linux-toradex.git/drivers/misc/Kconfig, branch v5.10-rc6

misc: mic: remove the MIC drivers

2020-10-28T18:12:03+00:00

This patch removes the MIC drivers from the kernel tree
since the corresponding devices have been discontinued.

Removing the dma and char-misc changes in one patch and
merging via the char-misc tree is best to avoid any
potential build breakage.

Cc: Nikhil Rao 
Reviewed-by: Ashutosh Dixit 
Signed-off-by: Sudeep Dutt 
Acked-By: Vinod Koul 
Reviewed-by: Sherry Sun 
Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com
Signed-off-by: Greg Kroah-Hartman

misc: Kconfig: fix a HISI_HIKEY_USB dependency

2020-10-08T07:21:33+00:00

The dependency should be just USB_ROLE_SWITCH, instead
of CONFIG_USB_ROLE_SWITCH.

Fixes: 2827d98bc5d6 ("misc: Kconfig: add a new dependency for HISI_HIKEY_USB")
Reported-by: Nathan Chancellor 
Reviewed-by: Nathan Chancellor 
Signed-off-by: Mauro Carvalho Chehab 
Link: https://lore.kernel.org/r/0b6dff854c4bb412c2c11f17803e84d61385415f.1602138248.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman

misc: Kconfig: add a new dependency for HISI_HIKEY_USB

2020-10-07T07:23:20+00:00

As warned by Randy:

	on x86_64:
	CONFIG_USB_ROLE_SWITCH=m
	and HISI_HIKEY_USB=y.

	ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_remove':
	hisi_hikey_usb.c:(.text+0x61): undefined reference to `usb_role_switch_unregister'
	ld: hisi_hikey_usb.c:(.text+0xa4): undefined reference to `usb_role_switch_put'
	ld: drivers/misc/hisi_hikey_usb.o: in function `hub_usb_role_switch_set':
	hisi_hikey_usb.c:(.text+0xd3): undefined reference to `usb_role_switch_get_drvdata'
	ld: drivers/misc/hisi_hikey_usb.o: in function `relay_set_role_switch':
	hisi_hikey_usb.c:(.text+0x54d): undefined reference to `usb_role_switch_set_role'
	ld: drivers/misc/hisi_hikey_usb.o: in function `hisi_hikey_usb_probe':
	hisi_hikey_usb.c:(.text+0x8a5): undefined reference to `usb_role_switch_get'
	ld: hisi_hikey_usb.c:(.text+0xa08): undefined reference to `usb_role_switch_register'
	ld: hisi_hikey_usb.c:(.text+0xa6e): undefined reference to `usb_role_switch_put'

Make it dependent on CONFIG_USB_ROLE_SWITCH.

Reported-by: Randy Dunlap 
Acked-by: Randy Dunlap  # build-tested
Signed-off-by: Mauro Carvalho Chehab 
Link: https://lore.kernel.org/r/0e49432d0db9ee8429a9923a1d995935b6b83552.1602047370.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman

misc: hisi_hikey_usb: add support for Hikey 970

2020-09-10T16:56:41+00:00

The HiKey 970 board is similar to Hikey 960 with regards
to its USB configutation: it also relies on a USB HUB
that is used when DWC3 is at host mode.

However, it requires a few extra DT settings, as it
uses a voltage regulator and GPIO reset pin.

Add support for them.

Signed-off-by: Mauro Carvalho Chehab 
Link: https://lore.kernel.org/r/62843df9927b4d8dac5dc7c4a189567fa52ab2bb.1599717402.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman

misc: hisi_hikey_usb: Driver to support onboard USB gpio hub on Hikey960

2020-09-10T16:56:38+00:00

The HiKey960 has a fairly complex USB configuration due to it
needing to support a USB-C port for host/device mode and multiple
USB-A ports in host mode, all using a single USB controller.

See schematics here:
  https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf

This driver acts as a usb-role-switch intermediary, intercepting
the role switch notifications from the tcpm code, and passing
them on to the dwc3 core.

