linux-toradex.git/drivers/misc/mei, branch v4.15-rc2 Linux kernel for Apalis and Colibri modules Merge tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc 2017-11-16T17:10:59+00:00 Linus Torvalds torvalds@linux-foundation.org 2017-11-16T17:10:59+00:00 2bf16b7a73caf3435f782e4170cfe563675e10f9 Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ... 
Pull char/misc updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem patches
  for 4.15-rc1.

  There are small changes all over here, hyperv driver updates, pcmcia
  driver updates, w1 driver updats, vme driver updates, nvmem driver
  updates, and lots of other little one-off driver updates as well. The
  shortlog has the full details.

  All of these have been in linux-next for quite a while with no
  reported issues"

* tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits)
  VME: Return -EBUSY when DMA list in use
  w1: keep balance of mutex locks and refcnts
  MAINTAINERS: Update VME subsystem tree.
  nvmem: sunxi-sid: add support for A64/H5's SID controller
  nvmem: imx-ocotp: Update module description
  nvmem: imx-ocotp: Enable i.MX7D OTP write support
  nvmem: imx-ocotp: Add i.MX7D timing write clock setup support
  nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function
  nvmem: imx-ocotp: Add support for banked OTP addressing
  nvmem: imx-ocotp: Pass parameters via a struct
  nvmem: imx-ocotp: Restrict OTP write to IMX6 processors
  nvmem: uniphier: add UniPhier eFuse driver
  dt-bindings: nvmem: add description for UniPhier eFuse
  nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset
  nvmem: qfprom: fix different address space warnings of sparse
  nvmem: mtk-efuse: fix different address space warnings of sparse
  nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it
  nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it
  thunderbolt: tb: fix use after free in tb_activate_pcie_devices
  MAINTAINERS: Add git tree for Thunderbolt development
  ...
Merge branch 'pm-core' 2017-11-13T00:41:26+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2017-11-13T00:41:26+00:00 1efef68262dc567f0c09da9d11924e8287cd3a8b * pm-core: ACPI / PM: Take SMART_SUSPEND driver flag into account PCI / PM: Take SMART_SUSPEND driver flag into account PCI / PM: Drop unnecessary invocations of pcibios_pm_ops callbacks PM / core: Add SMART_SUSPEND driver flag PCI / PM: Use the NEVER_SKIP driver flag PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags PM / core: Convert timers to use timer_setup() PM / core: Fix kerneldoc comments of four functions PM / core: Drop legacy class suspend/resume operations 
* pm-core:
  ACPI / PM: Take SMART_SUSPEND driver flag into account
  PCI / PM: Take SMART_SUSPEND driver flag into account
  PCI / PM: Drop unnecessary invocations of pcibios_pm_ops callbacks
  PM / core: Add SMART_SUSPEND driver flag
  PCI / PM: Use the NEVER_SKIP driver flag
  PM / core: Add NEVER_SKIP and SMART_PREPARE driver flags
  PM / core: Convert timers to use timer_setup()
  PM / core: Fix kerneldoc comments of four functions
  PM / core: Drop legacy class suspend/resume operations
PCI / PM: Use the NEVER_SKIP driver flag 2017-11-06T12:56:49+00:00 Rafael J. Wysocki rafael.j.wysocki@intel.com 2017-10-25T12:16:46+00:00 c2eac4d3a115e2f511844e7bcf73f4e877fbf5da Replace the PCI-specific flag PCI_DEV_FLAGS_NEEDS_RESUME with the PM core's DPM_FLAG_NEVER_SKIP one everywhere and drop it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> 
Replace the PCI-specific flag PCI_DEV_FLAGS_NEEDS_RESUME with the
PM core's DPM_FLAG_NEVER_SKIP one everywhere and drop it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02T10:10:55+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-11-01T14:07:57+00:00 b24413180f5600bcb3bb70fbed5cf186b60864bd Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tracing, mei: Remove unused trace event mei_pci_cfg_write 2017-10-20T13:17:44+00:00 Steven Rostedt (VMware) rostedt@goodmis.org 2017-10-13T13:58:11+00:00 421eb12ead322d66b469b8bf658eca2213f409f5 Commit a96c548291 ("mei: trace pci configuration space io") added the trace event mei_pci_cfg_write but never used it. As trace events that are defined take up space for data structures and functions created for them, it is a waste of memory to have one defined but not used. Remove this trace event. Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Commit a96c548291 ("mei: trace pci configuration space io") added the
trace event mei_pci_cfg_write but never used it. As trace events that
are defined take up space for data structures and functions created for
them, it is a waste of memory to have one defined but not used. Remove
this trace event.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei: me: add gemini lake devices id 2017-10-04T09:25:09+00:00 Tomas Winkler tomas.winkler@intel.com 2017-09-24T08:35:34+00:00 688cb67839e852740d22cf763e5eafb27d5a6e53 Add Gemini Lake (GLK) device id. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Add Gemini Lake (GLK) device id.

Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei: always use domain runtime pm callbacks. 2017-10-04T09:25:09+00:00 Alexander Usyskin alexander.usyskin@intel.com 2017-09-26T06:18:27+00:00 b42dc0635bf0a6aa59fe4d7c826796ff659908c7 This patch fixes a regression caused by the new changes in the "run wake" handlers. The mei devices that support D0i3 are no longer receiving an interrupt after entering runtime suspend state and will stall. pci_dev_run_wake function now returns "true" for some devices (including mei) for which it used to return "false", arguably incorrectly as "run wake" used to mean that wakeup signals can be generated for a device in the working state of the system, so it could not be enabled or disabled before too. MEI maps runtime suspend/resume to its own defined power gating (PG) states, (D0i3 or other depending on generation), hence we need to go around the native PCI runtime service which eventually brings the device into D3cold/hot state, but the mei devices cannot wake up from D3 unlike from D0i3/PG state, which keeps irq running. To get around PCI device native runtime pm, MEI uses runtime pm domain handlers which take precedence. Cc: <stable@vger.kernel.org> #4.13+ Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
This patch fixes a regression caused by the new changes
in the "run wake" handlers.

The mei devices that support D0i3 are no longer receiving an interrupt
after entering runtime suspend state and will stall.

pci_dev_run_wake function now returns "true" for some devices
(including mei) for which it used to return "false",
arguably incorrectly as "run wake" used to mean that
wakeup signals can be generated for a device in
the working state of the system, so it could not be enabled
or disabled before too.

MEI maps runtime suspend/resume to its own defined
power gating (PG) states, (D0i3 or other depending on generation),
hence we need to go around the native PCI runtime service which
eventually brings the device into D3cold/hot state,
but the mei devices cannot wake up from D3 unlike from D0i3/PG state,
which keeps irq running.
To get around PCI device native runtime pm,
MEI uses runtime pm domain handlers which take precedence.

Cc: <stable@vger.kernel.org> #4.13+
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei: make device_type const 2017-08-28T09:59:39+00:00 Bhumika Goyal bhumirks@gmail.com 2017-08-19T08:22:16+00:00 b8d01b7fbaa3b9d5887ec6c6fea36fb57bbc4d6b Make this const as it is only stored in the type field of a device structure, which is const. Done using Coccinelle. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
Make this const as it is only stored in the type field of a device
structure, which is const.
Done using Coccinelle.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Merge 4.13-rc5 into char-misc-next 2017-08-14T20:29:31+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2017-08-14T20:29:31+00:00 d985524680b77a1cf90738db9a2d72065a746afa We want the firmware, and other changes, in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
We want the firmware, and other changes, in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mei: exclude device from suspend direct complete optimization 2017-08-10T21:13:18+00:00 Alexander Usyskin alexander.usyskin@intel.com 2017-08-03T14:30:19+00:00 557909e195aea23d9e6b29cef0be3d795f4cf675 MEI device performs link reset during system suspend sequence. The link reset cannot be performed while device is in runtime suspend state. The resume sequence is bypassed with suspend direct complete optimization,so the optimization should be disabled for mei devices. Fixes: [ 192.940537] Restarting tasks ... [ 192.940610] PGI is not set [ 192.940619] ------------[ cut here ]------------ [ 192.940623] WARNING: CPU: 0 me.c:653 mei_me_pg_exit_sync+0x351/0x360 [ 192.940624] Modules linked in: [ 192.940627] CPU: 0 PID: 1661 Comm: kworker/0:3 Not tainted 4.13.0-rc2+ #2 [ 192.940628] Hardware name: Dell Inc. XPS 13 9343/0TM99H, BIOS A11 12/08/2016 [ 192.940630] Workqueue: pm pm_runtime_work <snip> [ 192.940642] Call Trace: [ 192.940646] ? pci_pme_active+0x1de/0x1f0 [ 192.940649] ? pci_restore_standard_config+0x50/0x50 [ 192.940651] ? kfree+0x172/0x190 [ 192.940653] ? kfree+0x172/0x190 [ 192.940655] ? pci_restore_standard_config+0x50/0x50 [ 192.940663] mei_me_pm_runtime_resume+0x3f/0xc0 [ 192.940665] pci_pm_runtime_resume+0x7a/0xa0 [ 192.940667] __rpm_callback+0xb9/0x1e0 [ 192.940668] ? preempt_count_add+0x6d/0xc0 [ 192.940670] rpm_callback+0x24/0x90 [ 192.940672] ? pci_restore_standard_config+0x50/0x50 [ 192.940674] rpm_resume+0x4e8/0x800 [ 192.940676] pm_runtime_work+0x55/0xb0 [ 192.940678] process_one_work+0x184/0x3e0 [ 192.940680] worker_thread+0x4d/0x3a0 [ 192.940681] ? preempt_count_sub+0x9b/0x100 [ 192.940683] kthread+0x122/0x140 [ 192.940684] ? process_one_work+0x3e0/0x3e0 [ 192.940685] ? __kthread_create_on_node+0x1a0/0x1a0 [ 192.940688] ret_from_fork+0x27/0x40 [ 192.940690] Code: 96 3a 9e ff 48 8b 7d 98 e8 cd 21 58 00 83 bb bc 01 00 00 04 0f 85 40 fe ff ff e9 41 fe ff ff 48 c7 c7 5f 04 99 96 e8 93 6b 9f ff <0f> ff e9 5d fd ff ff e8 33 fe 99 ff 0f 1f 00 0f 1f 44 00 00 55 [ 192.940719] ---[ end trace a86955597774ead8 ]--- [ 192.942540] done. Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reported-by: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
MEI device performs link reset during system suspend sequence.
The link reset cannot be performed while device is in
runtime suspend state. The resume sequence is bypassed with
suspend direct complete optimization,so the optimization should be
disabled for mei devices.

