Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Remove redundant pm_runtime_mark_last_busy() calls

  MMC host:
   - Convert drivers to use devm_mmc_alloc_host()
   - Remove redundant pm_runtime_mark_last_busy() calls
   - renesas_sdhi:
      - Add support for the RZ/T2H and RZ/N2H variants
      - Fix incorrect auto retuning for an SDIO card
   - rtsx_usb_sdmmc:
      - Add 74 clocks in poweron flow
      - Re-work the code in sd_set_power_mode()
   - loongson2:
      - Add driver for the Loongson-2K SD/SDIO controller
      -  Add support for the Loongson-2K2000 SD/SDIO/eMMC controller
   - sdhci:
      - Drop sdhci_free_host()/sdhci_pltfm_free() interface
      - Remove the sdhci_free_host() and sdhci_pltfm_free() helpers
   - sdhci-cadence: Add support for the Mobileye EyeQ controller
   - sdhci-esdhc-imx:
      - Optimize clock loopback selection
      - Don't change pinctrl in suspend if wakeup source
   - sdhci-msm:
      - Add support for the Milos variant
      - Add support for the qcs8300 variant
      - Ensure SD card power isn't ON when card gets removed
   - sdhci-of-k1: Disable HW busy detection"

* tag 'mmc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (102 commits)
  mmc: loongson2: Unify the function prefixes for loongson2_mmc_pdata
  mmc: loongson2: Fix error code in loongson2_mmc_resource_request()
  dt-bindings: mmc: sdhci-msm: document the Milos SDHCI Controller
  mmc: loongson2: prevent integer overflow in ret variable
  mmc: Remove redundant pm_runtime_mark_last_busy() calls
  mmc: sdhci-msm: Ensure SD card power isn't ON when card removed
  dt-bindings: mmc: Add sdhci compatible for qcs8300
  mmc: sdhci-cadence: use of_property_present
  mmc: loongson2: Add Loongson-2K2000 SD/SDIO/eMMC controller driver
  dt-bindings: mmc: loongson,ls2k0500-mmc: Add compatible for Loongson-2K2000
  mmc: loongson2: Add Loongson-2K SD/SDIO controller driver
  dt-bindings: mmc: Add Loongson-2K SD/SDIO/eMMC controller binding
  mmc: Convert ternary operator to str_true_false() helper
  dt-bindings: mmc: renesas,sdhi: Document RZ/T2H and RZ/N2H support
  mmc: sdhci-cadence: add Mobileye eyeQ support
  dt-bindings: mmc: cdns: add Mobileye EyeQ MMC/SDHCI controller
  mmc: rtsx_usb_sdmmc: Fix clang -Wimplicit-fallthrough in sd_set_power_mode()
  mmc: cb710-mmc: Convert ternary operator to str_plural() helper
  mmc: rtsx_usb_sdmmc: Add 74 clocks in poweron flow
  mmc: rtsx_usb_sdmmc: Re-work the code in sd_set_power_mode()
  ...

Pull power management updates from Rafael Wysocki:
 "As is tradition, cpufreq is the part with the largest number of
  updates that include core fixes and cleanups as well as updates of
  several assorted drivers, but there are also quite a few updates
  related to system sleep, mostly focused on asynchronous suspend and
  resume of devices and on making the integration of system suspend
  and resume with runtime PM easier.

  Runtime PM is also updated to allow some code duplication in drivers
  to be eliminated going forward and to work more consistently overall
  in some cases.

  Apart from that, there are some driver core updates related to PM
  domains that should help to address ordering issues with devm_ cleanup
  routines relying on PM domains, some assorted devfreq updates
  including core fixes and cleanups, tooling updates, and documentation
  and MAINTAINERS updates.

  Specifics:

   - Fix two initialization ordering issues in the cpufreq core and a
     governor initialization error path in it, and clean it up (Lifeng
     Zheng)

   - Add Granite Rapids support in no-HWP mode to the intel_pstate
     cpufreq driver (Li RongQing)

   - Make intel_pstate always use HWP_DESIRED_PERF when operating in the
     passive mode (Rafael Wysocki)

   - Allow building the tegra124 cpufreq driver as a module (Aaron
     Kling)

   - Do minor cleanups for Rust cpufreq and cpumask APIs and fix
     MAINTAINERS entry for cpu.rs (Abhinav Ananthu, Ritvik Gupta, Lukas
     Bulwahn)

   - Clean up assorted cpufreq drivers (Arnd Bergmann, Dan Carpenter,
     Krzysztof Kozlowski, Sven Peter, Svyatoslav Ryhel, Lifeng Zheng)

   - Add the NEED_UPDATE_LIMITS flag to the CPPC cpufreq driver
     (Prashant Malani)

   - Fix minimum performance state label error in the amd-pstate driver
     documentation (Shouye Liu)

   - Add the CPUFREQ_GOV_STRICT_TARGET flag to the userspace cpufreq
     governor and explain HW coordination influence on it in the
     documentation (Shashank Balaji)

