Pull powerpc updates from Michael Ellerman:
 "Highlights:

   - Enable support for memory protection keys aka "pkeys" on Power7/8/9
     when using the hash table MMU.

   - Extend our interrupt soft masking to support masking PMU interrupts
     as well as "normal" interrupts, and then use that to implement
     local_t for a ~4x speedup vs the current atomics-based
     implementation.

   - A new driver "ocxl" for "Open Coherent Accelerator Processor
     Interface (OpenCAPI)" devices.

   - Support for new device tree properties on PowerVM to describe
     hotpluggable memory and devices.

   - Add support for CLOCK_{REALTIME/MONOTONIC}_COARSE to the 64-bit
     VDSO.

   - Freescale updates from Scott: fixes for CPM GPIO and an FSL PCI
     erratum workaround, plus a minor cleanup patch.

  As well as quite a lot of other changes all over the place, and small
  fixes and cleanups as always.

  Thanks to: Alan Modra, Alastair D'Silva, Alexey Kardashevskiy,
  Alistair Popple, Andreas Schwab, Andrew Donnellan, Aneesh Kumar K.V,
  Anju T Sudhakar, Anshuman Khandual, Anton Blanchard, Arnd Bergmann,
  Balbir Singh, Benjamin Herrenschmidt, Bhaktipriya Shridhar, Bryant G.
  Ly, Cédric Le Goater, Christophe Leroy, Christophe Lombard, Cyril Bur,
  David Gibson, Desnes A. Nunes do Rosario, Dmitry Torokhov, Frederic
  Barrat, Geert Uytterhoeven, Guilherme G. Piccoli, Gustavo A. R. Silva,
  Gustavo Romero, Ivan Mikhaylov, Joakim Tjernlund, Joe Perches, Josh
  Poimboeuf, Juan J. Alvarez, Julia Cartwright, Kamalesh Babulal,
  Madhavan Srinivasan, Mahesh Salgaonkar, Mathieu Malaterre, Michael
  Bringmann, Michael Hanselmann, Michael Neuling, Nathan Fontenot,
  Naveen N. Rao, Nicholas Piggin, Paul Mackerras, Philippe Bergheaud,
  Ram Pai, Russell Currey, Santosh Sivaraj, Scott Wood, Seth Forshee,
  Simon Guo, Stewart Smith, Sukadev Bhattiprolu, Thiago Jung Bauermann,
  Vaibhav Jain, Vasyl Gomonovych"

* tag 'powerpc-4.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (199 commits)
  powerpc/mm/radix: Fix build error when RADIX_MMU=n
  macintosh/ams-input: Use true and false for boolean values
  macintosh: change some data types from int to bool
  powerpc/watchdog: Print the NIP in soft_nmi_interrupt()
  powerpc/watchdog: regs can't be null in soft_nmi_interrupt()
  powerpc/watchdog: Tweak watchdog printks
  powerpc/cell: Remove axonram driver
  rtc-opal: Fix handling of firmware error codes, prevent busy loops
  powerpc/mpc52xx_gpt: make use of raw_spinlock variants
  macintosh/adb: Properly mark continued kernel messages
  powerpc/pseries: Fix cpu hotplug crash with memoryless nodes
  powerpc/numa: Ensure nodes initialized for hotplug
  powerpc/numa: Use ibm,max-associativity-domains to discover possible nodes
  powerpc/kernel: Block interrupts when updating TIDR
  powerpc/powernv/idoa: Remove unnecessary pcidev from pci_dn
  powerpc/mm/nohash: do not flush the entire mm when range is a single page
  powerpc/pseries: Add Initialization of VF Bars
  powerpc/pseries/pci: Associate PEs to VFs in configure SR-IOV
  powerpc/eeh: Add EEH notify resume sysfs
  powerpc/eeh: Add EEH operations to notify resume
  ...

OCXL_BASE triggers the platform support needed by the driver.

