linux-toradex.git/drivers/mmc, branch v4.16 Linux kernel for Apalis and Colibri modules mmc: sdhci-acpi: Fix IRQ 0 2018-03-21T10:10:20+00:00 Adrian Hunter adrian.hunter@intel.com 2018-03-21T09:49:40+00:00 d58ac803cfbb92ede501409dd6afe9abb111d4f1 Zero is a valid IRQ number and is being used on some CHT tablets. Stop treating it as an error. Reported-by: Luke Ross <luke@lukeross.name> Fixes: 1b7ba57ecc86 ("mmc: sdhci-acpi: Handle return value of platform_get_irq") Cc: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Zero is a valid IRQ number and is being used on some CHT tablets. Stop
treating it as an error.

Reported-by: Luke Ross <luke@lukeross.name>
Fixes: 1b7ba57ecc86 ("mmc: sdhci-acpi: Handle return value of platform_get_irq")
Cc: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: dw_mmc: fix falling from idmac to PIO mode when dw_mci_reset occurs 2018-03-16T07:38:54+00:00 Evgeniy Didin Evgeniy.Didin@synopsys.com 2018-03-14T19:30:51+00:00 47b7de2f6c18f75d1f2716efe752cba43f32a626 It was found that in IDMAC mode after soft-reset driver switches to PIO mode. That's what happens in case of DTO timeout overflow calculation failure: 1. soft-reset is called 2. driver restarts dma 3. descriptors states are checked, one of descriptor is owned by the IDMAC. 4. driver can't use DMA and then switches to PIO mode. Failure was already fixed in: https://www.spinics.net/lists/linux-mmc/msg48125.html. Behaviour while soft-reset is not something we except or even want to happen. So we switch from dw_mci_idmac_reset to dw_mci_idmac_init, so descriptors are cleaned before starting dma. And while at it explicitly zero des0 which otherwise might contain garbage as being allocated by dmam_alloc_coherent(). Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: linux-snps-arc@lists.infradead.org Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
It was found that in IDMAC mode after soft-reset driver switches
to PIO mode.

That's what happens in case of DTO timeout overflow calculation failure:
1. soft-reset is called
2. driver restarts dma
3. descriptors states are checked, one of descriptor is owned by the IDMAC.
4. driver can't use DMA and then switches to PIO mode.

Failure was already fixed in:
https://www.spinics.net/lists/linux-mmc/msg48125.html.

Behaviour while soft-reset is not something we except or
even want to happen. So we switch from dw_mci_idmac_reset
to dw_mci_idmac_init, so descriptors are cleaned before starting dma.

And while at it explicitly zero des0 which otherwise might
contain garbage as being allocated by dmam_alloc_coherent().

Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Jaehoon Chung <jh80.chung@samsung.com>
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Cc: Shawn Lin <shawn.lin@rock-chips.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: linux-snps-arc@lists.infradead.org
Cc: <stable@vger.kernel.org> # 4.4+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards 2018-03-15T09:50:59+00:00 Dirk Behme dirk.behme@de.bosch.com 2018-03-14T14:50:09+00:00 dbe7dc6b9b28f5b012b0bedc372aa0c52521f3e4 Certain Micron eMMC v4.5 cards might get broken when HPI feature is used and hence this patch disables the HPI feature for such buggy cards. In U-Boot, these cards are reported as Manufacturer: Micron (ID: 0xFE) OEM: 0x4E Name: MMC32G Revision: 19 (0x13) Serial: 959241022 Manufact. date: 8/2015 (0x82) CRC: 0x00 Tran Speed: 52000000 Rd Block Len: 512 MMC version 4.5 High Capacity: Yes Capacity: 29.1 GiB Boot Partition Size: 16 MiB Bus Width: 8-bit According to JEDEC JEP106 manufacturer 0xFE is Numonyx, which was bought by Micron. Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Mark Craske <Mark_Craske@mentor.com> Cc: <stable@vger.kernel.org> # 4.8+ Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Certain Micron eMMC v4.5 cards might get broken when HPI feature is used
and hence this patch disables the HPI feature for such buggy cards.

In U-Boot, these cards are reported as

Manufacturer: Micron (ID: 0xFE)
OEM: 0x4E
Name: MMC32G
Revision: 19 (0x13)
Serial: 959241022  Manufact. date: 8/2015 (0x82)  CRC: 0x00
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.5
High Capacity: Yes
Capacity: 29.1 GiB
Boot Partition Size: 16 MiB
Bus Width: 8-bit

According to JEDEC JEP106 manufacturer 0xFE is Numonyx, which was bought by
Micron.

Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Mark Craske <Mark_Craske@mentor.com>
Cc: <stable@vger.kernel.org> # 4.8+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: dw_mmc: exynos: fix the suspend/resume issue for exynos5433 2018-03-15T09:34:30+00:00 Jaehoon Chung jh80.chung@samsung.com 2018-03-09T06:10:21+00:00 e22842dd64bf86753d3f2b6ea474d73fc1e6ca24 Before enabling the clock, dwmmc exynos driver is trying to access the register. Then the kernel panic can be occurred. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Chanwoo Choi <cw00.choi@samsung.com> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Before enabling the clock, dwmmc exynos driver is trying to access the
register. Then the kernel panic can be occurred.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: block: fix updating ext_csd caches on ioctl call 2018-03-15T09:31:38+00:00 Bastian Stender bst@pengutronix.de 2018-03-08T14:08:11+00:00 e74ef2194b41ba5e511fab29fe5ff00e72d2f42a PARTITION_CONFIG is cached in mmc_card->ext_csd.part_config and the currently active partition in mmc_blk_data->part_curr. These caches do not always reflect changes if the ioctl call modifies the PARTITION_CONFIG registers, e.g. by changing BOOT_PARTITION_ENABLE. Write the PARTITION_CONFIG value extracted from the ioctl call to the cache and update the currently active partition accordingly. This ensures that the user space cannot change the values behind the kernel's back. The next call to mmc_blk_part_switch() will operate on the data set by the ioctl and reflect the changes appropriately. Signed-off-by: Bastian Stender <bst@pengutronix.de> Signed-off-by: Jan Luebbe <jlu@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
PARTITION_CONFIG is cached in mmc_card->ext_csd.part_config and the
currently active partition in mmc_blk_data->part_curr. These caches do
not always reflect changes if the ioctl call modifies the
PARTITION_CONFIG registers, e.g. by changing BOOT_PARTITION_ENABLE.

Write the PARTITION_CONFIG value extracted from the ioctl call to the
cache and update the currently active partition accordingly. This
ensures that the user space cannot change the values behind the
kernel's back. The next call to mmc_blk_part_switch() will operate on
the data set by the ioctl and reflect the changes appropriately.

Signed-off-by: Bastian Stender <bst@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: dw_mmc: Fix the DTO/CTO timeout overflow calculation for 32-bit systems 2018-03-05T08:36:17+00:00 Evgeniy Didin Evgeniy.Didin@synopsys.com 2018-02-28T11:53:18+00:00 c7151602255a36ba07c84fe2baeef846fdb988b8 The commit 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") and commit 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation") made changes, which cause multiply overflow for 32-bit systems. The broken timeout calculations leads to unexpected ETIMEDOUT errors and causes stacktrace splat (such as below) during normal data exchange with SD-card. | Running : 4M-check-reassembly-tcp-cmykw2-rotatew2.out -v0 -w1 | - Info: Finished target initialization. | mmcblk0: error -110 transferring data, sector 320544, nr 2048, cmd | response 0x900, card status 0x0 DIV_ROUND_UP_ULL helps to escape usage of __udivdi3() from libgcc and so code gets compiled on all 32-bit platforms as opposed to usage of DIV_ROUND_UP when we may only compile stuff on a very few arches. Lets cast this multiply to u64 type to prevent the overflow. Fixes: 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") Fixes: 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation") Tested-by: Vineet Gupta <Vineet.Gupta1@synopsys.com> Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com> # ARC STAR 9001306872 HSDK, sdio: board crashes when copying big files Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com> Cc: <stable@vger.kernel.org> # 4.14 Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
The commit 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation")
and commit 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation")
made changes, which cause multiply overflow for 32-bit systems. The broken
timeout calculations leads to unexpected ETIMEDOUT errors and causes
stacktrace splat (such as below) during normal data exchange with SD-card.

| Running :  4M-check-reassembly-tcp-cmykw2-rotatew2.out -v0 -w1
| -  Info: Finished target initialization.
| mmcblk0: error -110 transferring data, sector 320544, nr 2048, cmd
| response 0x900, card status 0x0

DIV_ROUND_UP_ULL helps to escape usage of __udivdi3() from libgcc and so
code gets compiled on all 32-bit platforms as opposed to usage of
DIV_ROUND_UP when we may only compile stuff on a very few arches.

