Pull tracing cleanup from Steven Rostedt:
 "Remove second argument of __assign_str()

  The __assign_str() macro logic of the TRACE_EVENT() macro was
  optimized so that it no longer needs the second argument. The
  __assign_str() is always matched with __string() field that takes a
  field name and the source for that field:

    __string(field, source)

  The TRACE_EVENT() macro logic will save off the source value and then
  use that value to copy into the ring buffer via the __assign_str().

  Before commit c1fa617caeb0 ("tracing: Rework __assign_str() and
  __string() to not duplicate getting the string"), the __assign_str()
  needed the second argument which would perform the same logic as the
  __string() source parameter did. Not only would this add overhead, but
  it was error prone as if the __assign_str() source produced something
  different, it may not have allocated enough for the string in the ring
  buffer (as the __string() source was used to determine how much to
  allocate)

  Now that the __assign_str() just uses the same string that was used in
  __string() it no longer needs the source parameter. It can now be
  removed"

* tag 'trace-assign-str-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/treewide: Remove second parameter of __assign_str()

Pull virtio updates from Michael Tsirkin:
 "Several new features here:

   - virtio-net is finally supported in vduse

   - virtio (balloon and mem) interaction with suspend is improved

   - vhost-scsi now handles signals better/faster

  And fixes, cleanups all over the place"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: (48 commits)
  virtio-pci: Check if is_avq is NULL
  virtio: delete vq in vp_find_vqs_msix() when request_irq() fails
  MAINTAINERS: add Eugenio Pérez as reviewer
  vhost-vdpa: Remove usage of the deprecated ida_simple_xx() API
  vp_vdpa: don't allocate unused msix vectors
  sound: virtio: drop owner assignment
  fuse: virtio: drop owner assignment
  scsi: virtio: drop owner assignment
  rpmsg: virtio: drop owner assignment
  nvdimm: virtio_pmem: drop owner assignment
  wifi: mac80211_hwsim: drop owner assignment
  vsock/virtio: drop owner assignment
  net: 9p: virtio: drop owner assignment
  net: virtio: drop owner assignment
  net: caif: virtio: drop owner assignment
  misc: nsm: drop owner assignment
  iommu: virtio: drop owner assignment
  drm/virtio: drop owner assignment
  gpio: virtio: drop owner assignment
  firmware: arm_scmi: virtio: drop owner assignment
  ...

With the rework of how the __string() handles dynamic strings where it
saves off the source string in field in the helper structure[1], the
assignment of that value to the trace event field is stored in the helper
value and does not need to be passed in again.

This means that with:

  __string(field, mystring)

Which use to be assigned with __assign_str(field, mystring), no longer
needs the second parameter and it is unused. With this, __assign_str()
will now only get a single parameter.

There's over 700 users of __assign_str() and because coccinelle does not
handle the TRACE_EVENT() macro I ended up using the following sed script:

  git grep -l __assign_str | while read a ; do
      sed -e 's/\(__assign_str([^,]*[^ ,]\) *,[^;]*/\1)/' $a > /tmp/test-file;
      mv /tmp/test-file $a;
  done

I then searched for __assign_str() that did not end with ';' as those
were multi line assignments that the sed script above would fail to catch.

Note, the same updates will need to be done for:

  __assign_str_len()
  __assign_rel_str()
  __assign_rel_str_len()

I tested this with both an allmodconfig and an allyesconfig (build only for both).

[1] https://lore.kernel.org/linux-trace-kernel/20240222211442.634192653@goodmis.org/

Link: https://lore.kernel.org/linux-trace-kernel/20240516133454.681ba6a0@rorschach.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Christian König <christian.koenig@amd.com> for the amdgpu parts.
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> #for
Acked-by: Rafael J. Wysocki <rafael@kernel.org> # for thermal
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Darrick J. Wong <djwong@kernel.org>	# xfs
Tested-by: Guenter Roeck <linux@roeck-us.net>

Pull char/misc and other driver subsystem updates from Greg KH:
 "Here is the big set of char/misc and other driver subsystem updates
  for 6.10-rc1. Nothing major here, just lots of new drivers and updates
  for apis and new hardware types. Included in here are:

