linux-toradex.git/drivers/mfd/tps65010.c, branch v6.6-rc1

Merge tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2023-07-03T17:55:04+00:00

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add support for TI TPS6594/TPS6593/LP8764 PMICs
   - Add support for Samsung RT5033 Battery Charger
   - Add support for Analog Devices MAX77540 and MAX77541 PMICs

  New Device Support:
   - Add support for SPI to Rockchip RK808 (and friends)
   - Add support for AXP192 PMIC to X-Powers AXP20X
   - Add support for AXP313a PMIC to X-Powers AXP20X
   - Add support for RK806 to Rockchip RK8XX

  Removed Device Support:
   - Removed MFD support for Richtek RT5033 Battery

  Fix-ups:
   - Remove superfluous code
   - Switch I2C drivers from .probe_new() to .probe()
   - Convert over to managed resources (devm_*(), etc)
   - Use dev_err_probe() for returning errors from .probe()
   - Add lots of Device Tree bindings / support
   - Improve cache efficiency by switching to Maple
   - Use own exported namespaces (NS)
   - Include missing and remove superfluous headers
   - Start using / convert to the new shutdown sys-off API
   - Trivial: variable / define renaming
   - Make use of of_property_read_reg() when requesting DT 'reg's

  Bug Fixes:
   - Fix chip revision readout due to incorrect data masking
   - Amend incorrect register and mask values used for charger state
   - Hide unused functionality at compile time
   - Fix resource leaks following error handling routines
   - Return correct error values and fix error handling in general
   - Repair incorrect device names - used for device matching
   - Remedy broken module auto-loading"

* tag 'mfd-next-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (51 commits)
  dt-bindings: mfd: max77541: Add ADI MAX77541/MAX77540
  iio: adc: max77541: Add ADI MAX77541 ADC Support
  regulator: max77541: Add ADI MAX77541/MAX77540 Regulator Support
  dt-bindings: regulator: max77541: Add ADI MAX77541/MAX77540 Regulator
  mfd: Switch two more drivers back to use struct i2c_driver::probe
  dt-bindings: mfd: samsung,s5m8767: Simplify excluding properties
  mfd: stmpe: Only disable the regulators if they are enabled
  mfd: max77541: Add ADI MAX77541/MAX77540 PMIC Support
  dt-bindings: mfd: gateworks-gsc: Remove unnecessary fan-controller nodes
  mfd: core: Use of_property_read_reg() to parse "reg"
  mfd: stmfx: Nullify stmfx->vdd in case of error
  mfd: stmfx: Fix error path in stmfx_chip_init
  mfd: intel-lpss: Add missing check for platform_get_resource
  mfd: stpmic1: Add PMIC poweroff via sys-off handler
  mfd: stpmic1: Fixup main control register and bits naming
  dt-bindings: mfd: qcom,tcsr: Add the compatible for IPQ8074
  mfd: tps65219: Add support for soft shutdown via sys-off API
  mfd: pm8008: Drop bogus i2c module alias
  mfd: pm8008: Fix module autoloading
  mfd: tps65219: Add GPIO cell instance
  ...

mfd: Switch i2c drivers back to use .probe()

2023-06-15T08:19:37+00:00

After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new()
call-back type"), all drivers being converted to .probe_new() and then
03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert
back to (the new) .probe() to be able to eventually drop .probe_new() from
struct i2c_driver.

Signed-off-by: Uwe Kleine-König 
Link: https://lore.kernel.org/r/20230515182752.10050-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Lee Jones

ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1

2023-05-24T13:01:22+00:00

Aaro reports problems on the OSK1 board after we altered
the dynamic base for GPIO allocations.

It appears this happens because the OMAP driver now
allocates GPIO numbers dynamically, so all that is
references by number is a bit up in the air.

Let's bite the bullet and try to just move the gpio_chip
in the tps65010 MFD driver over to using dynamic allocations.
Alter everything in the OSK1 board file to use a GPIO
descriptor table and lookups.

Utilize the NULL device to define some board-specific
GPIO lookups and use these to immediately look up the
same GPIOs, convert to IRQ numbers and pass as resources
to the devices. This is ugly but should work.

The .setup() callback for tps65010 was used for some GPIO
hogging, but since the OSK1 is the only user in the entire
kernel we can alter the signatures to something that
is helpful and make a clean transition.

Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base")
Cc: Christophe Leroy 
Cc: andy.shevchenko@gmail.com
Cc: Andreas Kemnade 
Acked-by: Lee Jones 
Reviewed-by: Lee Jones 
Reported-by: Aaro Koskinen 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Linus Walleij

mfd: tps65010: Convert to i2c's .probe_new()

2022-12-07T13:27:25+00:00

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König 
Signed-off-by: Lee Jones 
Link: https://lore.kernel.org/r/20221118224540.619276-468-uwe@kleine-koenig.org

i2c: Make remove callback return void

2022-08-16T10:46:26+00:00

The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin 
Reviewed-by: Jeremy Kerr 
Reviewed-by: Benjamin Mugnier 
Reviewed-by: Javier Martinez Canillas 
Reviewed-by: Crt Mori 
Reviewed-by: Heikki Krogerus 
Acked-by: Greg Kroah-Hartman 
Acked-by: Marek Behún  # for leds-turris-omnia
Acked-by: Andy Shevchenko 
Reviewed-by: Petr Machata  # for mlxsw
Reviewed-by: Maximilian Luz  # for surface3_power
Acked-by: Srinivas Pandruvada  # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil  # for media/* + staging/media/*
Acked-by: Miguel Ojeda  # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli  # for versaclock5
Reviewed-by: Ajay Gupta  # for ucsi_ccg
Acked-by: Jonathan Cameron  # for iio
Acked-by: Peter Rosin  # for i2c-mux-*, max9860
Acked-by: Adrien Grassein  # for lontium-lt8912b
Reviewed-by: Jean Delvare  # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard  # for IPMI
Reviewed-by: Vladimir Oltean 
Acked-by: Dmitry Torokhov 
Acked-by: Sebastian Reichel  # for drivers/power
Acked-by: Krzysztof Hałasa 
Signed-off-by: Uwe Kleine-König 
Signed-off-by: Wolfram Sang

mfd: tps65010: Remove delcared and set, but never used variable 'status'

2020-07-06T07:32:02+00:00

'status' hasn't been checked since 2008.

It's probably safe to remove it.

Fixes W=1 warning:

 drivers/mfd/tps65010.c:407:7: warning: variable ‘status’ set but not used [-Wunused-but-set-variable]
 407 | int status;
 | ^~~~~~

Signed-off-by: Lee Jones

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 61

2019-05-24T15:36:45+00:00

Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details you
  should have received a copy of the gnu general public license along
  with this program if not write to the free software foundation inc
  675 mass ave cambridge ma 02139 usa

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 441 file(s).

Signed-off-by: Thomas Gleixner 
Reviewed-by: Michael Ellerman  (powerpc)
Reviewed-by: Richard Fontana 
Reviewed-by: Allison Randal 
Reviewed-by: Kate Stewart 
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190520071858.739733335@linutronix.de
Signed-off-by: Greg Kroah-Hartman

mfd: tps65010: Move header file out of I2C realm

2017-08-15T07:27:22+00:00

include/linux/i2c is not for client devices. Move the header file to a
more appropriate location.

Signed-off-by: Wolfram Sang 
Acked-by: Greg Kroah-Hartman 
Acked-by: Krzysztof Kozlowski 
Acked-by: Bartlomiej Zolnierkiewicz 
Acked-by: Tony Lindgren 
Signed-off-by: Lee Jones

mfd: tps65010: Use gpiochip data pointer

2016-04-19T06:58:51+00:00

This makes the driver use the data pointer added to the gpio_chip
to store a pointer to the state container instead of relying on
container_of().

Signed-off-by: Linus Walleij 
Signed-off-by: Lee Jones

mfd: tps65010: Fix init when the driver is built-in

2016-03-09T05:58:50+00:00

tps65010 driver's initcall cannot succeed when the driver is built-in,
because it expects that the I2C probe is completed at initcall time;
this cannot happen as MFD is initialized before I2C. Also on systems
where the chip is not present there is unnecessary 30 ms delay during
the boot.

Instead of waiting for probe to finish, just register the I2C device.
If some boards need retry mechanism for startup glitches, that should be
done in the actual probe function. Also delete the driver banner message.

The patch allows to use tps65010 again with OMAP1 (where it's required
to be built-in) and enables e.g. USB and LED functionality on OMAP5912 OSK.

Signed-off-by: Aaro Koskinen 
Signed-off-by: Lee Jones