linux-toradex.git/drivers/mmc, branch v5.11-rc6

mmc: core: don't initialize block size from ext_csd if not present

2021-01-15T11:09:15+00:00

If extended CSD was not available, the eMMC driver would incorrectly
set the block size to 0, as the data_sector_size field of ext_csd
was never initialized. This issue was exposed by commit 817046ecddbc
("block: Align max_hw_sectors to logical blocksize") which caused
max_sectors and max_hw_sectors to be set to 0 after setting the block
size to 0, resulting in a kernel panic in bio_split when attempting
to read from the device. Fix it by only reading the block size from
ext_csd if it is available.

Fixes: a5075eb94837 ("mmc: block: Allow disabling 512B sector size emulation")
Signed-off-by: Peter Collingbourne 
Reviewed-by: Damien Le Moal 
Link: https://linux-review.googlesource.com/id/If244d178da4d86b52034459438fec295b02d6e60
Acked-by: Adrian Hunter 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210114201405.2934886-1-pcc@google.com
Signed-off-by: Ulf Hansson

mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend

2021-01-13T11:06:37+00:00

Commit e7b5d63a82fe ("mmc: sdhci-brcmstb: Add shutdown callback")
that added a shutdown callback to the diver, is causing "mmc timeout"
errors on S5 suspend. The problem was that the "remove" was queuing
additional MMC commands after the "shutdown" and these caused
timeouts as the MMC queues were cleaned up for "remove". The
shutdown callback will be changed to calling sdhci-pltfm_suspend
which should get better power savings because the clocks will be
shutdown.

Fixes: e7b5d63a82fe ("mmc: sdhci-brcmstb: Add shutdown callback")
Signed-off-by: Al Cooper 
Acked-by: Florian Fainelli 
Acked-by: Adrian Hunter 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210107221509.6597-1-alcooperx@gmail.com
Signed-off-by: Ulf Hansson

mmc: sdhci-xenon: fix 1.8v regulator stabilization

2021-01-11T17:16:44+00:00

Automatic Clock Gating is a feature used for the power consumption
optimisation. It turned out that during early init phase it may prevent the
stable voltage switch to 1.8V - due to that on some platforms an endless
printout in dmesg can be observed: "mmc1: 1.8V regulator output did not
became stable" Fix the problem by disabling the ACG at very beginning of
the sdhci_init and let that be enabled later.

Fixes: 3a3748dba881 ("mmc: sdhci-xenon: Add Marvell Xenon SDHC core functionality")
Signed-off-by: Alex Leibovich 
Signed-off-by: Marcin Wojtas 
Cc: stable@vger.kernel.org
Acked-by: Adrian Hunter 
Link: https://lore.kernel.org/r/20201211141656.24915-1-mw@semihalf.com
Signed-off-by: Ulf Hansson

mmc: sdhci-of-dwcmshc: fix rpmb access

2021-01-11T16:50:51+00:00

Commit a44f7cb93732 ("mmc: core: use mrq->sbc when sending CMD23 for
RPMB") began to use ACMD23 for RPMB if the host supports ACMD23. In
RPMB ACM23 case, we need to set bit 31 to CMD23 argument, otherwise
RPMB write operation will return general fail.

However, no matter V4 is enabled or not, the dwcmshc's ARGUMENT2
register is 32-bit block count register which doesn't support stuff
bits of CMD23 argument. So let's handle this specific ACMD23 case.

From another side, this patch also prepare for future v4 enabling
for dwcmshc, because from the 4.10 spec, the ARGUMENT2 register is
redefined as 32bit block count which doesn't support stuff bits of
CMD23 argument.

Fixes: a44f7cb93732 ("mmc: core: use mrq->sbc when sending CMD23 for RPMB")
Signed-off-by: Jisheng Zhang 
Acked-by: Adrian Hunter 
Link: https://lore.kernel.org/r/20201229161625.38255233@xhacker.debian
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson

Merge tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

2020-12-15T23:57:25+00:00

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Initial support for SD express card/host

  MMC host:
   - mxc: Convert the driver to DT-only
   - mtk-sd: Add HS400 enhanced strobe support
   - mtk-sd: Add support for the MT8192 SoC variant
   - sdhci-acpi: Allow changing HS200/HS400 driver strength for AMDI0040
   - sdhci-esdhc-imx: Convert the driver to DT-only
   - sdhci-pci-gli: Improve performance for HS400 mode for GL9763E
   - sdhci-pci-gli: Reduce power consumption for GL9755
   - sdhci-xenon: Introduce ACPI support
   - tmio: Fix command error processing
   - tmio: Inform the core about the max_busy_timeout
   - tmio/renesas_sdhi: Support custom calculation of busy-wait time
   - renesas_sdhi: Reset SCC only when available
   - rtsx_pci: Add SD Express mode support for RTS5261
   - rtsx_pci: Various fixes and improvements for RTS5261

  MEMSTICK:
   - Minor fixes/improvements"

