Pull MFD updates from Lee Jones:
 "Core framework:
   - Add the MFD bindings doc to MAINTAINERS

  New drivers:
   - X-Powers AC100 Audio CODEC and RTC
   - TI LP873x PMIC
   - Rockchip RK808 PMIC
   - Samsung Exynos Low Power Audio

  New device support:
   - Add support for STMPE1600 variant to stmpe
   - Add support for PM8018 PMIC to pm8921-core
   - Add support for AXP806 PMIC in axp20x
   - Add support for AXP209 GPIO in axp20x

  New functionality:
   - Add support for Reset to all STMPE variants
   - Add support for MKBP event support to cros_ec
   - Add support for USB to intel_soc_pmic_bxtwc
   - Add support for IRQs and Power Button to tps65217

  Fix-ups:
   - Clean-up defunct author emails (da9063, max14577)
   - Kconfig fixups (wm8350-i2c, as37220
   - Constify (altera-a10sr, sm501)
   - Supply PCI IDs (intel-lpss-pci)
   - Improve clocking (qcom_rpm)
   - Fix IRQ probing (ucb1x00-core)
   - Ensure fault log is cleared (da9052)
   - Remove NO_IRQ check (ucb1x00-core)
   - Supply I2C properties (intel-lpss-acpi, intel-lpss-pci)
   - Non standard declaration (tps65217, max8997-irq)
   - Remove unused code (lp873x, db8500-prcmu, ab8500-debugfs,
     cros_ec_spi)
   - Make non-modular (altera-a10sr, intel_msic, smsc-ece1099,
     sun6i-prcm, twl-core)
   - OF bindings (ac100, stmpe, qcom-pm8xxx, qcom-rpm, rk808, axp20x,
     lp873x, exynos5433-lpass, act8945a, aspeed-scu, twl6040, arizona)

  Bugfixes:
   - Release OF pointer (qcom_rpm)
   - Avoid double shifting in suspend/resume (88pm80x)
   - Fix 'defined but not used' error (exynos-lpass)
   - Fix 'sleeping whilst attomic' (atmel-hlcdc)"

* tag 'mfd-for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
  mfd: arizona: Handle probe deferral for reset GPIO
  mfd: arizona: Remove arizona_of_get_named_gpio helper function
  mfd: arizona: Add DT options for max_channels_clocked and PDM speaker config
  mfd: twl6040: Register child device for twl6040-pdmclk
  mfd: cros_ec_spi: Remove unused variable 'request'
  mfd: omap-usb-host: Return value is not 'const int'
  mfd: ab8500-debugfs: Remove 'weak' function suspend_test_wake_cause_interrupt_is_mine()
  mfd: ab8500-debugfs: Remove ab8500_dump_all_banks_to_mem()
  mfd: db8500-prcmu: Remove unused *prcmu_set_ddr_opp() calls
  mfd: ab8500-debugfs: Prevent initialised field from being over-written
  mfd: max8997-irq: 'inline' should be at the beginning of the declaration
  mfd: rk808: Fix RK818_IRQ_DISCHG_ILIM initializer
  mfd: tps65217: Fix nonstandard declaration
  mfd: lp873x: Remove unused mutex lock from struct lp873x
  mfd: atmel-hlcdc: Do not sleep in atomic context
  mfd: exynos-lpass: Mark PM functions as __maybe_unused
  mfd: intel-lpss: Add default I2C device properties for Apollo Lake
  mfd: twl-core: Make it explicitly non-modular
  mfd: sun6i-prcm: Make it explicitly non-modular
  mfd: smsc-ece1099: Make it explicitly non-modular
  ...

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.9 series:

  Subsystem improvements:

   - do away with the last users of the obsolete Kconfig options
     ARCH_REQUIRE_GPIOLIB and ARCH_WANT_OPTIONAL_GPIOLIB (the latter
     always sounded like an item on a wishlist to Santa Claus to me). We
     can now select GPIOLIB and be done with it, for all archs. After
     some struggle it even work on UM. Not that it has GPIO, but if it
     wants to, it can select the library.

   - continued efforts to make drivers properly either tristate or bool.

   - introduce a warning for drivers assigning default triggers to their
     irqchip lines when probed from device tree, so we find and fix
     these ambigous drivers. It is agreed that in the OF config path,
     the device tree defines trigger characteristics.

   - the same warning, mutatis mutandis, for ACPI-probed GPIO irqchips.

   - we introduce the ability to mark certain IRQ lines as "unusable" as
     they can be taken by BIOS/firmware, unrouted in silicon and
     generally nasty if you use them, and such things. This is put to
     good use in the STMPE driver and also in the Cherryview pin control
     driver.

   - a new "mockup" virtual GPIO device that can be used for testing.
     The plan is to add unit tests under tools/* for exercising this
     device and verify that the kernel code paths are working as they
     should.

   - make memory-mapped I/O-drivers depend on HAS_IOMEM. This was
     implicit all the time, but when people started building UM with
     allyesconfig or allmodconfig it exploded in their face.