Signed-off-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Because Realtek card reader drivers are pcie and usb drivers,
and they bridge mmc subsystem and memstick subsystem, they are
not mfd drivers. Greg and Lee Jones had a discussion about
where to put the drivers, the result is that misc is a good
place for them, so I move all files to misc. If I don't move
them to a right place, I can't add any patch for this driver.

Signed-off-by: Rui Feng <rui_feng@realsil.com.cn>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Perry Yuan <perry_yuan@dell.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>

Pull staging and IIO updates from Greg KH:
 "Here is the "big" staging and IIO driver update for 4.15-rc1.

  Lots and lots of little changes, almost all minor code cleanups as the
  Outreachy application process happened during this development cycle.
  Also happened was a lot of IIO driver activity, and the typec USB code
  moving out of staging to drivers/usb (same commits are in the USB tree
  on a persistent branch to not cause merge issues.)

  Overall, it's a wash, I think we added a few hundred more lines than
  removed, but really only a few thousand were modified at all.

  All of these have been in linux-next for a while. There might be a
  merge issue with Al's vfs tree in the pi433 driver (take his changes,
  they are always better), and the media tree with some of the odd
  atomisp cleanups (take the media tree's version)"

* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
  staging: lustre: add SPDX identifiers to all lustre files
  staging: greybus: Remove redundant license text
  staging: greybus: add SPDX identifiers to all greybus driver files
  staging: ccree: simplify ioread/iowrite
  staging: ccree: simplify registers access
  staging: ccree: simplify error handling logic
  staging: ccree: remove dead code
  staging: ccree: handle limiting of DMA masks
  staging: ccree: copy IV to DMAable memory
  staging: fbtft: remove redundant initialization of buf
  staging: sm750fb: Fix parameter mistake in poke32
  staging: wilc1000: Fix bssid buffer offset in Txq
  staging: fbtft: fb_ssd1331: fix mirrored display
  staging: android: Fix checkpatch.pl error
  staging: greybus: loopback: convert loopback to use generic async operations
  staging: greybus: operation: add private data with get/set accessors
  staging: greybus: loopback: Fix iteration count on async path
  staging: greybus: loopback: Hold per-connection mutex across operations
  staging: greybus/loopback: use ktime_get() for time intervals
  staging: fsl-dpaa2/eth: Extra headroom in RX buffers
  ...

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Jonathan writes:

Round one of new device support, features and cleanup for IIO in the 4.15 cycle.

Note there is a misc driver drop in here given we have support
in IIO and the feeling is no one will care.

A large part of this series is a boiler plate removal series avoiding
the need to explicitly provide THIS_MODULE in various locations.
It's very dull but touches all drivers.

New device support
* ad5446
  - add ids to support compatible parts DAC081S101, DAC101S101,
    DAC121S101.
  - add the dac7512 id and drop the misc driver as feeling is no
    one is using it (was introduced for a board that is long obsolete)
* mt6577
  - add bindings for mt2712 which is fully compatible with other
    supported parts.
* st_pressure
  - add support for LPS33HW and LPS35HW with bindings (ids mostly).

New features
* ccs811
  - Add support for the data ready trigger.
* mma8452
  - remove artifical restriction on supporting multiple event types
    at the same time.
* tcs3472
  - support out of threshold events

Core and tree wide cleanup
* Use macro magic to remove the need to provide THIS_MODULE as part of
  struct iio_info or struct iio_trigger_ops.  This is similar to
  work done in a number of other subsystems (e.g. i2c, spi).

  All drivers are fixed and then the fields in these structures are
  removed.

  This will cause build failures for out of tree drivers and any
  new drivers that cross with this work going into the kernel.

  Note mostly done with a coccinelle patch, included in the series
  on the mailing list but not merged as the fields no longer exist
  in the structures so the any hold outs will cause a build failure.

