linux-toradex.git/drivers/mtd/spi-nor/debugfs.c, branch v7.0-rc2

mtd: spi-nor: core: get rid of SNOR_OVERLAID_REGION flag

2024-02-26T11:28:15+00:00

Only SNOR_OVERLAID_REGION is defined for flags in the spi_nor_erase_region
structure. It can be replaced by a boolean parameter.

Signed-off-by: Takahiro Kuwano 
Reviewed-by: Michael Walle 
Link: https://lore.kernel.org/r/076416d5dc8328dec72d31db12b9bec96bf0ac66.1708404584.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus

mtd: spi-nor: core: get rid of SNOR_LAST_REGION flag

2024-02-26T11:17:43+00:00

Introduce n_regions in spi_nor_erase_map structure and remove
SNOR_LAST_REGION flag. Loop logics that depend on the flag are also
reworked to use n_regions as loop condition.

Signed-off-by: Takahiro Kuwano 
Suggested-by: Tudor Ambarus 
Suggested-by: Michael Walle 
Reviewed-by: Michael Walle 
Link: https://lore.kernel.org/r/eded84294bd81e966d6f423e578fc2cfb9a4a5b6.1708404584.git.Takahiro.Kuwano@infineon.com
[ta: update spi_nor_init_erase_cmd_list() and break the for loop sooner.]
Signed-off-by: Tudor Ambarus

mtd: spi-nor: core: rework struct spi_nor_erase_region

2024-02-26T10:35:05+00:00

Encoding bitmask flags into offset worsen the code readability. The
erase type mask and flags should be stored in dedicated members. Also,
erase_map.uniform_erase_type can be removed as it is redundant.

Signed-off-by: Takahiro Kuwano 
Suggested-by: Michael Walle 
Reviewed-by: Michael Walle 
Link: https://lore.kernel.org/r/8e5e9e4081ed9f16ea9dce30693304a4b54d19b1.1708404584.git.Takahiro.Kuwano@infineon.com
[ta: remove spi_nor_region_end()]
Signed-off-by: Tudor Ambarus

mtd: spi-nor: add erase die (chip) capability

2023-12-06T09:24:42+00:00

JESD216 mentions die erase, but does not provide an opcode for it.
Check BFPT dword 11, bits 30:24, "Chip Erase, Typical time", it says:

"Typical time to erase one chip (die). User must poll device busy to
determine if the operation has completed. For a device consisting of
multiple dies, that are individually accessed, the time is for each die
to which a chip erase command is applied."

So when a flash consists of a single die, this is the erase time for the
full chip (die) erase, and when it consists of multiple dies, it's the
die erase time. Chip and die are the same thing.

Add support for die erase. For now, benefit of the die erase when addr
and len are aligned with die size. This could be improved however for
the uniform and non-uniform erases cases to use the die erase when
possible. For example if one requests that an erase of a 2 die device
starting from the last 64KB of the first die to the end of the flash
size, we could use just 2 commands, a 64KB erase and a die erase.
This improvement is left as an exercise for the reader.

Tested-by: Fabio Estevam 
Link: https://lore.kernel.org/r/20231125123529.55686-2-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus

mtd: spi-nor: Avoid setting SRWD bit in SR if WP# signal not connected

2023-07-13T02:32:09+00:00

Setting the status register write disable (SRWD) bit in the status
register (SR) with WP# signal of the flash left floating or wrongly tied to
GND (that includes internal pull-downs), will configure the SR permanently
as read-only. If WP# signal is left floating or wrongly tied to GND, avoid
setting SRWD bit while writing the SR during flash protection.

Signed-off-by: Amit Kumar Mahapatra 
Reviewed-by: Michael Walle 
Link: https://lore.kernel.org/r/20230630142233.63585-3-amit.kumar-mahapatra@amd.com
Signed-off-by: Tudor Ambarus

Merge tag 'mtd/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

2023-04-26T00:23:42+00:00

Pull mtd updates from Miquel Raynal:
 "Core MTD changes:
   - dt-bindings: Drop unneeded quotes
   - mtdblock: Tolerate corrected bit-flips
   - Use of_property_read_bool() for boolean properties
   - Avoid magic values
   - Avoid printing error messages on probe deferrals
   - Prepare mtd_otp_nvmem_add() to handle -EPROBE_DEFER
   - Fix error path for nvmem provider
   - Fix nvmem error reporting
   - Provide unique name for nvmem device

  MTD device changes:
   - lpddr_cmds: Remove unused words variable
   - bcm63xxpart: Remove MODULE_LICENSE in non-modules

  SPI NOR core changes:
   - Introduce Read While Write support for flashes featuring several
     banks
   - Set the 4-Byte Address Mode method based on SFDP data
   - Allow post_sfdp hook to return errors
   - Parse SCCR MC table and introduce support for multi-chip devices

  SPI NOR manufacturer drivers changes:
   - macronix: Add support for mx25uw51245g with RWW
   - spansion:
      - Determine current address mode at runtime as it can be changed
        in a non-volatile way and differ from factory defaults or from
        what SFDP advertises.
      - Enable JFFS2 write buffer mode for few ECC'd NOR flashes:
        S25FS256T, s25hx and s28hx
      - Add support for s25hl02gt and s25hs02gt