   - move some stray bits of device tree and ACPI HW description
     callbacks down into their respective implementation silo. These
     were causing issues when compiling on !HAS_IOMEM as well, so now
     eventually UM compiles the GPIOLIB library if it wants to.

  New drivers:

   - new driver for the Aspeed GPIO front-end companion to the pin
     controller merged through the pin control tree.

   - new driver for the LP873x PMIC GPIO portions.

   - new driver for Technologic Systems' I2C FPGA GPIO such as TS4900,
     TS-7970, TS-7990 and TS-4100.

   - new driver for the Broadcom BCM63xx series including BCM6338 and
     BCM6345.

   - new driver for the Intel WhiskeyCove PMIC GPIO.

   - new driver for the Allwinner AXP209 PMIC GPIO portions.

   - new driver for Diamond Systems 48 line GPIO-MM, another of these
     port-mapped I/O expansion cards.

   - support the STMicroelectronics STMPE1600 variant in the STMPE
     driver.

  Driver improvements:

   - the STMPE driver now supports rising/falling edge detection
     properly for IRQs.

   - the PCA954x will now fetch and enable its VCC regulator properly.

   - major rework of the PCA953x driver with the goal of eventually
     switching it over to use regmap and thus modernize it even more.

   - switch the IOP driver to use the generic MMIO GPIO library.

   - move the ages old HTC EGPIO (extended GPIO) GPIO expander driver
     over to this subsystem from MFD, achieveing some separation of
     concerns"

* tag 'gpio-v4.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (81 commits)
  gpio: add missing static inline
  gpio: OF: localize some gpiochip init functions
  gpio: acpi: separation of concerns
  gpio: OF: separation of concerns
  gpio: make memory-mapped drivers depend on HAS_IOMEM
  gpio: stmpe: use BIT() macro
  gpio: stmpe: forbid unused lines to be mapped as IRQs
  mfd/gpio: Move HTC GPIO driver to GPIO subsystem
  gpio: MAINTAINERS: Add an entry for GPIO mockup driver
  gpio/mockup: add virtual gpio device
  gpio: Added zynq specific check for special pins on bank zero
  gpio: axp209: Implement get_direction
  gpio: aspeed: remove redundant return value check
  gpio: loongson1: remove redundant return value check
  ARM: omap2: fix missing include
  gpio: tc3589x: fix up complaints on unsigned
  gpio: tc3589x: add .get_direction() and small cleanup
  gpio: f7188x: use gpiochip_get_data instead of container_of
  gpio: tps65218: use devm_gpiochip_add_data() for gpio registration
  gpio: aspeed: fix return value check in aspeed_gpio_probe()
  ...

Pull regulator updates from Mark Brown:
 "This is an extremely quiet release for the regulator API, we've got a
  small set of bug fixes and minor feature enhancements for drivers plus
  a couple of more visible changes:

   - add support for ramp times in regulators that don't use selectors.

   - new driver for LTC3676"

* tag 'regulator-v4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: dbx500: remove unused functions in dbx500-prcmu.c
  regulator: pv88080: Update regulator for PV88080 BB silicon support
  regulator: core: don't return error with inadequate reason
  regulator: tps65910: Work around silicon erratum SWCZ010
  regulator: core: Add set_voltage_time op
  regulator: core: Don't skip set_voltage_time when ramp delay disabled
  regulator: core: Simplify error flow in _regulator_do_set_voltage()
  regulator: core: Use local ops variable in _regulator_do_set_voltage()
  regulator: hi6421: mark hi6421_regulator_ldo_get_optimum_mode() static
  regulator: Kconfig: Fix typo
  regulator: bindings: Use the correct symbol for second
  regulator: Remove support for optional supplies in the bulk API
  regulator: Add LTC3676 support
  regulator: rk808: Delete owner assignment
  regulator: tps65218: do not disable DCDC3 during poweroff on broken PMICs
  mfd: tps65218: add version check to the PMIC probe

The Arizona CODECs will generally function correctly without a reset line
although it is strongly advised to have one, as such we do allow the system
to boot if the reset gpio is missing or incorrectly specified.  However
we should fail probe if we get a probe deferral request, this patch adds
handling for this case.

Reported-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

This function is only used in a single place and no new users will be
added as all the devices other required GPIOs are already handled. As
such just merge the code back into the calling function.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>

This patch adds DT settings for the max_channels_clocked, spk_fmt and
spk_mute pdata.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

The McPDM in OMAP4/5 is using the pdmclk from twl6040 as functional clock.
The twl6040-pdmclk driver provides a clock which can be used to make sure
that the pdmclk is active when the McPDM is in use.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Signed-off-by: Lee Jones <lee.jones@linaro.org>

Change from 'const int' to just 'int'.

Cc: <robh+dt@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

There are no other functions which can over-ride it.

Signed-off-by: Lee Jones <lee.jones@linaro.org>