linux-toradex.git/drivers/mmc/core/core.h, branch v3.11.4

mmc: core: Extend shutdown sequence to handle bus operations

2013-06-27T16:39:18+00:00

By adding an optional .shutdown callback to the bus_ops struct we
provide the possibility to let each bus type handle it's shutdown
requirements.

Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball

mmc: core: Validate suspend prerequisites for SDIO at SUSPEND_PREPARE

2013-06-27T16:39:15+00:00

This patch moves the validation for all the suspend prerequisites to be
done at SUSPEND_PREPARE notification. Previously in the SDIO case parts
of the validation was done from mmc_suspend_host.

This patch invents a new pre_suspend bus_ops callback and implements it
for SDIO. Returning an error code from it, will mean at SUSPEND_PREPARE
notification, the card will be removed before proceeding with the
suspend sequence.

Signed-off-by: Ulf Hansson 
Tested-by: Jaehoon Chung 
Signed-off-by: Chris Ball

mmc: core: Restructure and simplify code for mmc sleep|awake

2013-05-26T18:23:17+00:00

The mmc_card_sleep|awake APIs are not being used since the support is
already properly encapsulated within the suspend sequence. Sleep|awake
command is also specific for eMMC.

We remove the sleep|awake bus_ops, the mmc_card_sleep|awake APIs and
move the code into the mmc specific core instead. This also includes
the mmc ops function, mmc_sleepawake. All releated functions have then
become static and we have got far less code to maintain.

Additionally this patch also simplifies the code from mmc_sleepawake,
since it is only used to put the card to sleep and not awake.

Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball

mmc: core: Add bus_ops for runtime pm callbacks

2013-05-26T18:23:15+00:00

SDIO is the only protocol that uses runtime pm for the card device
right now. To provide the option for sd and mmc to use runtime pm as
well the bus_ops callback are extended with two new functions. One for
runtime_suspend and one for runtime_resume.

This patch will also implement the callbacks for SDIO to make sure
existing functionality is maintained. It also prepares to move
away from using the mmc_power_restore_host API, since it is not
needed when using runtime PM.

Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball

mmc: core: Break out start_signal_voltage_switch

2013-02-24T19:37:07+00:00

Allow callers to access the start_signal_voltage_switch host_ops
member without going through any cmd11 logic. This is mostly a
preparation for the following signal voltage switch patch.

Also, reset ios.signal_voltage to its original value if
start_signal_voltage_switch fails.

Signed-off-by: Johan Rudholm 
Acked-by: Ulf Hansson 
Tested-by: Wei WANG 
Signed-off-by: Chris Ball

mmc: core: Add mmc_power_cycle

2013-02-24T19:37:06+00:00

Add mmc_power_cycle which can be used to power cycle for instance
SD-cards.

Signed-off-by: Johan Rudholm 
Acked-by: Ulf Hansson 
Tested-by: Wei WANG 
Signed-off-by: Chris Ball

mmc: fix async request mechanism for sequential read scenarios

2013-02-11T18:28:49+00:00

When current request is running on the bus and if next request fetched
by mmcqd is NULL, mmc context (mmcqd thread) gets blocked until the
current request completes. This means that if new request comes in while
the mmcqd thread is blocked, this new request can not be prepared in
parallel to current ongoing request. This may result in delaying the new
request execution and increase it's latency.

This change allows to wake up the MMC thread on new request arrival.
Now once the MMC thread is woken up, a new request can be fetched and
prepared in parallel to the current running request which means this new
request can be started immediately after the current running request
completes.

With this change read throughput is improved by 16%.

Signed-off-by: Konstantin Dorfman 
Reviewed-by: Seungwon Jeon 
Signed-off-by: Chris Ball

Merge tag 'for-linus' of git://github.com/rustyrussell/linux

2012-01-14T20:32:16+00:00

Autogenerated GPG tag for Rusty D1ADB8F1: 15EE 8D6C AB0E 7F0C F999  BFCB D920 0E6C D1AD B8F1

* tag 'for-linus' of git://github.com/rustyrussell/linux:
  module_param: check that bool parameters really are bool.
  intelfbdrv.c: bailearly is an int module_param
  paride/pcd: fix bool verbose module parameter.
  module_param: make bool parameters really bool (drivers & misc)
  module_param: make bool parameters really bool (arch)
  module_param: make bool parameters really bool (core code)
  kernel/async: remove redundant declaration.
  printk: fix unnecessary module_param_name.
  lirc_parallel: fix module parameter description.
  module_param: avoid bool abuse, add bint for special cases.
  module_param: check type correctness for module_param_array
  modpost: use linker section to generate table.
  modpost: use a table rather than a giant if/else statement.
  modules: sysfs - export: taint, coresize, initsize
  kernel/params: replace DEBUGP with pr_debug
  module: replace DEBUGP with pr_debug
  module: struct module_ref should contains long fields
  module: Fix performance regression on modules with large symbol tables
  module: Add comments describing how the "strmap" logic works

Fix up conflicts in scripts/mod/file2alias.c due to the new linker-
generated table approach to adding __mod_*_device_table entries.  The
ARM sa11x0 mcp bus needed to be converted to that too.

module_param: make bool parameters really bool (drivers & misc)

2012-01-12T23:02:20+00:00

module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Acked-by: Mauro Carvalho Chehab 
Signed-off-by: Rusty Russell

mmc: allow upper layers to know immediately if card has been removed

2012-01-12T04:58:43+00:00

Add a function mmc_detect_card_removed() which upper layers can use to
determine immediately if a card has been removed. This function should
be called after an I/O request fails so that all queued I/O requests
can be errored out immediately instead of waiting for the card device
to be removed.

Signed-off-by: Adrian Hunter 
Acked-by: Sujit Reddy Thumma 
Signed-off-by: Chris Ball