  Raw NAND core changes:
   - Convert to platform remove callback returning void
   - Fix spelling mistake waifunc() -> waitfunc()

  Raw NAND controller driver changes:
   - imx: Remove unused is_imx51_nfc and imx53_nfc functions
   - omap2: Drop obsolete dependency on COMPILE_TEST
   - orion: Use devm_platform_ioremap_resource()
   - qcom:
      - Use of_property_present() for testing DT property presence
      - Use devm_platform_get_and_ioremap_resource()
   - stm32_fmc2: Depends on ARCH_STM32 instead of MACH_STM32MP157
   - tmio: Remove reference to config MTD_NAND_TMIO in the parsers

  Raw NAND manufacturer driver changes:
   - hynix: Fix up bit 0 of sdr_timing_mode

  SPI-NAND changes:
   - Add support for ESMT F50x1G41LB"

* tag 'mtd/for-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (55 commits)
  mtd: nand: Convert to platform remove callback returning void
  mtd: onenand: omap2: Drop obsolete dependency on COMPILE_TEST
  mtd: spi-nor: spansion: Add support for s25hl02gt and s25hs02gt
  mtd: spi-nor: spansion: Add a new ->ready() hook for multi-chip device
  mtd: spi-nor: spansion: Rework cypress_nor_quad_enable_volatile() for multi-chip device support
  mtd: spi-nor: spansion: Rework cypress_nor_get_page_size() for multi-chip device support
  mtd: spi-nor: sfdp: Add support for SCCR map for multi-chip device
  mtd: spi-nor: Extract volatile register offset from SCCR map
  mtd: spi-nor: Allow post_sfdp hook to return errors
  mtd: spi-nor: spansion: Rename method to cypress_nor_get_page_size
  mtd: spi-nor: spansion: Enable JFFS2 write buffer for S25FS256T
  mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s25hx SEMPER flash
  mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash
  mtd: spi-nor: spansion: Determine current address mode
  mtd: spi-nor: core: Introduce spi_nor_set_4byte_addr_mode()
  mtd: spi-nor: core: Update flash's current address mode when changing address mode
  mtd: spi-nor: Stop exporting spi_nor_restore()
  mtd: spi-nor: Set the 4-Byte Address Mode method based on SFDP data
  mtd: spi-nor: core: Make spi_nor_set_4byte_addr_mode_brwr public
  mtd: spi-nor: core: Update name and description of spi_nor_set_4byte_addr_mode
  ...

mtd: spi-nor: spansion: Enable JFFS2 write buffer for Infineon s28hx SEMPER flash

2023-04-08T06:28:37+00:00

Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program
granularity is 16-byte ECC data unit size. JFFS2 supports write buffer
mode for ECC'd NOR flash. Provide a way to clear the MTD_BIT_WRITEABLE
flag in order to enable JFFS2 write buffer mode support.

A new SNOR_F_ECC flag is introduced to determine if the part has on-die
ECC and if it has, MTD_BIT_WRITEABLE is unset.

In vendor specific driver, a common cypress_nor_ecc_init() helper is
added. This helper takes care for ECC related initialization for SEMPER
flash family by setting up params->writesize and SNOR_F_ECC.

Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Suggested-by: Tudor Ambarus 
Signed-off-by: Takahiro Kuwano 
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/d586723f6f12aaff44fbcd7b51e674b47ed554ed.1680760742.git.Takahiro.Kuwano@infineon.com
Signed-off-by: Tudor Ambarus

mtd: spi-nor: Add a RWW flag

2023-03-29T10:46:07+00:00

Introduce a new (no SFDP) flag for the feature that we are about to
support: Read While Write. This means, if the chip has several banks and
supports RWW, once a page of data to write has been transferred into the
chip's internal SRAM, another read operation happening on a different
bank can be performed during the tPROG delay.

Signed-off-by: Miquel Raynal 
Link: https://lore.kernel.org/r/20230328154105.448540-7-miquel.raynal@bootlin.com
Signed-off-by: Tudor Ambarus

mtd: spi-nor: fix memory leak when using debugfs_lookup()

2023-03-06T06:52:03+00:00

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  To solve this, remove the
lookup and create the directory on the first device found, and then
remove it when the module is unloaded.

Cc: Tudor Ambarus 
Cc: Pratyush Yadav 
Cc: Miquel Raynal 
Cc: Richard Weinberger 
Cc: Vignesh Raghavendra 
Cc: linux-mtd@lists.infradead.org
Reviewed-by: Michael Walle 
Link: https://lore.kernel.org/r/20230208160230.2179905-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman

mtd: spi-nor: Sort headers alphabetically

2023-02-06T08:37:03+00:00

Sort headers alphabetically - it helps locating duplicates, and makes it
easier to figure out where to insert new headers. Alphabetic order should
also prove that each header is self-contained, i.e. can be included without
prerequisites.

Link: https://lore.kernel.org/r/20230202144628.14443-1-tudor.ambarus@linaro.org
Signed-off-by: Tudor Ambarus