linux-toradex.git/drivers/misc/Makefile, branch v5.11-rc5

misc: mic: remove the MIC drivers

2020-10-28T18:12:03+00:00

This patch removes the MIC drivers from the kernel tree
since the corresponding devices have been discontinued.

Removing the dma and char-misc changes in one patch and
merging via the char-misc tree is best to avoid any
potential build breakage.

Cc: Nikhil Rao 
Reviewed-by: Ashutosh Dixit 
Signed-off-by: Sudeep Dutt 
Acked-By: Vinod Koul 
Reviewed-by: Sherry Sun 
Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com
Signed-off-by: Greg Kroah-Hartman

misc: hisi_hikey_usb: Driver to support onboard USB gpio hub on Hikey960

2020-09-10T16:56:38+00:00

The HiKey960 has a fairly complex USB configuration due to it
needing to support a USB-C port for host/device mode and multiple
USB-A ports in host mode, all using a single USB controller.

See schematics here:
  https://github.com/96boards/documentation/raw/master/consumer/hikey/hikey960/hardware-docs/HiKey960_Schematics.pdf

This driver acts as a usb-role-switch intermediary, intercepting
the role switch notifications from the tcpm code, and passing
them on to the dwc3 core.

In doing so, it also controls the onboard hub and power gpios in
order to properly route the data lines between the USB-C port
and the onboard hub to the USB-A ports.

Signed-off-by: Yu Chen 
[jstultz: Major rework to make the driver a usb-role-switch
          intermediary]
Signed-off-by: John Stultz 
Signed-off-by: Mauro Carvalho Chehab 
Link: https://lore.kernel.org/r/c263f72e1d803c18c45a69ce2c333e79a7ed89ff.1599717402.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman

bus: vexpress-config: Merge vexpress-syscfg into vexpress-config

2020-05-13T17:42:46+00:00

The only thing that vexpress-syscfg does is provide a regmap to
vexpress-config bus child devices. There's little reason to have 2
components for this. The current structure with initcall ordering
requirements makes turning these components into modules more difficult.

So let's start to simplify things and merge vexpress-syscfg into
vexpress-config. There's no functional change in this commit and it's
still separate components until subsequent commits.

Cc: Lorenzo Pieralisi 
Cc: Linus Walleij 
Cc: Arnd Bergmann 
Reviewed-by: Sudeep Holla 
Acked-by: Greg Kroah-Hartman 
Acked-by: Liviu Dudau 
Signed-off-by: Rob Herring

uacce: add uacce driver

2020-02-22T01:25:42+00:00

Uacce (Unified/User-space-access-intended Accelerator Framework) targets to
provide Shared Virtual Addressing (SVA) between accelerators and processes.
So accelerator can access any data structure of the main cpu.
This differs from the data sharing between cpu and io device, which share
only data content rather than address.
Since unified address, hardware and user space of process can share the
same virtual address in the communication.

Uacce create a chrdev for every registration, the queue is allocated to
the process when the chrdev is opened. Then the process can access the
hardware resource by interact with the queue file. By mmap the queue
file space to user space, the process can directly put requests to the
hardware without syscall to the kernel space.

The IOMMU core only tracks mm<->device bonds at the moment, because it
only needs to handle IOTLB invalidation and PASID table entries. However
uacce needs a finer granularity since multiple queues from the same
device can be bound to an mm. When the mm exits, all bound queues must
be stopped so that the IOMMU can safely clear the PASID table entry and
reallocate the PASID.

An intermediate struct uacce_mm links uacce devices and queues.
Note that an mm may be bound to multiple devices but an uacce_mm
structure only ever belongs to a single device, because we don't need
anything more complex (if multiple devices are bound to one mm, then
we'll create one uacce_mm for each bond).

        uacce_device --+-- uacce_mm --+-- uacce_queue
                       |              '-- uacce_queue
                       |
                       '-- uacce_mm --+-- uacce_queue
                                      +-- uacce_queue
                                      '-- uacce_queue

Reviewed-by: Greg Kroah-Hartman 
Reviewed-by: Jonathan Cameron 
Signed-off-by: Kenneth Lee 
Signed-off-by: Zaibo Xu 
Signed-off-by: Zhou Wang 
Signed-off-by: Jean-Philippe Brucker 
Signed-off-by: Zhangfei Gao 
Signed-off-by: Herbert Xu

Merge tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2019-09-18T18:14:31+00:00

Pull char/misc driver updates from Greg KH:
 "Here is the big char/misc driver pull request for 5.4-rc1.