Fixes:
 [  192.940537] Restarting tasks ...
 [  192.940610] PGI is not set
 [  192.940619] ------------[ cut here ]------------ [  192.940623]
 WARNING: CPU: 0
 me.c:653 mei_me_pg_exit_sync+0x351/0x360 [  192.940624] Modules
 linked
 in:
 [  192.940627] CPU: 0 PID: 1661 Comm: kworker/0:3 Not tainted
 4.13.0-rc2+
 #2 [  192.940628] Hardware name: Dell Inc. XPS 13 9343/0TM99H, BIOS
 A11
 12/08/2016 [  192.940630] Workqueue: pm pm_runtime_work <snip> [
 192.940642] Call Trace:
 [  192.940646]  ? pci_pme_active+0x1de/0x1f0 [  192.940649]  ?
 pci_restore_standard_config+0x50/0x50
 [  192.940651]  ? kfree+0x172/0x190
 [  192.940653]  ? kfree+0x172/0x190
 [  192.940655]  ? pci_restore_standard_config+0x50/0x50
 [  192.940663]  mei_me_pm_runtime_resume+0x3f/0xc0
 [  192.940665]  pci_pm_runtime_resume+0x7a/0xa0 [  192.940667]
 __rpm_callback+0xb9/0x1e0 [  192.940668]  ?
 preempt_count_add+0x6d/0xc0 [  192.940670]  rpm_callback+0x24/0x90 [
 192.940672]  ? pci_restore_standard_config+0x50/0x50
 [  192.940674]  rpm_resume+0x4e8/0x800 [  192.940676]
 pm_runtime_work+0x55/0xb0 [  192.940678]
 process_one_work+0x184/0x3e0 [  192.940680]
 worker_thread+0x4d/0x3a0 [ 192.940681]  ?
 preempt_count_sub+0x9b/0x100 [  192.940683]
 kthread+0x122/0x140 [  192.940684]  ? process_one_work+0x3e0/0x3e0 [
 192.940685]  ? __kthread_create_on_node+0x1a0/0x1a0
 [  192.940688]  ret_from_fork+0x27/0x40 [  192.940690] Code: 96 3a
 9e ff 48 8b 7d 98 e8 cd 21 58 00 83 bb bc 01 00 00
 04 0f 85 40 fe ff ff e9 41 fe ff ff 48 c7 c7 5f 04 99 96 e8 93 6b 9f
 ff <0f> ff e9 5d fd ff ff e8 33 fe 99 ff 0f 1f 00 0f 1f 44 00 00 55
 [  192.940719] ---[ end trace
 a86955597774ead8 ]--- [  192.942540] done.

Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>