Cleanups
* ads1015
  - avoid writing config register when it doesn't change.
  - add 10% to conversion wait time as it seems it is sometimes
    a little small.
* ade7753
  - replace use of core mlock with a local lock.  This is part of a
    long term effort to make the use of mlock opaque and single
    purpose.
* ade7759
  - expand the use of buf_lock to cover previous mlock cases.  This
    is a slightly nicer solution to the same issue as in ade7753.
* cros_ec
  - drop an unused variable
* inv_mpu6050
  - add a missing break in a switch for consistency - not actual
    bug,
  - make some local arrays static to save on object code size.
* max5481
  - drop manual setting of the spi module owner as handled by the
    spi core.
* max5487
  - drop manual setting of the spi module owner as handled by the
    spi core.
* max9611
  - drop explicit setting of the i2c module owner as handled by
    the i2c core.
* mcp320x
  - speed up reads on single channel devices,
  - drop unused of_device_id data elements,
  - document the struct mcp320x,
  - improve binding docs to reflect restrictions on spi setup and
    to make it explicit that the reference regulator is needed.
* mma8452
  - symbolic to octal permissions,
  - unsigned to unsigned int.
* st_lsm6dsx
  - avoid setting odr values multiple times,
  - drop config of LIR as it is only ever set to the existing
    defaults,
  - drop rounding configuration as it only ever matches the defaults.
* ti-ads8688
  - drop manual setting of the spi module owner as handled by the
    spi core.
* tsl2x7x
  - constify the i2c_device_id,
  - cleanup limit checks to avoid static checker warnings (and generally
    have nicer code).

The Texas Instruments DAC7512 has the exact same pinout, programming
interface and power-down modes as the Texas Instruments DAC121S101 and
Analog Devices AD5320, which are already supported by the IIO driver
ad5446.c.  Remove the duplicate misc driver.

This requires user space to migrate to the standardized IIO sysfs ABI.
(In other words, it needs to change a filename.)

The IIO driver supports the chip's features more fully, e.g. the ability
to power down the output or choose one of the available powerdown modes.

There is an oddity with the misc driver in that it initializes the SPI
slave to SPI_MODE_0, in contradiction to the datasheet which specifies
that data is latched in on the falling edge, implying that SPI_MODE_1
or SPI_MODE_2 must be used.  Another oddity is that Kconfig and the
MODULE_DESCRIPTION() claim the chip has 16-bit resolution although it
actually has 12-bit.

Datasheets:
http://www.ti.com/lit/ds/symlink/dac7512.pdf
http://www.ti.com/lit/ds/symlink/dac121s101.pdf
http://www.analog.com/media/en/technical-documentation/data-sheets/AD5320.pdf

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Daniel Mack <daniel@zonque.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The existing REFCOUNT_* LKDTM tests were designed only for testing a narrow
portion of CONFIG_REFCOUNT_FULL. This moves the tests to their own file and
expands their testing to poke each boundary condition.

Since the protections (CONFIG_REFCOUNT_FULL and x86-fast) use different
saturation values and reach-zero behavior, those have to be build-time
set so the tests can actually validate things are happening at the
right places.

Notably, the x86-fast protection will fail REFCOUNT_INC_ZERO and
REFCOUNT_ADD_ZERO since those conditions are not checked (only overflow
is critical to protecting refcount_t). CONFIG_REFCOUNT_FULL will warn for
each REFCOUNT_*_NEGATIVE test since it provides zero-pinning behaviors
(which allows it to pass REFCOUNT_INC_ZERO and REFCOUNT_ADD_ZERO).

Signed-off-by: Kees Cook <keescook@chromium.org>

This driver enables the LPC snoop hardware on the ASPEED BMC
which generates an interrupt upon every write to an I/O port
by the host.

This is typically used to monitor BIOS boot progress by listening
to well-known debug port 80h.

The functionality in this commit just saves all snooped values
to a circular 2K buffer in the kernel, subsequent commits can
act on the values to do things with them.