Lets cast this multiply to u64 type to prevent the overflow.

Fixes: 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation")
Fixes: 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation")
Tested-by: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Reported-by: Vineet Gupta <Vineet.Gupta1@synopsys.com> # ARC STAR 9001306872 HSDK, sdio: board crashes when copying big files
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: <stable@vger.kernel.org> # 4.14
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: core: Avoid hanging to claim host for mmc via some nested calls 2018-02-27T14:12:37+00:00 Ulf Hansson ulf.hansson@linaro.org 2018-02-27T10:49:09+00:00 3a574919f0cc15a46ec14c3e5e08300908991915 As the block layer, since the conversion to blkmq, claims the host using a context, a following nested call to mmc_claim_host(), which isn't using a context, may hang. Calling mmc_interrupt_hpi() and mmc_read_bkops_status() via the mmc block layer, may suffer from this problem, as these functions are calling mmc_claim|release_host(). Let's fix the problem by removing the calls to mmc_claim|release_host() from the above mentioned functions and instead make the callers responsible of claiming/releasing the host. As a matter of fact, the existing callers already deals with it. Fixes: 81196976ed94 ("mmc: block: Add blk-mq support") Reported-by: Dmitry Osipenko <digetx@gmail.com> Suggested-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> 
As the block layer, since the conversion to blkmq, claims the host using a
context, a following nested call to mmc_claim_host(), which isn't using a
context, may hang.

Calling mmc_interrupt_hpi() and mmc_read_bkops_status() via the mmc block
layer, may suffer from this problem, as these functions are calling
mmc_claim|release_host().

Let's fix the problem by removing the calls to mmc_claim|release_host()
from the above mentioned functions and instead make the callers responsible
of claiming/releasing the host. As a matter of fact, the existing callers
already deals with it.

Fixes: 81196976ed94 ("mmc: block: Add blk-mq support")
Reported-by: Dmitry Osipenko <digetx@gmail.com>
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
mmc: dw_mmc: Avoid accessing registers in runtime suspended state 2018-02-27T14:12:36+00:00 Shawn Lin shawn.lin@rock-chips.com 2018-02-23T08:47:25+00:00 5b43df8b4c1a7f0c3fbf793c9566068e6b1e570c cat /sys/kernel/debug/mmc0/regs will hang up the system since it's in runtime suspended state, so the genpd and biu_clk is off. This patch fixes this problem by calling pm_runtime_get_sync to wake it up before reading the registers. Fixes: e9ed8835e990 ("mmc: dw_mmc: add runtime PM callback") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
cat /sys/kernel/debug/mmc0/regs will hang up the system since
it's in runtime suspended state, so the genpd and biu_clk is
off. This patch fixes this problem by calling pm_runtime_get_sync
to wake it up before reading the registers.

Fixes: e9ed8835e990 ("mmc: dw_mmc: add runtime PM callback")
Cc: <stable@vger.kernel.org>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: dw_mmc: Fix out-of-bounds access for slot's caps 2018-02-27T14:12:25+00:00 Shawn Lin shawn.lin@rock-chips.com 2018-02-24T06:17:23+00:00 0d84b9e5631d923744767dc6608672df906dd092 Add num_caps field for dw_mci_drv_data to validate the controller id from DT alias and non-DT ways. Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Fixes: 800d78bfccb3 ("mmc: dw_mmc: add support for implementation specific callbacks") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Add num_caps field for dw_mci_drv_data to validate the controller
id from DT alias and non-DT ways.

Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: 800d78bfccb3 ("mmc: dw_mmc: add support for implementation specific callbacks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
mmc: dw_mmc: Factor out dw_mci_init_slot_caps 2018-02-27T14:11:49+00:00 Shawn Lin shawn.lin@rock-chips.com 2018-02-24T06:17:22+00:00 a4faa4929ed3be15e2d500d2405f992f6dedc8eb Factor out dw_mci_init_slot_caps to consolidate parsing all differents types of capabilities from host contrllers. No functional change intended. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Fixes: 800d78bfccb3 ("mmc: dw_mmc: add support for implementation specific callbacks") Cc: <stable@vger.kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> 
Factor out dw_mci_init_slot_caps to consolidate parsing
all differents types of capabilities from host contrllers.
No functional change intended.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: 800d78bfccb3 ("mmc: dw_mmc: add support for implementation specific callbacks")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>