   - Fix opencoded for_each_cpu() in idle_state_valid() in the DT
     cpuidle driver (Yury Norov)

   - Remove info about non-existing QoS interfaces from the PM QoS
     documentation (Ulf Hansson)

   - Use c_* types via kernel prelude in Rust for OPP (Abhinav Ananthu)

   - Add HiSilicon uncore frequency scaling driver to devfreq (Jie Zhan)

   - Allow devfreq drivers to add custom sysfs ABIs (Jie Zhan)

   - Simplify the sun8i-a33-mbus devfreq driver by using more devm
     functions (Uwe Kleine-König)

   - Fix an index typo in trans_stat() in devfreq (Chanwoo Choi)

   - Check devfreq governor before using governor->name (Lifeng Zheng)

   - Remove a redundant devfreq_get_freq_range() call from
     devfreq_add_device() (Lifeng Zheng)

   - Limit max_freq with scaling_min_freq in devfreq (Lifeng Zheng)

   - Replace sscanf() with kstrtoul() in set_freq_store() (Lifeng Zheng)

   - Extend the asynchronous suspend and resume of devices to handle
     suppliers like parents and consumers like children (Rafael Wysocki)

   - Make pm_runtime_force_resume() work for drivers that set the
     DPM_FLAG_SMART_SUSPEND flag and allow PCI drivers and drivers that
     collaborate with the general ACPI PM domain to set it (Rafael
     Wysocki)

   - Add kernel parameter to disable asynchronous suspend/resume of
     devices (Tudor Ambarus)

   - Drop redundant might_sleep() calls from some functions in the
     device suspend/resume core code (Zhongqiu Han)

   - Fix the handling of monitors connected right before waking up the
     system from sleep (tuhaowen)

   - Clean up MAINTAINERS entries for suspend and hibernation (Rafael
     Wysocki)

   - Fix error code path in the KEXEC_JUMP flow and drop a redundant
     pm_restore_gfp_mask() call from it (Rafael Wysocki)

   - Rearrange suspend/resume error handling in the core device suspend
     and resume code (Rafael Wysocki)

   - Fix up white space that does not follow coding style in the
     hibernation core code (Darshan Rathod)

   - Document return values of suspend-related API functions in the
     runtime PM framework (Sakari Ailus)

   - Mark last busy stamp in multiple autosuspend-related functions in
     the runtime PM framework and update its documentation (Sakari
     Ailus)

   - Take active children into account in pm_runtime_get_if_in_use() for
     consistency (Rafael Wysocki)

   - Fix NULL pointer dereference in get_pd_power_uw() in the dtpm_cpu
     power capping driver (Sivan Zohar-Kotzer)

   - Add support for the Bartlett Lake platform to the Intel RAPL power
     capping driver (Qiao Wei)

   - Add PL4 support for Panther Lake to the intel_rapl_msr power
     capping driver (Zhang Rui)

   - Update contact information in the PM ABI docs and maintainer
     information in the power domains DT binding (Rafael Wysocki)

   - Update PM header inclusions to follow the IWYU (Include What You
     Use) principle (Andy Shevchenko)

   - Add flags to specify power on attach/detach for PM domains, make
     the driver core detach PM domains in device_unbind_cleanup(), and
     drop the dev_pm_domain_detach() call from the platform bus type
     (Claudiu Beznea)

   - Improve Python binding's Makefile for cpupower (John B. Wyatt IV)

   - Fix printing of CORE, CPU fields in cpupower-monitor (Gautham
     Shenoy)"

* tag 'pm-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (75 commits)
  cpufreq: CPPC: Mark driver with NEED_UPDATE_LIMITS flag
  PM: docs: Use my kernel.org address in ABI docs and DT bindings
  PM: hibernate: Fix up white space that does not follow coding style
  PM: sleep: Rearrange suspend/resume error handling in the core
  Documentation: amd-pstate:fix minimum performance state label error
  PM: runtime: Take active children into account in pm_runtime_get_if_in_use()
  kexec_core: Drop redundant pm_restore_gfp_mask() call
  kexec_core: Fix error code path in the KEXEC_JUMP flow
  PM: sleep: Clean up MAINTAINERS entries for suspend and hibernation
  drivers: cpufreq: add Tegra114 support
  rust: cpumask: Replace `MaybeUninit` and `mem::zeroed` with `Opaque` APIs
  cpufreq: Exit governor when failed to start old governor
  cpufreq: Move the check of cpufreq_driver->get into cpufreq_verify_current_freq()
  cpufreq: Init policy->rwsem before it may be possibly used
  cpufreq: Initialize cpufreq-based frequency-invariance later
  cpufreq: Remove duplicate check in __cpufreq_offline()
  cpufreq: Contain scaling_cur_freq.attr in cpufreq_attrs
  cpufreq: intel_pstate: Add Granite Rapids support in no-HWP mode
  cpufreq: intel_pstate: Always use HWP_DESIRED_PERF in passive mode
  PM / devfreq: Add HiSilicon uncore frequency scaling driver
  ...

