linux-toradex.git/drivers/mmc, branch v3.0.29 Linux kernel for Apalis and Colibri modules mmc: atmel-mci: correct data timeout computation 2012-04-13T15:14:07+00:00 Ludovic Desroches ludovic.desroches@atmel.com 2012-03-28T10:28:33+00:00 52a77de9f23e3b3d88354ee59a8923d566935abd commit 66292ad92c6d3f2f1c137a1c826b331ca8595dfd upstream. The HSMCI operates at a rate of up to Master Clock divided by two. Moreover previous calculation can cause overflows and so wrong timeouts. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 66292ad92c6d3f2f1c137a1c826b331ca8595dfd upstream.

The HSMCI operates at a rate of up to Master Clock divided by two.
Moreover previous calculation can cause overflows and so wrong
timeouts.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmc: sdhci-esdhc-imx: fix for mmc cards on i.MX5 2012-03-12T17:32:55+00:00 Sascha Hauer s.hauer@pengutronix.de 2012-02-17T10:51:49+00:00 d5d292475ce5ed9d9cbc3630e0a5fbed8155bb3a commit 5b6b0ad6e572b32a641116aaa5f897ffebe31e44 upstream. On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION command. This works for SD cards. However, with MMC cards the MMC_SET_BLOCK_COUNT command is used instead, but this needs the same handling. Fix MMC cards by testing for the MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53 board with a Transcend MMC+ card and eMMC. The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this is a regression for these boards introduced in 3.0; it should go to 3.0/3.1/3.2-stable. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 5b6b0ad6e572b32a641116aaa5f897ffebe31e44 upstream.

On i.MX53 we have to write a special SDHCI_CMD_ABORTCMD to the
SDHCI_TRANSFER_MODE register during a MMC_STOP_TRANSMISSION
command. This works for SD cards. However, with MMC cards
the MMC_SET_BLOCK_COUNT command is used instead, but this
needs the same handling. Fix MMC cards by testing for the
MMC_SET_BLOCK_COUNT command aswell. Tested on a custom i.MX53
board with a Transcend MMC+ card and eMMC.

The kernel started used MMC_SET_BLOCK_COUNT in 3.0, so this
is a regression for these boards introduced in 3.0; it should
go to 3.0/3.1/3.2-stable.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmc: core: check for zero length ioctl data 2012-03-01T00:33:42+00:00 Johan Rudholm johan.rudholm@stericsson.com 2011-11-23T08:05:58+00:00 e9513216eb2c0276e227fbb9a6f754e16c9c7510 commit 4d6144de8ba263eb3691a737c547e5b2fdc45287 upstream. If the read or write buffer size associated with the command sent through the mmc_blk_ioctl is zero, do not prepare data buffer. This enables a ioctl(2) call to for instance send a MMC_SWITCH to set a byte in the ext_csd. Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
commit 4d6144de8ba263eb3691a737c547e5b2fdc45287 upstream.

If the read or write buffer size associated with the command sent
through the mmc_blk_ioctl is zero, do not prepare data buffer.

This enables a ioctl(2) call to for instance send a MMC_SWITCH to set
a byte in the ext_csd.

Signed-off-by: Johan Rudholm <johan.rudholm@stericsson.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mmc: sd: Fix SDR12 timing regression 2012-01-26T01:24:46+00:00 Alexander Elbs alex@segv.de 2012-01-04T04:26:53+00:00 b1830247c9927d7d2ca17c9f84908fc130051792 commit dd8df17fe83483d7ea06ff229895e35a42071599 upstream. This patch fixes a failure to recognize SD cards reported on a Dell Vostro with O2 Micro SD card reader. Patch 49c468f ("mmc: sd: add support for uhs bus speed mode selection") caused the problem, by setting the SDHCI_CTRL_HISPD flag even for legacy timings. Signed-off-by: Alexander Elbs <alex@segv.de> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Arindam Nath <arindam.nath@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit dd8df17fe83483d7ea06ff229895e35a42071599 upstream.

This patch fixes a failure to recognize SD cards reported on a Dell
Vostro with O2 Micro SD card reader.  Patch 49c468f ("mmc: sd: add
support for uhs bus speed mode selection") caused the problem, by
setting the SDHCI_CTRL_HISPD flag even for legacy timings.

Signed-off-by: Alexander Elbs <alex@segv.de>
Acked-by: Philip Rakity <prakity@marvell.com>
Acked-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mmc: sdhci: Fix tuning timer incorrect setting when suspending host 2012-01-26T01:24:46+00:00 Aaron Lu aaron.lu@amd.com 2011-12-28T03:11:12+00:00 62a0e438f7275e845bfbcccd6e641e07d4b89182 commit c6ced0db08010ed75df221a2946c5228454b38d5 upstream. When suspending host, the tuning timer shoule be deactivated. And the HOST_NEEDS_TUNING flag should be set after tuning timer is deactivated. Signed-off-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Aaron Lu <aaron.lu@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit c6ced0db08010ed75df221a2946c5228454b38d5 upstream.