   - big IIO driver updates with more devices and drivers added

   - fpga driver updates

   - hyper-v driver updates

   - uio_pruss driver removal, no one uses it, other drivers control the
     same hardware now

   - binder minor updates

   - mhi driver updates

   - excon driver updates

   - counter driver updates

   - accessability driver updates

   - coresight driver updates

   - other hwtracing driver updates

   - nvmem driver updates

   - slimbus driver updates

   - spmi driver updates

   - other smaller misc and char driver updates

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (319 commits)
  misc: ntsync: mark driver as "broken" to prevent from building
  spmi: pmic-arb: Add multi bus support
  spmi: pmic-arb: Register controller for bus instead of arbiter
  spmi: pmic-arb: Make core resources acquiring a version operation
  spmi: pmic-arb: Make the APID init a version operation
  spmi: pmic-arb: Fix some compile warnings about members not being described
  dt-bindings: spmi: Deprecate qcom,bus-id
  dt-bindings: spmi: Add X1E80100 SPMI PMIC ARB schema
  spmi: pmic-arb: Replace three IS_ERR() calls by null pointer checks in spmi_pmic_arb_probe()
  spmi: hisi-spmi-controller: Do not override device identifier
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: clean up example
  dt-bindings: spmi: hisilicon,hisi-spmi-controller: fix binding references
  spmi: make spmi_bus_type const
  extcon: adc-jack: Document missing struct members
  extcon: realtek: Remove unused of_gpio.h
  extcon: usbc-cros-ec: Convert to platform remove callback returning void
  extcon: usb-gpio: Convert to platform remove callback returning void
  extcon: max77843: Convert to platform remove callback returning void
  extcon: max3355: Convert to platform remove callback returning void
  extcon: intel-mrfld: Convert to platform remove callback returning void
  ...

Pull MFD updates from Lee Jones:
 "New Device Support:
   - Add support for X-Powers AXP717 PMIC to AXP22X
   - Add support for Rockchip RK816 PMIC to RK8XX
   - Add support for TI TPS65224 PMIC to TPS6594

  New Functionality:
   - Add Power Off functionality to Rohm BD71828
   - Allow I2C SMBus access in Renesas RSMU

  Fix-ups:
   - Device Tree binding adaptions/conversions/creation
   - Shift Intel support over to MSI interrupts
   - Generify adding platform data away from being ACPI specific
   - Use device core supplied attribute to register sysfs entries
   - Replace hand-rolled functionality with generic APIs
   - Utilise centrally provided helpers and macros
   - Clean-up error handling
   - Remove superfluous/duplicated/unused sections
   - Trivial; spelling, whitespace, coding-style adaptions
   - More Maple Tree conversions"

* tag 'mfd-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (44 commits)
  dt-bindings: mfd: Use full path to other schemas
  mfd: rsmu: support I2C SMBus access
  dt-bindings: mfd: Convert lp873x.txt to json-schema
  dt-bindings: mfd: aspeed: Drop 'oneOf' for pinctrl node
  dt-bindings: mfd: allwinner,sun6i-a31-prcm: Use hyphens in node names
  mfd: ssbi: Remove unused field 'slave' from 'struct ssbi'
  mfd: kempld: Remove custom DMI matching code
  mfd: cs42l43: Update patching revision check
  dt-bindings: mfd: qcom: pm8xxx: Add pm8901 compatible
  mfd: timberdale: Remove redundant assignment to variable err
  dt-bindings: mfd: qcom,spmi-pmic: Add pbs to SPMI device types
  dt-bindings: mfd: syscon: Add ti,am62p-cpsw-mac-efuse compatible
  dt-bindings: mfd: qcom,tcsr: Add compatible for SDX75
  mfd: axp20x: Convert to use Maple Tree register cache
  mfd: bd71828: Remove commented code lines
  mfd: intel-m10-bmc: Change staging size to a variable
  dt-bindings: mfd: Add ROHM BD71879
  mfd: Tidy Kconfig dependency's parentheses
  mfd: ocelot-spi: Use spi_sync_transfer()
  dt-bindings: mfd: syscon: Add missing simple syscon compatibles
  ...