Signed-off-by: Robert Lippert <rlippert@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull PCI updates from Bjorn Helgaas:

 - add framework for supporting PCIe devices in Endpoint mode (Kishon
   Vijay Abraham I)

 - use non-postable PCI config space mappings when possible (Lorenzo
   Pieralisi)

 - clean up and unify mmap of PCI BARs (David Woodhouse)

 - export and unify Function Level Reset support (Christoph Hellwig)

 - avoid FLR for Intel 82579 NICs (Sasha Neftin)

 - add pci_request_irq() and pci_free_irq() helpers (Christoph Hellwig)

 - short-circuit config access failures for disconnected devices (Keith
   Busch)

 - remove D3 sleep delay when possible (Adrian Hunter)

 - freeze PME scan before suspending devices (Lukas Wunner)

 - stop disabling MSI/MSI-X in pci_device_shutdown() (Prarit Bhargava)

 - disable boot interrupt quirk for ASUS M2N-LR (Stefan Assmann)

 - add arch-specific alignment control to improve device passthrough by
   avoiding multiple BARs in a page (Yongji Xie)

 - add sysfs sriov_drivers_autoprobe to control VF driver binding
   (Bodong Wang)

 - allow slots below PCI-to-PCIe "reverse bridges" (Bjorn Helgaas)

 - fix crashes when unbinding host controllers that don't support
   removal (Brian Norris)

 - add driver for MicroSemi Switchtec management interface (Logan
   Gunthorpe)

 - add driver for Faraday Technology FTPCI100 host bridge (Linus
   Walleij)

 - add i.MX7D support (Andrey Smirnov)

 - use generic MSI support for Aardvark (Thomas Petazzoni)

 - make Rockchip driver modular (Brian Norris)

 - advertise 128-byte Read Completion Boundary support for Rockchip
   (Shawn Lin)

 - advertise PCI_EXP_LNKSTA_SLC for Rockchip root port (Shawn Lin)

 - convert atomic_t to refcount_t in HV driver (Elena Reshetova)

 - add CPU IRQ affinity in HV driver (K. Y. Srinivasan)

 - fix PCI bus removal in HV driver (Long Li)

 - add support for ThunderX2 DMA alias topology (Jayachandran C)

 - add ThunderX pass2.x 2nd node MCFG quirk (Tomasz Nowicki)

 - add ITE 8893 bridge DMA alias quirk (Jarod Wilson)

 - restrict Cavium ACS quirk only to CN81xx/CN83xx/CN88xx devices
   (Manish Jaggi)

* tag 'pci-v4.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (146 commits)
  PCI: Don't allow unbinding host controllers that aren't prepared
  ARM: DRA7: clockdomain: Change the CLKTRCTRL of CM_PCIE_CLKSTCTRL to SW_WKUP
  MAINTAINERS: Add PCI Endpoint maintainer
  Documentation: PCI: Add userguide for PCI endpoint test function
  tools: PCI: Add sample test script to invoke pcitest
  tools: PCI: Add a userspace tool to test PCI endpoint
  Documentation: misc-devices: Add Documentation for pci-endpoint-test driver
  misc: Add host side PCI driver for PCI test function device
  PCI: Add device IDs for DRA74x and DRA72x
  dt-bindings: PCI: dra7xx: Add DT bindings to enable unaligned access
  PCI: dwc: dra7xx: Workaround for errata id i870
  dt-bindings: PCI: dra7xx: Add DT bindings for PCI dra7xx EP mode
  PCI: dwc: dra7xx: Add EP mode support
  PCI: dwc: dra7xx: Facilitate wrapper and MSI interrupts to be enabled independently
  dt-bindings: PCI: Add DT bindings for PCI designware EP mode
  PCI: dwc: designware: Add EP mode support
  Documentation: PCI: Add binding documentation for pci-test endpoint function
  ixgbe: Use pcie_flr() instead of duplicating it
  IB/hfi1: Use pcie_flr() instead of duplicating it
  PCI: imx6: Fix spelling mistake: "contol" -> "control"
  ...