linux-toradex.git/drivers/mmc/host/Makefile, branch v3.4.2

mmc: Support of PCI mode in the dw_mmc driver

2012-03-25T23:33:44+00:00

Support of PCI mode for the dw_mmc driver. This Patch adds the
support for the scenario where the Synopsys Designware IP
is present on the PCI bus. The patch adds the minimal modifications
necessary for the driver to work on PCI platform. Also added separate
files for PCI and PLATFORM modes of operation.

Signed-off-by: Shashidhar Hiremath 
Acked-by: James Hogan 
Signed-off-by: Chris Ball

mmc: sdhci-pci: add platform data

2012-01-12T04:58:47+00:00

Add a means of getting platform data for the SDHCI PCI
devices.  The data is stored against the slot not the
device in order to support multi-slot devices.

The data allows platform-specific setup (such as getting
GPIO numbers from firmware or setting up wl12xx for SDIO)
to be done in platform support files instead of the
sdhci-pci driver.

Signed-off-by: Adrian Hunter 
Signed-off-by: Chris Ball

mmc: tmio: Fix build error without CONFIG_MMC_SDHI

2011-07-20T21:21:00+00:00

Only compile tmio_mmc_dma.o when CONFIG_MMC_SDHI is selected (as y or m).

Signed-off-by: Paul Parsons 
Signed-off-by: Chris Ball

mmc: host: delete obsolete sdhci-pxa.c

2011-07-20T21:20:51+00:00

Delete obsolete sdhci-pxa.c, which was previously shared amongst the
entire PXA series.  Instead we now use sdhci-pxav3.c for mmp2 and
sdhci-pxav2.c for pxa9xx.

Signed-off-by: Zhangfei Gao 
Acked-by: Philip Rakity 
Acked-by: Mark F. Brown 
Signed-off-by: Chris Ball

mmc: host: split up sdhci-pxa, create sdhci-pxav2.c

2011-07-20T21:20:50+00:00

sdhci-pltfm driver for PXAV2 SoCs, such as pxa910.

Signed-off-by: Zhangfei Gao 
Signed-off-by: Jun Nie 
Signed-off-by: Qiming Wu 
Acked-by: Philip Rakity 
Acked-by: Mark F. Brown 
Signed-off-by: Chris Ball

mmc: host: split up sdhci-pxa, create sdhci-pxav3.c

2011-07-20T21:20:49+00:00

sdhci-pltfm driver for PXAV3 SoCs, such as MMP2.

Signed-off-by: Zhangfei Gao 
Signed-off-by: Philip Rakity 
Acked-by: Philip Rakity 
Acked-by: Mark F. Brown 
Signed-off-by: Chris Ball

mmc: sdhci: change sdhci-pltfm into a module

2011-07-20T21:20:49+00:00

There are a couple of problems left from the sdhci pltfm and OF
consolidation changes.

* When building more than one sdhci-pltfm based drivers in the same
  image, linker will give multiple definition error on the sdhci-pltfm
  helper functions.  For example right now, building sdhci-of-esdhc
  and sdhci-of-hlwd together is a valid combination from Kconfig view.

* With the current build method, there is error with building the
  drivers as module, but module installation fails with modprobe.

The patch fixes above problems by changing sdhci-pltfm into a module.
To avoid EXPORT_SYMBOL on so many big endian IO accessors, it moves
these accessors into sdhci-pltfm.h as the 'static inline' functions.
As a result, sdhci.h needs to be included in sdhci-pltfm.h, and in
turn can be removed from individual drivers which already include
sdhci-pltfm.h.

Signed-off-by: Shawn Guo 
Signed-off-by: Chris Ball

mmc: sdhci: make sdhci-of device drivers self registered

2011-07-20T21:20:47+00:00

The patch turns the sdhci-of-core common stuff into helper functions
added into sdhci-pltfm.c, and makes sdhci-of device drviers self
registered using the same pair of .probe and .remove used by
sdhci-pltfm device drivers.

As a result, sdhci-of-core.c and sdhci-of.h can be eliminated with
those common things merged into sdhci-pltfm.c and sdhci-pltfm.h
respectively.

Signed-off-by: Shawn Guo 
Acked-by: Anton Vorontsov 
Reviewed-by: Wolfram Sang 
Signed-off-by: Chris Ball

mmc: sdhci: make sdhci-pltfm device drivers self registered

2011-07-20T21:16:06+00:00

The patch turns the common stuff in sdhci-pltfm.c into functions, and
add device drivers their own .probe and .remove which in turn call
into the common functions, so that those sdhci-pltfm device drivers
register itself and keep all device specific things away from common
sdhci-pltfm file.

Signed-off-by: Shawn Guo 
Reviewed-by: Grant Likely 
Acked-by: Arnd Bergmann 
Acked-by: Anton Vorontsov 
Signed-off-by: Chris Ball

mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver

2011-05-25T03:54:00+00:00

Add a driver for Elan Digital System's VUB300 chip which is a USB
connected SDIO/SDmem/MMC host controller.  A VUB300 chip enables a USB 2.0
or USB 1.1 connected host computer to use SDIO/SD/MMC cards without the
need for a directly connected, for example via PCI, SDIO host controller.

Signed-off-by: Anthony F Olech 
[cjb: various punctuation and style fixes]
Tested-by: Chris Ball 
Signed-off-by: Chris Ball