Merge miscellaneous power management updates and cpupower utility
updates for 6.17-rc1:

 - Update contact information in the PM ABI docs and maintainer
   information in the power domains DT binding (Rafael Wysocki)

 - Update PM header inclusions to follow the IWYU (Include What You Use)
   principle (Andy Shevchenko)

 - Add flags to specify power on attach/detach for PM domains, make the
   driver core detach PM domains in device_unbind_cleanup(), and drop
   the dev_pm_domain_detach() call from the platform bus type (Claudiu
   Beznea)

 - Improve Python binding's Makefile for cpupower (John B. Wyatt IV)

 - Fix printing of CORE, CPU fields in cpupower-monitor (Gautham Shenoy)

* pm-misc:
  PM: docs: Use my kernel.org address in ABI docs and DT bindings
  driver core: platform: Drop dev_pm_domain_detach() call
  PM: domains: Detach on device_unbind_cleanup()
  PM: domains: Add flags to specify power on attach/detach
  PM: Don't use "proxy" headers

* pm-tools:
  cpupower: Improve Python binding's Makefile
  pm: cpupower: Fix printing of CORE, CPU fields in cpupower-monitor
  pm: cpupower: Fix the snapshot-order of tsc,mperf, clock in mperf_stop()

The function prefixes for loongson2_mmc_pdata follow two naming
conventions: SoC-based and DMA-based.

First, DMA-based prefixes are the preferred choice, as they clearly
highlight differences, such as prepare_dma; however, for functions
related to SoC, such as reorder_cmd_data, it is agreed to use the
smallest SoC name as the fallback prefix, such as ls2k0500.

No functional change intended.

Suggested-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://lore.kernel.org/r/20250716064421.3823418-1-zhoubinbin@loongson.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

There is a cut and paste bug so we accidentally return the wrong
variable.  It should be "ret" instead of PTR_ERR(host->clk).

Fixes: 2115772014bd ("mmc: loongson2: Add Loongson-2K SD/SDIO controller driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/847bf395-6d62-49c9-a39d-8e82c5b17bf7@sabinyo.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

In loongson2_mmc_dll_mode_init(), `ret` variable is declared
as u32 but it is expected to hold an int value.

Fixes: d0f8e961deae ("mmc: loongson2: Add Loongson-2K2000 SD/SDIO/eMMC controller driver")
Reported-by: https://scan7.scan.coverity.com/#/project-view/53936/11354?selectedIssue=1644958
Signed-off-by: Sergio Perez Gonzalez <sperezglz@gmail.com>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/20250707185545.46275-1-sperezglz@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://lore.kernel.org/r/20250704075434.3220506-1-sakari.ailus@linux.intel.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Calling dev_pm_domain_attach()/dev_pm_domain_detach() in bus driver
probe/remove functions can affect system behavior when the drivers
attached to the bus use devres-managed resources. Since devres actions
may need to access device registers, calling dev_pm_domain_detach() too
early, i.e., before these actions complete, can cause failures on some
systems. One such example is Renesas RZ/G3S SoC-based platforms.

If the device clocks are managed via PM domains, invoking
dev_pm_domain_detach() in the bus driver's remove function removes the
device's clocks from the PM domain, preventing any subsequent
pm_runtime_resume*() calls from enabling those clocks.

The second argument of dev_pm_domain_attach() specifies whether the PM
domain should be powered on during attachment. Likewise, the second
argument of dev_pm_domain_detach() indicates whether the domain should be
powered off during detachment.

Upcoming changes address the issue described above (initially for the
platform bus only) by deferring the call to dev_pm_domain_detach() until
after devres_release_all() in device_unbind_cleanup(). The detach_power_off
field in struct dev_pm_info stores the detach power off info from the
second argument of dev_pm_domain_attach().

Because there are cases where the device's PM domain power-on/off behavior
must be conditional (e.g., in i2c_device_probe()), the patch introduces
PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF flags to be passed
to dev_pm_domain_attach().

Finally, dev_pm_domain_attach() and its users are updated to use the newly
introduced PD_FLAG_ATTACH_POWER_ON and PD_FLAG_DETACH_POWER_OFF macros.

This change is preparatory.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> # I2C
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/20250703112708.1621607-2-claudiu.beznea.uj@bp.renesas.com
[ rjw: Changelog adjustments ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Many mobile phones feature multi-card tray designs, where the same
tray is used for both SD and SIM cards. If the SD card is placed
at the outermost location in the tray, the SIM card may come in
contact with SD card power-supply while removing the tray, possibly
resulting in SIM damage.

To prevent that, make sure the SD card is really inserted by reading
the Card Detect pin state. If it's not, turn off the power in
sdhci_msm_check_power_status() and also set the BUS_FAIL power state
on the controller as part of pwr_irq handling for BUS_ON request.

Signed-off-by: Sarthak Garg <quic_sartgarg@quicinc.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20250701100659.3310386-1-quic_sartgarg@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Merge the mmc fixes for v6.16-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.17.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>