In doing so, it also controls the onboard hub and power gpios in
order to properly route the data lines between the USB-C port
and the onboard hub to the USB-A ports.

Signed-off-by: Yu Chen 
[jstultz: Major rework to make the driver a usb-role-switch
          intermediary]
Signed-off-by: John Stultz 
Signed-off-by: Mauro Carvalho Chehab 
Link: https://lore.kernel.org/r/c263f72e1d803c18c45a69ce2c333e79a7ed89ff.1599717402.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman

Merge tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-08-05T18:43:47+00:00

Pull char/misc driver updates from Greg KH:
 "Here is the large set of char and misc and other driver subsystem
  patches for 5.9-rc1. Lots of new driver submissions in here, and
  cleanups and features for existing drivers.

  Highlights are:
   - habanalabs driver updates
   - coresight driver updates
   - nvmem driver updates
   - huge number of "W=1" build warning cleanups from Lee Jones
   - dyndbg updates
   - virtbox driver fixes and updates
   - soundwire driver updates
   - mei driver updates
   - phy driver updates
   - fpga driver updates
   - lots of smaller individual misc/char driver cleanups and fixes

  Full details are in the shortlog.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (322 commits)
  habanalabs: remove unused but set variable 'ctx_asid'
  nvmem: qcom-spmi-sdam: Enable multiple devices
  dt-bindings: nvmem: SID: add binding for A100's SID controller
  nvmem: update Kconfig description
  nvmem: qfprom: Add fuse blowing support
  dt-bindings: nvmem: Add properties needed for blowing fuses
  dt-bindings: nvmem: qfprom: Convert to yaml
  nvmem: qfprom: use NVMEM_DEVID_AUTO for multiple instances
  nvmem: core: add support to auto devid
  nvmem: core: Add nvmem_cell_read_u8()
  nvmem: core: Grammar fixes for help text
  nvmem: sc27xx: add sc2730 efuse support
  nvmem: Enforce nvmem stride in the sysfs interface
  MAINTAINERS: Add git tree for NVMEM FRAMEWORK
  nvmem: sprd: Fix return value of sprd_efuse_probe()
  drivers: android: Fix the SPDX comment style
  drivers: android: Fix a variable declaration coding style issue
  drivers: android: Remove braces for a single statement if-else block
  drivers: android: Remove the use of else after return
  drivers: android: Fix a variable declaration coding style issue
  ...

misc: Replace HTTP links with HTTPS ones

2020-07-23T07:44:15+00:00

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
	  If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
            If both the HTTP and HTTPS versions
            return 200 OK and serve the same content:
              Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov 
Link: https://lore.kernel.org/r/20200713164024.35988-1-grandmaster@al2klimov.de
Signed-off-by: Greg Kroah-Hartman

docs: misc-devices/pci-endpoint-test.txt: convert to ReST

2020-06-19T20:05:49+00:00

- use title markups;
- mark literal blocks.

Signed-off-by: Mauro Carvalho Chehab 
Link: https://lore.kernel.org/r/1b1f4e5e57fd2065828cecc9d07afbd247349e94.1592203650.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet

treewide: replace '---help---' in Kconfig files with 'help'

2020-06-13T16:57:21+00:00

Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada

bus: vexpress-config: Merge vexpress-syscfg into vexpress-config

2020-05-13T17:42:46+00:00

The only thing that vexpress-syscfg does is provide a regmap to
vexpress-config bus child devices. There's little reason to have 2
components for this. The current structure with initcall ordering
requirements makes turning these components into modules more difficult.

So let's start to simplify things and merge vexpress-syscfg into
vexpress-config. There's no functional change in this commit and it's
still separate components until subsequent commits.

Cc: Lorenzo Pieralisi 
Cc: Linus Walleij 
Cc: Arnd Bergmann 
Reviewed-by: Sudeep Holla 
Acked-by: Greg Kroah-Hartman 
Acked-by: Liviu Dudau 
Signed-off-by: Rob Herring