This DWC MSHC has a 128MB limitation where the data buffer size and start
address must not exceed the 128MB boundary. Registering the missing
'adma_write_desc' callback function.

Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 32b2633219d3 ("mmc: sdhci-of-dwcmshc: Add support for Eswin EIC7700")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Accessing the High-Speed registers requires the AXI clock to be enabled.

Signed-off-by: Huan He <hehuan1@eswincomputing.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 32b2633219d3 ("mmc: sdhci-of-dwcmshc: Add support for Eswin EIC7700")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

rtsx_pci_sdmmc does not have an sdmmc_card_busy function, so any voltage
switches cause a kernel warning, "mmc0: cannot verify signal voltage
switch."

Copy the sdmmc_card_busy function from rtsx_pci_usb to rtsx_pci_sdmmc to
fix this.

Fixes: ff984e57d36e ("mmc: Add realtek pcie sdmmc host driver")
Signed-off-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Tested-by: Ricky WU <ricky_wu@realtek.com>
Reviewed-by: Ricky WU <ricky_wu@realtek.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

When operating in HS200 or HS400 timing modes, reducing the clock frequency
below 52MHz will lead to link broken as the Rockchip DWC MSHC controller
requires maintaining a minimum clock of 52MHz in these modes.

Add a check to prevent illegal clock reduction through debugfs:

root@debian:/# echo 50000000 > /sys/kernel/debug/mmc0/clock
root@debian:/# [   30.090146] mmc0: running CQE recovery
mmc0: cqhci: Failed to halt
mmc0: cqhci: spurious TCN for tag 0
WARNING: drivers/mmc/host/cqhci-core.c:797 at cqhci_irq+0x254/0x818, CPU#1: kworker/1:0H/24
Modules linked in:
CPU: 1 UID: 0 PID: 24 Comm: kworker/1:0H Not tainted 6.19.0-rc1-00001-g09db0998649d-dirty #204 PREEMPT
Hardware name: Rockchip RK3588 EVB1 V10 Board (DT)
Workqueue: kblockd blk_mq_run_work_fn
pstate: 604000c9 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : cqhci_irq+0x254/0x818
lr : cqhci_irq+0x254/0x818
...

Fixes: c6f361cba51c ("mmc: sdhci-of-dwcmshc: add support for rk3588")
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Cc: Yifeng Zhao <yifeng.zhao@rock-chips.com>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

MMC_SDHCI_ESDHC_IMX requires ARCH_MXC despite also being used on
ARCH_S32, which results in unmet dependencies when compiling strictly
for ARCH_S32. Resolve this by adding ARCH_S32 as an alternative to
ARCH_MXC in the driver's dependencies.

Fixes: 5c4f00627c9a ("mmc: sdhci-esdhc-imx: add NXP S32G2 support")
Cc: stable@bvger.kernel.org
Signed-off-by: Jared Kangas <jkangas@redhat.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

On Xilinx/AMD platforms, the CD stable bit take slightly longer than
one second(about an additional 100ms) to assert after a host
controller reset. Although no functional failure observed with the
existing one second delay but to ensure reliable initialization, increase
the CD stable timeout to 2 seconds.

Fixes: e251709aaddb ("mmc: sdhci-of-arasan: Ensure CD logic stabilization before power-up")
Cc: stable@vger.kernel.org
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

CQHCI_SSC1.CIT indicates to the CQE the polling period to use for
periodic SEND_QUEUE_STATUS (CMD13) polling. Some eMMCs have only one
hardware queue, and CMD13 can only query one slot at a time for data
transmission, which cannot be processed in parallel. Modifying the
CMD13 query interval can increase the query frequency and improve
random write performance.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Enabling CMDQ support can lead to random occurrences of the error log when
there are RPMB access and data flush executed:

"mmc2: Timeout waiting for hardware interrupt."

Enabling CMDQ and then issuing a DCMD as the final command before disabling
it causes the eMMC controller to auto-gate its internal clock. Chip simulation
shows this results in a state machine mismatch after CMDQ mode exit, triggering
data-timeout errors for all subsequent read and write operations.

Therefore, the auto-clock-gate function must be disabled whenever CMDQ is
enabled.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: fda1e0af7c28 ("mmc: sdhci-of-dwcmshc: Add command queue support for rockchip SOCs")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Merge the mmc fixes for v6.18-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.19.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Commit 27e8fe0da3b7 ("mmc: sdhci-of-dwcmshc: Prevent stale command
interrupt handling") clears pending interrupts when resetting
host->pending_reset to ensure no pending stale interrupts after
sdhci_threaded_irq restores interrupts. But this fix is only added for
th1520 platforms, in fact per my test, this issue exists on all
dwcmshc users, such as cv1800b, sg2002, and synaptics platforms.

So promote the above reset handling from th1520 to ip level. And keep
reset handling on rk, sg2042 and bf3 as is, until it's confirmed that
the same issue exists on these platforms too.

Fixes: 017199c2849c ("mmc: sdhci-of-dwcmshc: Add support for Sophgo CV1800B and SG2002")
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>