Change the device name of the regulator function to the one chosen for
MODULE_ALIAS. This fixes kernel auto-module loading for the regulator function.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Mark Brown <broonie@linaro.org>

Pull mfd fixes from Samuel Ortiz:
 "This is the first batch of MFD fixes for 3.10.

  It's bigger than I would like, most of it is due to the big ab/db8500
  merge that went through during the 3.10 merge window.

  So we have:

   - Some build fixes for the tps65912 and ab8500 drivers.
   - A couple of build fixes for the the si476x driver with pre 4.3 gcc
     compilers.
   - A few runtime breakage fixes (probe failures or oopses) for the
     ab8500 and db8500 drivers.
   - Some sparse or regular gcc warning fixes for the si476x, ab8500 and
     cros_ec drivers."

* tag 'mfd-fixes-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes:
  mfd: ab8500-sysctrl: Let sysctrl driver work without pdata
  mfd: db8500-prcmu: Update stored DSI PLL divider value
  mfd: ab8500-sysctrl: Always enable pm_power_off handler
  mfd: ab8500-core: Pass GPADC compatible string to MFD core
  mfd: db8500-prcmu: Supply the pdata_size attribute for db8500-thermal
  mfd: ab8500-core: Use the correct driver name when enabling gpio/pinctrl
  mfd: ab8500: Pass AB8500 IRQ to debugfs code by resource
  mfd: ab8500-gpadc: Suppress 'ignoring regulator_enable() return value' warning
  mfd: ab8500-sysctrl: Set sysctrl_dev during probe
  mfd: ab8500-sysctrl: Fix sparse warning
  mfd: abx500-core: Fix sparse warning
  mfd: ab8500: Debugfs code depends on gpadc
  mfd: si476x: Use get_unaligned_be16() for unaligned be16 loads
  mfd: cros_ec_spi: Use %z to format pointer differences
  mfd: si476x: Do not use binary constants
  mfd: tps65912: Select MFD_CORE

A check for a valid plat->sysctrl was introduced in:

2377e52 mfd: ab8500-sysctrl: Error check clean up

but the driver works just fine even without that initialization data,
and enforcing it breaks existing platforms for no reason.

This patch removes the check and let the driver go ahead with probe.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

devm_ioremap_resource does sanity checks on the given resource. No need to
duplicate this in the driver.

Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

Previously the DSI PLL divider rate was initialised statically and
assumed to be 1. Before the common clock framework was enabled for
ux500, a call to clk_set_rate() would always update the HW registers
no matter what the current setting was.

This patch makes sure the actual hw settings and the sw assumed
settings are matched.

Signed-off-by: Paer-Olof Haakansson <par-olof.hakansson@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

AB8500 sysctrl driver implements a pm_power_off handler, but that is
currently not registered until a specific platform data field is
enabled.

This patch drops the platform data field and always registers
ab8500_power_off if no other pm_power_off handler was defined before,
and also introduces the necessary cleanup code in the driver's remove
function.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Fabio Baltieri <fabio.baltieri@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

When booting with Device Tree enabled the MFD core uses each device's
compatible string to find and allocate its associated of_node pointer,
which in turn is passed to the driver via the platform_device struct.
Without it, the driver won't be able to interrogate the Device Tree or
locate suitable regulators and will most likely fail to probe.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The MFD subsystem requires drivers to state the size of any platform
data passed, or it will fail to assign it to the device. This will
culminate in a NULL platform_data attribute and normally a failure to
probe() or a kernel Oops.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

When we're using Device Tree to enable GPIO drivers we're forced to be
OS agnostic, thus we are forbidden use names like pinctrl as they are
specific only to Linux, at least for the time being. However, when we
are registering devices using internal systems such as MFD or platform
registration, we can use such terminology. In this case we can and
should use the platform device ID mechanism to specify which device we
wish to utilise by detailing pinctrl-<device_name>.

This patch fixes a regression that when booting with Device Tree
enabled the ABx500 GPIO/Pinctrl devices are not probed.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

The AB8500 debug code which was merged in parallell with the
multiplatform work incidentally introduced a new instance using
the <mach/irqs.h> header which is now deleted, causing this
build regression:

drivers/mfd/ab8500-debugfs.c:95:23:
fatal error: mach/irqs.h: No such file or directory
compilation terminated.
make[4]: *** [drivers/mfd/ab8500-debugfs.o] Error 1

The code most certainly never worked with device tree either
since that does not rely on this kind of hard-coded interrupt
numbers.

Fix the problem at the root by passing it as a named resource
from the ab8500-core driver. Use an untyped resource to
stop the MFD core from remapping this IRQ relative to the
AB8500 irqdomain.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>