linux-toradex.git/drivers/mmc, branch v3.12.25

mmc: rtsx: add R1-no-CRC mmc command type handle

2014-07-18T13:51:10+00:00

commit 5027251eced6e34315a52bd841279df957f627bb upstream.

a27fbf2f067b0cd ("mmc: add ignorance case for CMD13 CRC error") produced
a cmd.flags unhandled in realtek pci host driver.  This will make MMC
card fail to initialize, this patch is used to handle the new cmd.flags
condition and MMC card can be used.

Signed-off-by: Micky Ching 
Signed-off-by: Ulf Hansson 
Signed-off-by: Chris Ball 
Signed-off-by: Jiri Slaby

mmc: sdhci-bcm-kona: fix build errors when built-in

2014-05-15T07:56:17+00:00

commit 4025ce24f326830135341814307c072f6c2a7738 upstream.

`sdhci_bcm_kona_remove' referenced in section `.data' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o

Fixes: 058feb53666f ("mmc: sdhci-bcm-kona: make linker-section warning go away")
Signed-off-by: Russell King 
Tested-by: Markus Mayer 
Acked-by: Matt Porter 
Signed-off-by: Chris Ball 
Signed-off-by: Jiri Slaby

mmc: sdhci-pci: Fix possibility of chip->fixes being null

2014-02-13T21:50:26+00:00

commit 945be38caa287b177b8c17ffaae7754cab6a658f upstream.

It is possible for chip->fixes to be null.  Check before dereferencing it.

Signed-off-by: Adrian Hunter 
Signed-off-by: Chris Ball 
Signed-off-by: Greg Kroah-Hartman

mmc: sdhci-pci: Fix BYT sd card getting stuck in runtime suspend

2014-02-13T21:50:26+00:00

commit 77a0122e0838663795651aa0beb2325156f98c09 upstream.

A host controller for a SD card may need a GPIO for card detect in order
to wake up from runtime suspend when a card is inserted.  If that GPIO is
not configured, then the host controller will not wake up.  Fix that for
the affected devices by not enabling runtime PM unless the GPIO is
successfully set up.

This affects BYT sd card host controller which had runtime PM enabled from
v3.11.  For completeness, the MFD sd card host controller is flagged also.

The original patch before rebasing (see link below) was tested on v3.11.10
and v3.12.4 although the patch applied with some offsets and fuzz.  The
original patch is here:

    http://marc.info/?l=linux-mmc&m=138676702327057

Signed-off-by: Adrian Hunter 
Signed-off-by: Chris Ball 
Signed-off-by: Greg Kroah-Hartman

mmc: core: sd: implement proper support for sd3.0 au sizes

2014-02-13T21:50:12+00:00

commit 9288cac05405a7da406097a44721aa4004609b4d upstream.

This reverts and updates commit 77776fd0a4cc541b9 ("mmc: sd: fix the
maximum au_size for SD3.0"). The au_size for SD3.0 cannot be achieved
by a simple bit shift, so this needs to be implemented differently.
Also, don't print the warning in case of 0 since 'not defined' is
different from 'invalid'.

Signed-off-by: Wolfram Sang 
Acked-by: Jaehoon Chung 
Reviewed-by: H Hartley Sweeten 
Signed-off-by: Chris Ball 
Signed-off-by: Greg Kroah-Hartman

mmc: atmel-mci: fix timeout errors in SDIO mode when using DMA

2014-02-13T21:50:12+00:00

commit 66b512eda74d59b17eac04c4da1b38d82059e6c9 upstream.

With some SDIO devices, timeout errors can happen when reading data.
To solve this issue, the DMA transfer has to be activated before sending
the command to the device. This order is incorrect in PDC mode. So we
have to take care if we are using DMA or PDC to know when to send the
MMC command.

Signed-off-by: Ludovic Desroches 
Acked-by: Nicolas Ferre 
Signed-off-by: Chris Ball 
Signed-off-by: Greg Kroah-Hartman

mmc: fix host release issue after discard operation

2014-02-13T21:50:12+00:00

commit f662ae48ae67dfd42739e65750274fe8de46240a upstream.

Under function mmc_blk_issue_rq, after an MMC discard operation,
the MMC request data structure may be freed in memory. Later in
the same function, the check of req->cmd_flags & MMC_REQ_SPECIAL_MASK
is dangerous and invalid. It causes the MMC host not to be released
when it should.

This patch fixes the issue by marking the special request down before
the discard/flush operation.

Reported by: Harold (SoonYeal) Yang 
Signed-off-by: Ray Jui 
Reviewed-by: Seungwon Jeon 
Acked-by: Seungwon Jeon 
Signed-off-by: Chris Ball 
Signed-off-by: Greg Kroah-Hartman

mmc: atmel-mci: fix oops in atmci_tasklet_func

2013-12-04T19:05:27+00:00

commit fbd986cd420d1deeabf1039ec4e74075a5639db5 upstream.

In some cases, a NULL pointer dereference happens because data is NULL when
STATE_END_REQUEST case is reached in atmci_tasklet_func.

Signed-off-by: Rodolfo Giometti 
Acked-by: Ludovic Desroches 
Acked-by: Nicolas Ferre 
Signed-off-by: Chris Ball 
Signed-off-by: Greg Kroah-Hartman

mmc: atmel-mci: abort transfer on timeout error

2013-12-04T19:05:27+00:00

commit c1fa3426aa5c782724c97394303d52228206eda4 upstream.

When a software timeout occurs, the transfer is not stopped. In DMA case,
it causes DMA channel to be stuck because the transfer is still active
causing following transfers to be queued but not computed.

Signed-off-by: Ludovic Desroches 
Reported-by: Alexander Morozov 
Acked-by: Nicolas Ferre 
Signed-off-by: Chris Ball 
Signed-off-by: Greg Kroah-Hartman

ARM: shmobile: update SDHI DT compatibility string to the - format

2013-09-21T16:55:32+00:00

Currently DT compatibility strings of both types can be found in the kernel
sources: - and -, whereas a unique format should be
followed and the former one is preferred. This patch converts the SDHI
MMC driver and its users to the common standard. This is safe for now, since
ATM no real products are using this driver with DT.

Signed-off-by: Guennadi Liakhovetski 
Acked-by: Chris Ball 
[Removed r8a7740.dtsi portion as it is not applicable]
Signed-off-by: Simon Horman