* tag 'mmc-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (72 commits)
  dt-bindings: mmc: eliminate yamllint warnings
  mmc: sdhci-xenon: introduce ACPI support
  mmc: sdhci-xenon: use clk only with DT
  mmc: sdhci-xenon: switch to device_* API
  mmc: sdhci-xenon: use match data for controllers variants
  dt-bindings: mmc: Fix xlnx,mio-bank property values for arasan driver
  mmc: renesas_sdhi: populate hook for longer busy_wait
  mmc: tmio: add hook for custom busy_wait calculation
  mmc: tmio: set max_busy_timeout
  dt-bindings: mmc: imx: fix the wrongly dropped imx8qm compatible string
  mmc: sdhci-pci-gli: Disable slow mode in HS400 mode for GL9763E
  mmc: sdhci: Use more concise device_property_read_u64
  memstick: r592: Fix error return in r592_probe()
  mmc: mxc: Convert the driver to DT-only
  mmc: mxs: Remove the unused .id_table
  mmc: sdhci-of-arasan: Fix fall-through warnings for Clang
  mmc: sdhci-pci-gli: Reduce power consumption for GL9755
  mmc: mediatek: depend on COMMON_CLK to fix compile tests
  mmc: pxamci: Fix error return code in pxamci_probe
  mmc: sdhci: Update firmware interface API
  ...

Merge tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

2020-12-15T22:10:09+00:00

Pull char / misc driver updates from Greg KH:
 "Here is the big char/misc driver update for 5.11-rc1.

  Continuing the tradition of previous -rc1 pulls, there seems to be
  more and more tiny driver subsystems flowing through this tree.

  Lots of different things, all of which have been in linux-next for a
  while with no reported issues:

   - extcon driver updates

   - habannalab driver updates

   - mei driver updates

   - uio driver updates

   - binder fixes and features added

   - soundwire driver updates

   - mhi bus driver updates

   - phy driver updates

   - coresight driver updates

   - fpga driver updates

   - speakup driver updates

   - slimbus driver updates

   - various small char and misc driver updates"

* tag 'char-misc-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (305 commits)
  extcon: max77693: Fix modalias string
  extcon: fsa9480: Support TI TSU6111 variant
  extcon: fsa9480: Rewrite bindings in YAML and extend
  dt-bindings: extcon: add binding for TUSB320
  extcon: Add driver for TI TUSB320
  slimbus: qcom: fix potential NULL dereference in qcom_slim_prg_slew()
  siox: Make remove callback return void
  siox: Use bus_type functions for probe, remove and shutdown
  spmi: Add driver shutdown support
  spmi: fix some coding style issues at the spmi core
  spmi: get rid of a warning when built with W=1
  uio: uio_hv_generic: use devm_kzalloc() for private data alloc
  uio: uio_fsl_elbc_gpcm: use device-managed allocators
  uio: uio_aec: use devm_kzalloc() for uio_info object
  uio: uio_cif: use devm_kzalloc() for uio_info object
  uio: uio_netx: use devm_kzalloc() for or uio_info object
  uio: uio_mf624: use devm_kzalloc() for uio_info object
  uio: uio_sercos3: use device-managed functions for simple allocs
  uio: uio_dmem_genirq: finalize conversion of probe to devm_ handlers
  uio: uio_dmem_genirq: convert simple allocations to device-managed
  ...

mmc: sdhci-xenon: introduce ACPI support

2020-12-11T09:08:37+00:00

Previous patches dropped the strict dependency on the OF_*
in the sdhci-xenon driver. As a result the ACPI support
can be introduced (except for the XENON_A3700 variant)
by adding the necessary ID's in the acpi_match_table.

Signed-off-by: Marcin Wojtas 
Link: https://lore.kernel.org/r/20201204171626.10935-5-mw@semihalf.com
Signed-off-by: Ulf Hansson

mmc: sdhci-xenon: use clk only with DT

2020-12-11T09:08:37+00:00

As a preparation for supporting ACPI, modify the driver
to use the clk framework only when booting with DT -
otherwise rely on the configuration done by firmware.
For that purpose introduce also a custom SDHCI get_max_clock
callback.

Signed-off-by: Marcin Wojtas 
Link: https://lore.kernel.org/r/20201204171626.10935-4-mw@semihalf.com
Signed-off-by: Ulf Hansson

mmc: sdhci-xenon: switch to device_* API

2020-12-11T09:08:37+00:00

In order to support both ACPI and DT, modify the driver
to use device_* routines for obtaining the properties
values.

Signed-off-by: Marcin Wojtas 
Link: https://lore.kernel.org/r/20201204171626.10935-3-mw@semihalf.com
Signed-off-by: Ulf Hansson

mmc: sdhci-xenon: use match data for controllers variants

2020-12-11T09:08:37+00:00

As a part of the ACPI support preparation resign from checking
compatible strings in the driver. Instead of that use a new
enum and assign the values to match data accordingly.

Signed-off-by: Marcin Wojtas 
Link: https://lore.kernel.org/r/20201204171626.10935-2-mw@semihalf.com
Signed-off-by: Ulf Hansson