When suspending host, the tuning timer shoule be deactivated.
And the HOST_NEEDS_TUNING flag should be set after tuning timer is
deactivated.

Signed-off-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Aaron Lu <aaron.lu@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mmc: core: Fix voltage select in DDR mode 2012-01-26T01:24:45+00:00 Girish K S girish.shivananjappa@linaro.org 2011-12-15T11:57:42+00:00 1cfbbb9ba574157c9f2312d3267762fdde0bfc59 commit 913047e9e5787a90696533a9f109552b7694ecc9 upstream. This patch fixes the wrong comparison before setting the interface voltage in DDR mode. The assignment to the variable ddr before comaprison is either ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V. Signed-off-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 913047e9e5787a90696533a9f109552b7694ecc9 upstream.

This patch fixes the wrong comparison before setting the interface
voltage in DDR mode.

The assignment to the variable ddr before comaprison is either
ddr = MMC_1_2V_DDR_MODE; or ddr == MMC_1_8V_DDR_MODE. But the comparison
is done with the extended csd value if ddr == EXT_CSD_CARD_TYPE_DDR_1_2V.

Signed-off-by: Girish K S <girish.shivananjappa@linaro.org>
Acked-by: Subhash Jadavani <subhashj@codeaurora.org>
Acked-by: Philip Rakity <prakity@marvell.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ARM: 7220/1: mmc: mmci: Fixup error handling for dma 2012-01-06T22:13:56+00:00 Ulf Hansson ulf.hansson@stericsson.com 2011-12-13T15:58:43+00:00 9267a9e850bf6c52dd7c95f3978dc78a1d3ad1a1 commit 3b6e3c73851a9a4b0e6ed9d378206341dd65e8a5 upstream. When getting a cmd irq during an ongoing data transfer with dma, the dma job were never terminated. This is now corrected. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Per Forlin <per.forlin@stericsson.com> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 3b6e3c73851a9a4b0e6ed9d378206341dd65e8a5 upstream.

When getting a cmd irq during an ongoing data transfer
with dma, the dma job were never terminated. This is now
corrected.

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Per Forlin <per.forlin@stericsson.com>
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
ARM: 7214/1: mmc: mmci: Fixup handling of MCI_STARTBITERR 2012-01-06T22:13:56+00:00 Ulf Hansson ulf.hansson@stericsson.com 2011-12-13T15:51:04+00:00 bc23ab0861a252bdbdf3bd982c37a6a96c2ceba6 commit b63038d6f4ca5d1849ce01d9fc5bb9cb426dec73 upstream. The interrupt was previously enabled and then correctly cleared. Now we also handle it correctly. Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit b63038d6f4ca5d1849ce01d9fc5bb9cb426dec73 upstream.

The interrupt was previously enabled and then correctly cleared.
Now we also handle it correctly.

Tested-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mmc: vub300: fix type of firmware_rom_wait_states module parameter 2012-01-06T22:13:52+00:00 Rusty Russell rusty@rustcorp.com.au 2011-12-15T03:04:50+00:00 2aad1ca4711a46ca4540c924ffb84e7673a4738c commit 61074287c2965edf0fc75b54ae8f4ce99f182669 upstream. You didn't mean this to be a bool. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Tony Olech <tony.olech@elandigitalsystems.com> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit 61074287c2965edf0fc75b54ae8f4ce99f182669 upstream.

You didn't mean this to be a bool.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Tony Olech <tony.olech@elandigitalsystems.com>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
mmc: mxcmmc: fix falling back to PIO 2011-12-21T20:57:39+00:00 Sascha Hauer s.hauer@pengutronix.de 2011-11-11T15:28:05+00:00 53824693961bf513fe152d35c887e83eb016eaea commit e58f516ff4730c4047c3f104b061f7a03e9a263c upstream. When we can't configure the dma channel we want to fall back to PIO. We do this by setting host->do_dma to zero. This does not work as do_dma is used to see whether dma can be used for the current transfer. Instead, we have to set host->dma to NULL. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
commit e58f516ff4730c4047c3f104b061f7a03e9a263c upstream.

When we can't configure the dma channel we want to fall
back to PIO. We do this by setting host->do_dma to zero.
This does not work as do_dma is used to see whether dma
can be used for the current transfer. Instead, we have
to set host->dma to NULL.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>