linux-toradex.git/drivers/mfd, branch v4.4.103

mfd: axp20x: Fix axp288 PEK_DBR and PEK_DBF irqs being swapped

2017-11-08T09:06:29+00:00

[ Upstream commit 1af468ebe45591651ec3bafc2e9ddc6fdef70ae0 ]

The R in PEK_DBR stands for rising, so it should be mapped to
AXP288_IRQ_POKP where the last P stands for positive edge.

Likewise PEK_DBF should be mapped to the falling edge, aka the
_N_egative edge, so it should be mapped to AXP288_IRQ_POKN.

This fixes the inverted powerbutton status reporting by the
axp20x-pek driver.

Signed-off-by: Hans de Goede 
Acked-by: Chen-Yu Tsai 
Signed-off-by: Lee Jones 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

mfd: ab8500-sysctrl: Handle probe deferral

2017-11-08T09:06:29+00:00

[ Upstream commit 7e9c40c63933a643908d686bd89dfc2315e8c70a ]

In the current boot, clients making use of the AB8500 sysctrl
may be probed before the ab8500-sysctrl driver. This gives them
-EINVAL, but should rather give -EPROBE_DEFER.

Before this, the abx500 clock driver didn't probe properly,
and as a result the codec driver in turn using the clocks did
not probe properly. After this patch, everything probes
properly.

Also add OF compatible-string probing. This driver is all
device tree, so let's just make a drive-by-fix of that as
well.

Signed-off-by: Linus Walleij 
Signed-off-by: Lee Jones 
Signed-off-by: Sasha Levin 
Signed-off-by: Greg Kroah-Hartman

mfd: omap-usb-tll: Fix inverted bit use for USB TLL mode

2017-06-26T05:13:09+00:00

commit 8b8a84c54aff4256d592dc18346c65ecf6811b45 upstream.

Commit 16fa3dc75c22 ("mfd: omap-usb-tll: HOST TLL platform driver")
added support for USB TLL, but uses OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF
bit the wrong way. The comments in the code are correct, but the inverted
use of OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF causes the register to be
enabled instead of disabled unlike what the comments say.

Without this change the Wrigley 3G LTE modem on droid 4 EHCI bus can
be only pinged few times before it stops responding.

Fixes: 16fa3dc75c22 ("mfd: omap-usb-tll: HOST TLL platform driver")
Signed-off-by: Tony Lindgren 
Acked-by: Roger Quadros 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: core: Fix device reference leak in mfd_clone_cell

2016-11-26T08:54:53+00:00

commit 722f191080de641f023feaa7d5648caf377844f5 upstream.

Make sure to drop the reference taken by bus_find_device_by_name()
before returning from mfd_clone_cell().

Fixes: a9bbba996302 ("mfd: add platform_device sharing support for mfd")
Signed-off-by: Johan Hovold 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: intel-lpss: Do not put device in reset state on suspend

2016-11-26T08:54:52+00:00

commit 274e43edcda6f709aa67e436b3123e45a6270923 upstream.

Commit 41a3da2b8e163 ("mfd: intel-lpss: Save register context on
suspend") saved the register context while going to suspend and
also put the device in reset state.

Due to the resetting of device, system cannot enter S3/S0ix
states when no_console_suspend flag is enabled. The system
and serial console both hang. The resetting of device is not
needed while going to suspend. Hence remove this code.

Fixes: 41a3da2b8e163 ("mfd: intel-lpss: Save register context on suspend")
Signed-off-by: Azhar Shaikh 
Acked-by: Mika Westerberg 
Reviewed-by: Andy Shevchenko 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: wm8350-i2c: Make sure the i2c regmap functions are compiled

2016-10-16T15:36:14+00:00

commit 88003fb10f1fc606e1704611c62ceae95fd1d7da upstream.

This fixes a compile failure:

	drivers/built-in.o: In function `wm8350_i2c_probe':
	core.c:(.text+0x828b0): undefined reference to `__devm_regmap_init_i2c'
	Makefile:953: recipe for target 'vmlinux' failed

Fixes: 52b461b86a9f ("mfd: Add regmap cache support for wm8350")
Signed-off-by: Uwe Kleine-König 
Acked-by: Charles Keepax 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: atmel-hlcdc: Do not sleep in atomic context

2016-10-16T15:36:14+00:00

commit 2c2469bc03d569c49119db2cccb5cb3f0c6a5b33 upstream.

readl_poll_timeout() calls usleep_range(), but
regmap_atmel_hlcdc_reg_write() is called in atomic context (regmap
spinlock held).

Replace the readl_poll_timeout() call by readl_poll_timeout_atomic().

Fixes: ea31c0cf9b07 ("mfd: atmel-hlcdc: Implement config synchronization")
Signed-off-by: Boris Brezillon 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: rtsx_usb: Avoid setting ucr->current_sg.status

2016-10-16T15:36:14+00:00

commit 8dcc5ff8fcaf778bb57ab4448fedca9e381d088f upstream.

Member "status" of struct usb_sg_request is managed by usb core. A
spin lock is used to serialize the change of it. The driver could
check the value of req->status, but should avoid changing it without
the hold of the spinlock. Otherwise, it could cause race or error
in usb core.

This patch could be backported to stable kernels with version later
than v3.14.

Cc: Alan Stern 
Cc: Roger Tseng 
Signed-off-by: Lu Baolu 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: qcom_rpm: Parametrize also ack selector size

2016-08-20T16:09:18+00:00

commit f37be01e6dc606f2fcc5e95c9933d948ce19bd35 upstream.

The RPM has two sets of selectors (IPC bit fields): request and
acknowledge. Apparently, some models use 4*32 bit words for select
and some use 7*32 bit words for request, but all use 7*32 words
for acknowledge bits.

So apparently you can on the models with requests of 4*32 select
bits send 4*32 messages and get 7*32 different replies, so on ACK
interrupt, 7*32 bit words need to be read. This is how the vendor
code apparently works.

Reported-by: Stephen Boyd 
Signed-off-by: Linus Walleij 
Reviewed-by: Bjorn Andersson 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman

mfd: qcom_rpm: Fix offset error for msm8660

2016-08-20T16:09:18+00:00

commit 9835f1b70bb3890d38308b9be4fb9d7451ba67f1 upstream.

The RPM in MSM8660/APQ8060 has different offsets to the selector
ACK and request context ACK registers. Make all these register
offsets part of the per-SoC data and assign the right values.

The bug was found by verifying backwards to the vendor tree in
the out-of-tree files : all were using
offsets 3,11,15,23 and a select size of 4, except the MSM8660/APQ8060
which was using offsets 3,11,19,27 and a select size of 7.

All other platforms apart from msm8660 were affected by reading
excess registers, since 7 was hardcoded as the number of select
words, this patch makes also this part dynamic so we only write/read
as many select words as the platform actually use.

Symptoms of this bug when using msm8660: the first RPM transaction
would work, but the next would stall or raise an error since the
previous transaction was not properly ACKed as the ACK words were
read at the wrong offset.

Fixes: 58e214382bdd ("mfd: qcom-rpm: Driver for the Qualcomm RPM")
Signed-off-by: Linus Walleij 
Reviewed-by: Björn Andersson 
Signed-off-by: Lee Jones 
Signed-off-by: Greg Kroah-Hartman