
   - Drop unnecessary use of irqd_get_trigger_type() in the Maxim
     MAX77759 driver
   - Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected
   - Add missing charger-related registers to the ROHM BD71828 core
     header and Type-C CC registers to the AXP717

  Device Tree Binding Updates:
   - Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC,
     Bitmain BM1880 System Controller, and NXP LPC32xx System Control
     Block
   - Clarify trickle-charge terminology and add properties for voltage
     drop (VDR) correction and upper charge limits to the generic
     battery binding
   - Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for
     Aspeed SCU
   - Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102,
     pmh0101, pmk8850, etc)
   - Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom
     (Microchip), and various MediaTek SCPSYS and regulator components
   - Fix a dead link to the audio codec binding in the DA9055
     documentation"

* tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
  dt-bindings: mfd: da9055: Fix dead link to codec binding
  mfd: cgbc: Add support for backlight
  dt-bindings: mfd: qcom,spmi-pmic: Document PMICs present on Glymur and Kaanapali
  dt-bindings: mfd: Document smp-memram subnode for aspeed,ast2x00-scu
  mfd: intel-lpss: Add Intel Nova Lake-S PCI IDs
  mfd: ls2kbmc: Use PCI API instead of direct accesses
  mfd: ls2kbmc: Fully convert to use managed resources
  dt-bindings: mfd: mediatek: mt6397: Add missing MT6331 regulator compat
  dt-bindings: mfd: mediatek,mt8195-scpsys: Add mediatek,mt6795-scpsys
  dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,lan9691-flexcom
  mfd: omap-usb-host: Fix OF populate on driver rebind
  mfd: qcom-pm8xxx: Fix OF populate on driver rebind
  dt-bindings: mfd: syscon: Allow syscon compatible for mediatek,mt7981-topmisc
  mfd: qnap-mcu: Add driver data for TS133 variant
  dt-bindings: mfd: qnap,ts433-mcu: Add qnap,ts133-mcu compatible
  mfd: sec: Fix IRQ domain names duplication
  mfd: simple-mfd-i2c: Add Delta TN48M CPLD support
  mfd: macsmc: Initialize mutex
  dt-bindings: mfd: nxp: Add NXP LPC32xx System Control Block
  mfd: Kconfig: Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT
  ...

Add support for Samsung's S2MPG11 PMIC, which is a Power Management IC
for mobile applications with buck converters, various LDOs, power
meters, NTC thermistor inputs, and additional GPIO interfaces. It
typically complements an S2MPG10 PMIC in a main/sub configuration as
the sub-PMIC.

Like S2MPG10, communication is not via I2C, but via the Samsung ACPM
firmware.

While at it, we can also switch to asynchronous probe, which helps with
probe performance, as the drivers for s2mpg10 and s2mpg11 can probe in
parallel.

Note: The firmware uses the ACPM channel ID and the Speedy channel ID
to select the PMIC address. Since these are firmware properties, they
can not be retrieved from DT, but instead are deducted from the
compatible for now.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260122-s2mpg1x-regulators-v7-9-3b1f9831fffd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

For the S2MPG10 IRQ and chained IRQ, regmap IRQ will try to create a
folder with the same name which is impossible and fails with:

  debugfs: ':firmware:power-management:pmic' already exists in 'domains'

Add domain_suffix to the chained IRQ chip driver to fix it.

Fixes: ee19b52c31b3 ("mfd: sec: Use chained IRQs for s2mpg10")
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260105-s2mpg10-chained-irq-domain-suffix-v1-1-01ab16204b97@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

This was used only to allow the s5m RTC driver to deal with the alarm
IRQ. That driver now uses a different approach to acquire that IRQ, and
::irq_data doesn't need to be kept around anymore.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20260113-s5m-alarm-v3-3-855a19db1277@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

A stray and unneeded semicolon was added here by accident, just drop
it.

Fixes: ee19b52c31b3 ("mfd: sec: Use chained IRQs for s2mpg10")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202511230909.zk7EkTnb-lkp@intel.com/
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://patch.msgid.link/20251124-s2mpg10-chained-irq-semicolon-v1-1-578ba2d7adca@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

On S2MPG10 (and similar like S2MPG11), top-level interrupt status and
mask registers exist which need to be unmasked to get the PMIC
interrupts. This additional status doesn't seem to exist on other PMICs
in the S2MP* family, and the S2MPG10 driver is manually dealing with
masking and unmasking currently.

The correct approach here is to register this hierarchy as chained
interrupts, though, without any additional manual steps. Doing so will
also simplify addition of other, similar, PMICs (like S2MPG11) in the
future.

Update the driver to do just that.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20251114-s2mpg10-chained-irq-v1-1-34ddfa49c4cd@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

Use REGMAP_IRQ_REG macro helpers instead of open coding. This makes the
code a bit shorter and more obvious.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-22-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

Follow general style and use if (!arg) instead of comparing against
NULL.

While at it, drop a useless init in sec-irq.c.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-19-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

Now that sec-i2c doesn't match device type by pointer casting anymore,
we can switch the device type from unsigned long to int easily.

This saves a few bytes in struct sec_pmic_dev due to member alignment.

Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-18-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>

The commit bf231e5febcf ("mfd: sec-core: Add support for the Samsung
s2dos05") adding s2dos05 support didn't add anything related to IRQ
support, so I assume this works without IRQs.

Rather than printing a warning message in sec_irq_init() due to the
missing IRQ number, or returning an error due to a missing irq chip
regmap, just return early explicitly.

This will become particularly important once errors from sec_irq_init()
aren't ignored anymore in an upcoming patch and helps the reader of
this code while reasoning about what the intention might be here.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20250409-s2mpg10-v4-15-d66d5f39b6bf@linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>