  As has been happening in previous releases, more and more individual
  driver subsystem trees are ending up in here. Now if that is good or
  bad I can't tell, but hopefully it makes your life easier as it's more
  of an aggregation of trees together to one merge point for you.

  Anyway, lots of stuff in here:
     - habanalabs driver updates
     - thunderbolt driver updates
     - misc driver updates
     - coresight and intel_th hwtracing driver updates
     - fpga driver updates
     - extcon driver updates
     - some dma driver updates
     - char driver updates
     - android binder driver updates
     - nvmem driver updates
     - phy driver updates
     - parport driver fixes
     - pcmcia driver fix
     - uio driver updates
     - w1 driver updates
     - configfs fixes
     - other assorted driver updates

  All of these have been in linux-next for a long time with no reported
  issues"

* tag 'char-misc-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (200 commits)
  misc: mic: Use PTR_ERR_OR_ZERO rather than its implementation
  habanalabs: correctly cast variable to __le32
  habanalabs: show correct id in error print
  habanalabs: stop using the acronym KMD
  habanalabs: display card name as sensors header
  habanalabs: add uapi to retrieve aggregate H/W events
  habanalabs: add uapi to retrieve device utilization
  habanalabs: Make the Coresight timestamp perpetual
  habanalabs: explicitly set the queue-id enumerated numbers
  habanalabs: print to kernel log when reset is finished
  habanalabs: replace __le32_to_cpu with le32_to_cpu
  habanalabs: replace __cpu_to_le32/64 with cpu_to_le32/64
  habanalabs: Handle HW_IP_INFO if device disabled or in reset
  habanalabs: Expose devices after initialization is done
  habanalabs: improve security in Debug IOCTL
  habanalabs: use default structure for user input in Debug IOCTL
  habanalabs: Add descriptive name to PSOC app status register
  habanalabs: Add descriptive names to PSOC scratch-pad registers
  habanalabs: create two char devices per ASIC
  habanalabs: change device_setup_cdev() to be more generic
  ...

drivers: remove the SGI SN2 IOC4 base support

2019-08-16T18:33:57+00:00

The IOC4 is a multi-function chip seen on SGI SN2 and some SGI MIPS
systems.  This removes the base driver, which while not having an SN2
Kconfig dependency was only for sub-drivers that had one.

Signed-off-by: Christoph Hellwig 
Link: https://lkml.kernel.org/r/20190813072514.23299-15-hch@lst.de
Signed-off-by: Tony Luck

misc: Remove spear13xx pcie gadget driver

2019-08-05T16:04:15+00:00

This driver has been marked broken since 2013, see commit 98097858ccf3
("misc: mark spear13xx-pcie-gadget as broken"). Let's remove this file
now that it's been more than 5 years of existing in a broken state.

Cc: Arnd Bergmann 
Signed-off-by: Stephen Boyd 
Link: https://lore.kernel.org/r/5d41a2b7.1c69fb81.c8d56.edb6@mx.google.com
Signed-off-by: Greg Kroah-Hartman

misc: fsa9480: Delete this driver

2019-07-03T07:51:08+00:00

The FSA9480 has a new driver more appropriately located
in the drivers/extcon subsystem. It is also more complete
and includes device tree support. Delete the old misc
driver.

Cc: Arnd Bergmann 
Signed-off-by: Linus Walleij 
Reviewed-by: Chanwoo Choi 
Reviewed-by: Pawe Chmiel 
Link: https://lore.kernel.org/r/20190630140302.16245-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman

misc: xilinx-sdfec: add core driver

2019-06-21T14:12:05+00:00

Implement a platform driver that matches with xlnx,
sd-fec-1.1 device tree node and registers as a character
device, including:
- SD-FEC driver binds to sdfec DT node.
- creates and initialise an initial driver dev structure.
- add the driver in Linux build and Kconfig.

Tested-by: Dragan Cvetic 
Signed-off-by: Derek Kiernan 
Signed-off-by: Dragan Cvetic 
Signed-off-by: Greg Kroah-Hartman

soc: add aspeed folder and misc drivers

2019-04-29T16:36:34+00:00

Create a SoC folder for the ASPEED parts and place the misc drivers
currently present into this folder.  These drivers are not generic part
drivers, but rather only apply to the ASPEED SoCs.

Signed-off-by: Patrick Venture 
Acked-by: Arnd Bergmann 
Signed-off-by: Olof Johansson