virtio core already sets the .owner, so driver does not need to.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Message-Id: <20240331-module-owner-virtio-v2-15-98f04bfaf46a@linaro.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Alexander Graf <graf@amazon.com>

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
     since there's no requirement to describe them in E820 and some
     platforms require ECAM to work (Bjorn Helgaas)

   - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
     Le Moal)

   - Remove last user and pci_enable_device_io() (Heiner Kallweit)

   - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)

   - Skip waiting for devices that have been disconnected while
     suspended (Ilpo Järvinen)

   - Clear Secondary Status errors after enumeration since Master Aborts
     and Unsupported Request errors are an expected part of enumeration
     (Vidya Sagar)

  MSI:

   - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)

  Error handling:

   - Mask Genesys GL975x SD host controller Replay Timer Timeout
     correctable errors caused by a hardware defect; the errors cause
     interrupts that prevent system suspend (Kai-Heng Feng)

   - Fix EDR-related _DSM support, which previously evaluated revision 5
     but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)

  ASPM:

   - Simplify link state definitions and mask calculation (Ilpo
     Järvinen)

  Power management:

   - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
     apparently doesn't know how to put them back in D0 (Mario
     Limonciello)

  CXL:

   - Support resetting CXL devices; special handling required because
     CXL Ports mask Secondary Bus Reset by default (Dave Jiang)

  DOE:

   - Support DOE Discovery Version 2 (Alexey Kardashevskiy)

  Endpoint framework:

   - Set endpoint BAR to be 64-bit if the driver says that's all the
     device supports, in addition to doing so if the size is >2GB
     (Niklas Cassel)

   - Simplify endpoint BAR allocation and setting interfaces (Niklas
     Cassel)

  Cadence PCIe controller driver:

   - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
     Kozlowski)

  Cadence PCIe endpoint driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

  Freescale Layerscape PCIe controller driver:

   - Convert DT binding to YAML (Frank Li)

  MediaTek MT7621 PCIe controller driver:

   - Add DT binding missing 'reg' property for child Root Ports
     (Krzysztof Kozlowski)

   - Fix theoretical string truncation in PHY name (Sergio Paracuellos)

  NVIDIA Tegra194 PCIe controller driver:

   - Return success for endpoint probe instead of falling through to the
     failure path (Vidya Sagar)

  Renesas R-Car PCIe controller driver:

   - Add DT binding missing IOMMU properties (Geert Uytterhoeven)

   - Add DT binding R-Car V4H compatible for host and endpoint mode
     (Yoshihiro Shimoda)

  Rockchip PCIe controller driver:

   - Configure endpoint BARs to be 64-bit based on the BAR type, not the
     BAR value (Niklas Cassel)

   - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)

   - Set the Subsystem Vendor ID, which was previously zero because it
     was masked incorrectly (Rick Wertenbroek)

  Synopsys DesignWare PCIe controller driver:

   - Restructure DBI register access to accommodate devices where this
     requires Refclk to be active (Manivannan Sadhasivam)

   - Remove the deinit() callback, which was only need by the
     pcie-rcar-gen4, and do it directly in that driver (Manivannan
     Sadhasivam)

   - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
     up things like eDMA (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
     to dw_pcie_ep_init() (Manivannan Sadhasivam)

   - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
     reflect the actual functionality (Manivannan Sadhasivam)

   - Call dw_pcie_ep_init_registers() directly from all the glue
     drivers, not just those that require active Refclk from the host
     (Manivannan Sadhasivam)

   - Remove the "core_init_notifier" flag, which was an obscure way for
     glue drivers to indicate that they depend on Refclk from the host
     (Manivannan Sadhasivam)

  TI J721E PCIe driver:

   - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)

   - Add DT binding J722S SoC support (Siddharth Vadapalli)

  TI Keystone PCIe controller driver:

   - Add DT binding missing num-viewport, phys and phy-name properties
     (Jan Kiszka)

  Miscellaneous:

   - Constify and annotate with __ro_after_init (Heiner Kallweit)

   - Convert DT bindings to YAML (Krzysztof Kozlowski)

   - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
     Zhou)"

* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
  PCI: Do not wait for disconnected devices when resuming
  x86/pci: Skip early E820 check for ECAM region
  PCI: Remove unused pci_enable_device_io()
  ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
  PCI: Update pci_find_capability() stub return types
  PCI: Remove PCI_IRQ_LEGACY
  scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
  scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
  dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
  Revert "genirq/msi: Provide constants for PCI/IMS support"
  Revert "x86/apic/msi: Enable PCI/IMS"
  Revert "iommu/vt-d: Enable PCI/IMS"
  Revert "iommu/amd: Enable PCI/IMS"
  Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Avoid 'constexpr', which is a keyword in C23

 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of
   'dt_binding_check'

 - Fix weak references to avoid GOT entries in position-independent code
   generation

 - Convert the last use of 'optional' property in arch/sh/Kconfig

 - Remove support for the 'optional' property in Kconfig

 - Remove support for Clang's ThinLTO caching, which does not work with
   the .incbin directive

 - Change the semantics of $(src) so it always points to the source
   directory, which fixes Makefile inconsistencies between upstream and
   downstream

 - Fix 'make tar-pkg' for RISC-V to produce a consistent package

 - Provide reasonable default coverage for objtool, sanitizers, and
   profilers

 - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.

 - Remove the last use of tristate choice in drivers/rapidio/Kconfig

 - Various cleanups and fixes in Kconfig

* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
  kconfig: use sym_get_choice_menu() in sym_check_prop()
  rapidio: remove choice for enumeration
  kconfig: lxdialog: remove initialization with A_NORMAL
  kconfig: m/nconf: merge two item_add_str() calls
  kconfig: m/nconf: remove dead code to display value of bool choice
  kconfig: m/nconf: remove dead code to display children of choice members
  kconfig: gconf: show checkbox for choice correctly
  kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
  Makefile: remove redundant tool coverage variables
  kbuild: provide reasonable defaults for tool coverage
  modules: Drop the .export_symbol section from the final modules
  kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
  kconfig: use sym_get_choice_menu() in conf_write_defconfig()
  kconfig: add sym_get_choice_menu() helper
  kconfig: turn defaults and additional prompt for choice members into error
  kconfig: turn missing prompt for choice members into error
  kconfig: turn conf_choice() into void function
  kconfig: use linked list in sym_set_changed()
  kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
  kconfig: gconf: remove debug code
  ...

The ntsync code is only partially enabled in the kernel at this point in
time, creating the device node and that's about it.  Don't confuse
systems that expect to see a working ntsync interface by teasing it with
this basic structure at this point in time, so mark the code as "broken"
so that it is not built and enabled just yet.

Once the rest of the code is accepted, this will be reverted so that the
driver can be correctly built and used, but for now, this is the safest
way forward.

Reviewed-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/2024051450-abrasion-swizzle-550b@gregkh
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Now Kbuild provides reasonable defaults for objtool, sanitizers, and
profilers.

Remove redundant variables.

Note:

This commit changes the coverage for some objects:

  - include arch/mips/vdso/vdso-image.o into UBSAN, GCOV, KCOV
  - include arch/sparc/vdso/vdso-image-*.o into UBSAN
  - include arch/sparc/vdso/vma.o into UBSAN
  - include arch/x86/entry/vdso/extable.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
  - include arch/x86/entry/vdso/vdso-image-*.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
  - include arch/x86/entry/vdso/vdso32-setup.o into KASAN, KCSAN, UBSAN, GCOV, KCOV
  - include arch/x86/entry/vdso/vma.o into GCOV, KCOV
  - include arch/x86/um/vdso/vma.o into KASAN, GCOV, KCOV

I believe these are positive effects because all of them are kernel
space objects.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Roberto Sassu <roberto.sassu@huawei.com>