linux-toradex.git/drivers/mtd/devices/Makefile, branch v2.6.18.3 Linux kernel for Apalis and Colibri modules Remove inter_module_xxx() from DiskOnChip drivers. 2006-05-08T13:05:05+00:00 David Woodhouse dwmw2@infradead.org 2006-05-08T13:05:05+00:00 5e535429a9117b8b6219da0e0cb087f52c0c9597 Finally putting it back how it was before Keith got at it -- yay :) Signed-off-by: David Woodhouse <dwmw2@infradead.org> 
Finally putting it back how it was before Keith got at it -- yay :)

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
[PATCH] Remove blkmtd 2006-04-11T13:18:43+00:00 Joern Engel joern@wohnheim.fh-wedel.de 2006-04-11T05:54:17+00:00 acc8dadc0b3f007e6e60da77feb2efe2a19c5cda Remove the blkmtd driver. - An alternative exists (block2mtd) that hasn't had bug report for > 1 year. - Most embedded people tend to use ancient kernels with custom patches from mtd cvs and elsewhere, so the 1 year warning period neither helps nor hurts them too much. - It's in the way of klibc. The problems caused by pulling blkmtd support are fairly low, while the problems caused by delaying klibc can be fairly substantial. At best, this would be a severe burden on hpa's time. Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org> 
Remove the blkmtd driver.

- An alternative exists (block2mtd) that hasn't had  bug report for > 1 year.

- Most embedded people tend to use ancient kernels with custom patches from
  mtd cvs and elsewhere, so the 1 year warning period neither helps nor hurts
  them too much.

- It's in the way of klibc.  The problems caused by pulling blkmtd support
  are fairly low, while the problems caused by delaying klibc can be fairly
  substantial.  At best, this would be a severe burden on hpa's time.

Signed-off-by: Joern Engel <joern@wohnheim.fh-wedel.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] spi: M25 series SPI flash 2006-01-14T00:29:55+00:00 Mike Lavender mike@steroidmicros.com 2006-01-08T21:34:27+00:00 2f9f762879015d738a5ec2ac8a16be94b3a4a06d This was originally a driver for the ST M25P80 SPI flash. It's been updated slightly to handle other M25P series chips. For many of these chips, the specific type could be probed, but for now this just requires static setup with flash_platform_data that lists the chip type (size, format) and any default partitioning to use. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Cc: Mike Lavender <mike@steroidmicros.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
This was originally a driver for the ST M25P80 SPI flash.  It's been
updated slightly to handle other M25P series chips.

For many of these chips, the specific type could be probed, but for now
this just requires static setup with flash_platform_data that lists the
chip type (size, format) and any default partitioning to use.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Mike Lavender <mike@steroidmicros.com>
Cc: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
[PATCH] spi: mtd dataflash driver 2006-01-14T00:29:54+00:00 David Brownell david-b@pacbell.net 2006-01-08T21:34:22+00:00 1d6432fe10c3e724e307dd7137cd293a0edcae80 This is a conversion of the AT91rm9200 DataFlash MTD driver to use the lightweight SPI framework, and no longer be AT91-specific. It compiles down to less than 3KBytes on ARM. The driver allows board-specific init code to provide platform_data with the relevant MTD partitioning information, and hotplugs. This version has been lightly tested. Its parent at91_dataflash driver has been pretty well banged on, although kernel.org JFFS2 dataflash support was acting broken the last time I tried it. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> 
This is a conversion of the AT91rm9200 DataFlash MTD driver to use the
lightweight SPI framework, and no longer be AT91-specific.  It compiles
down to less than 3KBytes on ARM.

The driver allows board-specific init code to provide platform_data with
the relevant MTD partitioning information, and hotplugs.

This version has been lightly tested.  Its parent at91_dataflash driver has
been pretty well banged on, although kernel.org JFFS2 dataflash support was
acting broken the last time I tried it.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linux-2.6.12-rc2 2005-04-16T22:20:36+00:00 Linus Torvalds torvalds@ppc970.osdl.org 2005-04-16T22:20:36+00:00 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!