commit 3f8349e6e98ba0455437724589072523865eae5e upstream. TWL6030 family of PMIC use a shadow interrupt status register while kernel processes the current interrupt event. However, any write(0 or 1) to register INT_STS_A, INT_STS_B or INT_STS_C clears all 3 interrupt status registers. Since clear of the interrupt is done on 32k clk, depending on I2C bus speed, we could in-adverently clear the status of a interrupt status pending on shadow register in the current implementation. This is due to the fact that multi-byte i2c write operation into three seperate status register could result in multiple load and clear of status and result in lost interrupts. Instead, doing a single byte write to INT_STS_A register with 0x0 will clear all three interrupt status registers without the related risk. Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e536b62095301271d974983044a011c29fcb2ea2 upstream. Add __devinit annotation for da9052_spi_probe to fix below build warning: WARNING: drivers/built-in.o(.text+0x349b4): Section mismatch in reference from the function da9052_spi_probe() to the function .devinit.text:da9052_device_init() The function da9052_spi_probe() references the function __devinit da9052_device_init(). This is often because da9052_spi_probe lacks a __devinit annotation or the annotation of da9052_device_init is wrong. Also add __devexit annotation for da9052_spi_remove because we have __devexit_p around it in the remove callback. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d2cb87c23e8514ca49c85adc5924999927bb9494 upstream. The jack detection on WM1811 is often required during system suspend, add it as another check when deciding if we should suspend. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It should be marked as readable but wasn't, breaking DC servo operation. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
irq_base of the tps65912 irq platform data should be initialized with the board provided irq_base data. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The code is currently always checking the first resource of every device only (several times.) This has been broken since the ACPI check was added in February 2010 in commit 91fedede0338eb6203cdd618d8ece873fdb7c22c. Fix the check to run on each resource individually, once. Signed-off-by: Jean Delvare <khali@linux-fr.org> Cc: stable@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
We were not freeing the irq properly in the error path in the AB8500 driver. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
The jack detection on WM1811 is often required during system suspend, add it as another check when deciding if we should suspend. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@vger.kernel.org Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
irq_base of the tps65910 irq platform data should be initialized with the board provided irq_base data. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch checks for pdata to using it. Signed-off-by: Jonghwan Choi <jhbird.choi@samsung.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>