A dummy zero bit is sent preceding the data during a read transfer by the
Microchip 93LC46B eeprom (section 2.7 of[1]). This results in right shift
of data during a read. In order to ignore this bit a quirk can be added to
send an extra zero bit after the read address.

Add a quirk to ignore the zero bit sent before data by adding a zero bit
after the read address.

[1] - https://www.mouser.com/datasheet/2/268/20001749K-277859.pdf

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210105105817.17644-3-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Module alias "spi:93xx46" is used by non device tree users like
drivers/misc/eeprom/digsy_mtc_eeprom.c  and removing it will
break support for them.

Fix this by adding back the module alias "spi:93xx46".

Fixes: 13613a2246bf ("misc: eeprom_93xx46: Fix module alias to enable module autoprobe")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210113051253.15061-1-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add module alias to enable autoprobe for microchip 93LC46B eeprom by using
/sys/class/.../spi1.0/modalias content.

Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210107163957.28664-3-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix module autoprobe by correcting module alias to match the string from
/sys/class/.../spi1.0/modalias content.

Fixes: 06b4501e88ad ("misc/eeprom: add driver for microwire 93xx46 EEPROMs")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Link: https://lore.kernel.org/r/20210107163957.28664-2-a-govindraju@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull char / misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 5.11-rc1.

  Continuing the tradition of previous -rc1 pulls, there seems to be
  more and more tiny driver subsystems flowing through this tree.

  Lots of different things, all of which have been in linux-next for a
  while with no reported issues:

   - extcon driver updates

   - habannalab driver updates

   - mei driver updates

   - uio driver updates

   - binder fixes and features added

   - soundwire driver updates

   - mhi bus driver updates

   - phy driver updates

   - coresight driver updates

   - fpga driver updates

   - speakup driver updates

   - slimbus driver updates

   - various small char and misc driver updates"

* tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits)
  extcon: max77693: Fix modalias string
  extcon: fsa9480: Support TI TSU6111 variant
  extcon: fsa9480: Rewrite bindings in YAML and extend
  dt-bindings: extcon: add binding for TUSB320
  extcon: Add driver for TI TUSB320
  slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()
  siox: Make remove callback return void
  siox: Use bus_type functions for probe, remove and shutdown
  spmi: Add driver shutdown support
  spmi: fix some coding style issues at the spmi core
  spmi: get rid of a warning when built with W=1
  uio: uio_hv_generic: use devm_kzalloc() for private data alloc
  uio: uio_fsl_elbc_gpcm: use device-managed allocators
  uio: uio_aec: use devm_kzalloc() for uio_info object
  uio: uio_cif: use devm_kzalloc() for uio_info object
  uio: uio_netx: use devm_kzalloc() for or uio_info object
  uio: uio_mf624: use devm_kzalloc() for uio_info object
  uio: uio_sercos3: use device-managed functions for simple allocs
  uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers
  uio: uio_dmem_genirq: convert simple allocations to device-managed
  ...

When the "label" property is set on the AT24 EEPROM the NVMEM devid is
set to NVMEM_DEVID_NONE, but it is not effective since there is a
leftover line setting it back to NVMEM_DEVID_AUTO a few lines after.

Fixes: 61f764c307f6 ("eeprom: at24: Support custom device names for AT24 EEPROMs")
Signed-off-by: Diego Santa Cruz <Diego.SantaCruz@spinetix.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>

To save the interested reader some time, add examples of AT25 part
numbers that correspond to EEPROMs rather than flashes.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20201107133337.1066271-1-j.neuschaefer@gmx.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Pull i2c updates from Wolfram Sang:

 - if a host can be a client, too, the I2C core can now use it to
   emulate SMBus HostNotify support (STM32 and R-Car added this so far)

 - also for client mode, a testunit has been added. It can create rare
   situations on the bus, so host controllers can be tested

 - a binding has been added to mark the bus as "single-master". This
   allows for better timeout detections

 - new driver for Mellanox Bluefield

 - massive refactoring of the Tegra driver

 - EEPROMs recognized by the at24 driver can now have custom names

 - rest is driver updates

* 'i2c/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (80 commits)
  Documentation: i2c: add testunit docs to index
  i2c: tegra: Improve driver module description
  i2c: tegra: Clean up whitespaces, newlines and indentation
  i2c: tegra: Clean up and improve comments
  i2c: tegra: Clean up printk messages
  i2c: tegra: Clean up variable names
  i2c: tegra: Improve formatting of variables
  i2c: tegra: Check errors for both positive and negative values
  i2c: tegra: Factor out hardware initialization into separate function
  i2c: tegra: Factor out register polling into separate function
  i2c: tegra: Factor out packet header setup from tegra_i2c_xfer_msg()
  i2c: tegra: Factor out error recovery from tegra_i2c_xfer_msg()
  i2c: tegra: Rename wait/poll functions
  i2c: tegra: Remove "dma" variable from tegra_i2c_xfer_msg()
  i2c: tegra: Remove redundant check in tegra_i2c_issue_bus_clear()
  i2c: tegra: Remove likely/unlikely from the code
  i2c: tegra: Remove outdated barrier()
  i2c: tegra: Clean up variable types
  i2c: tegra: Reorder location of functions in the code
  i2c: tegra: Clean up probe function
  ...

Use the module_i2c_driver() macro to make the code smaller
and a bit simpler.

Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20200918030225.3902750-1-liushixin2@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

at24 updates for v5.10

- add support for masking sensitive data in VAIO EEPROMs
- set the nvmem TYPE to NVMEM_TYPE_EEPROM
- add support for the new 'label' property
- set the nvmem ID to NVMEM_DEVID_AUTO by default (for backward
  compatibility) or to NVMEM_DEVID_NONE if label is defined