linux-toradex.git/drivers/mtd/spi-nor/debugfs.c, branch v6.3-rc5 Linux kernel for Apalis and Colibri modules mtd: spi-nor: fix memory leak when using debugfs_lookup() 2023-03-06T06:52:03+00:00 Greg Kroah-Hartman gregkh@linuxfoundation.org 2023-02-08T16:02:30+00:00 ec738ca127d07ecac6afae36e2880341ec89150e When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To solve this, remove the lookup and create the directory on the first device found, and then remove it when the module is unloaded. Cc: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: Pratyush Yadav <pratyush@kernel.org> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20230208160230.2179905-1-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To solve this, remove the
lookup and create the directory on the first device found, and then
remove it when the module is unloaded.

Cc: Tudor Ambarus <tudor.ambarus@microchip.com>
Cc: Pratyush Yadav <pratyush@kernel.org>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: linux-mtd@lists.infradead.org
Reviewed-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230208160230.2179905-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
mtd: spi-nor: Sort headers alphabetically 2023-02-06T08:37:03+00:00 Tudor Ambarus tudor.ambarus@linaro.org 2023-02-02T14:46:28+00:00 893fd950c89d516a7cf365700b2bd7bb3efc15a5 Sort headers alphabetically - it helps locating duplicates, and makes it easier to figure out where to insert new headers. Alphabetic order should also prove that each header is self-contained, i.e. can be included without prerequisites. Link: https://lore.kernel.org/r/20230202144628.14443-1-tudor.ambarus@linaro.org Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org> 
Sort headers alphabetically - it helps locating duplicates, and makes it
easier to figure out where to insert new headers. Alphabetic order should
also prove that each header is self-contained, i.e. can be included without
prerequisites.

Link: https://lore.kernel.org/r/20230202144628.14443-1-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
mtd: spi-nor: remember full JEDEC flash ID 2022-11-21T13:37:15+00:00 Michael Walle michael@walle.cc 2022-08-10T22:06:50+00:00 28ef7670414e309d8bbee41f9389b7e21a58572c At the moment, we print the JEDEC ID that is stored in our database. The generic flash support won't have such an entry in our database. To find out the JEDEC ID later we will have to cache it. There is also another advantage: If the flash is found in the database, the ID could be truncated because the ID of the entry is used which can be shorter. Some flashes still holds valuable information in the bytes after the JEDEC ID and come in handy during debugging of when coping with INFO6() entries. These are not accessible for now. Save a copy of the ID bytes after reading and display it via debugfs. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-4-michael@walle.cc 
At the moment, we print the JEDEC ID that is stored in our database. The
generic flash support won't have such an entry in our database. To find
out the JEDEC ID later we will have to cache it. There is also another
advantage: If the flash is found in the database, the ID could be
truncated because the ID of the entry is used which can be shorter. Some
flashes still holds valuable information in the bytes after the JEDEC ID
and come in handy during debugging of when coping with INFO6() entries.
These are not accessible for now.

Save a copy of the ID bytes after reading and display it via debugfs.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20220810220654.1297699-4-michael@walle.cc
mtd: spi-nor: s/addr_width/addr_nbytes 2022-07-28T02:11:56+00:00 Tudor Ambarus tudor.ambarus@microchip.com 2022-07-25T09:24:59+00:00 c452d49849d48bd37ae97fc2bc92c6435707c35f Address width was an unfortunate name, as it means the number of IO lines used for the address, whereas in the code it is used as the number of address bytes. s/addr_width/addr_nbytes throughout the entire SPI NOR framework. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220725092505.446315-2-tudor.ambarus@microchip.com 
Address width was an unfortunate name, as it means the number of IO lines
used for the address, whereas in the code it is used as the number of
address bytes. s/addr_width/addr_nbytes throughout the entire SPI NOR
framework.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Michael Walle <michael@walle.cc>
Acked-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220725092505.446315-2-tudor.ambarus@microchip.com
mtd: spi-nor: debugfs: fix format specifier 2022-05-12T12:26:44+00:00 Michael Walle michael@walle.cc 2022-05-12T11:20:27+00:00 c47452194641b5d27c20e557c84a46c85fd7ce37 The intention was to print the JEDEC ID in the following format: nn nn nn In this case format specifier has to be "%*ph". Fix it. Fixes: 0257be79fc4a ("mtd: spi-nor: expose internal parameters via debugfs") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220512112027.3771734-1-michael@walle.cc 
The intention was to print the JEDEC ID in the following format:
  nn nn nn

In this case format specifier has to be "%*ph". Fix it.

Fixes: 0257be79fc4a ("mtd: spi-nor: expose internal parameters via debugfs")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220512112027.3771734-1-michael@walle.cc
mtd: spi-nor: expose internal parameters via debugfs 2022-05-09T11:25:22+00:00 Michael Walle michael@walle.cc 2022-04-29T10:20:18+00:00 0257be79fc4a16a3252ce80aa13b3640f728c425 There is no way to gather all information to verify support for a new flash chip. Also if you want to convert an existing flash chip to the new SFDP parsing, there is not enough information to determine if the flash will work like before. To ease this development, expose internal parameters via the debugfs. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220429102018.2361038-2-michael@walle.cc 
There is no way to gather all information to verify support for a new
flash chip. Also if you want to convert an existing flash chip to the
new SFDP parsing, there is not enough information to determine if the
flash will work like before. To ease this development, expose internal
parameters via the debugfs.

Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Link: https://lore.kernel.org/r/20220429102018.2361038-2-michael@walle.cc