linux-toradex.git/drivers/mtd/ubi, branch v3.2.10

UBI: make vid_hdr non-static

2012-01-26T00:13:25+00:00

commit 6bdccffe8c4268d02f71873102131fb6ed37ed9a upstream.

Remove 'static' modifier from the 'vid_hdr' local variable. I do not know
how it slipped in, but this is a bug and will break UBI if someone attaches
2 UBI volumes at the same time.

Artem: amended teh commit message, added -stable.

Signed-off-by: Richard Weinberger 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: Greg Kroah-Hartman

UBI: fix debugging messages

2012-01-26T00:13:25+00:00

commit 72f0d453d81d35087b1d3ad7c8285628c2be6e1d upstream.

Patch ab50ff684707031ed4bad2fdd313208ae392e5bb broke UBI debugging messages:
before that commit when UBI debugging was enabled, users saw few useful
debugging messages after attaching an MTD device. However, that patch turned
'dbg_msg()' into 'pr_debug()', so to enable the debugging messages users have
to enable them first via /sys/kernel/debug/dynamic_debug/control, which is
very impractical.

This commit makes 'dbg_msg()' to use 'printk()' instead of 'pr_debug()', just
as it was before the breakage.

Signed-off-by: Artem Bityutskiy 
Signed-off-by: Greg Kroah-Hartman

UBI: fix nameless volumes handling

2012-01-26T00:13:24+00:00

commit 4a59c797a18917a5cf3ff7ade296b46134d91e6a upstream.

Currently it's possible to create a volume without a name. E.g:
ubimkvol -n 32 -s 2MiB -t static /dev/ubi0 -N ""

After that vtbl_check() will always fail because it does not permit
empty strings.

Signed-off-by: Richard Weinberger 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: Greg Kroah-Hartman

UBI: fix use-after-free on error path

2012-01-26T00:13:17+00:00

commit e57e0d8e818512047fe379157c3f77f1b9fabffb upstream.

When we fail to erase a PEB, we free the corresponding erase entry object,
but then re-schedule this object if the error code was something like -EAGAIN.
Obviously, it is a bug to use the object after we have freed it.

Reported-by: Emese Revfy 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: Greg Kroah-Hartman

UBI: fix missing scrub when there is a bit-flip

2012-01-26T00:13:17+00:00

commit e801e128b2200c40a0ec236cf2330b2586b6e05a upstream.

Under some cases, when scrubbing the PEB if we did not get the lock on
the PEB it fails to scrub. Add that PEB again to the scrub list

Artem: minor amendments.

Signed-off-by: Bhavesh Parekh 
Signed-off-by: Artem Bityutskiy 
Signed-off-by: Greg Kroah-Hartman

Merge git://git.infradead.org/mtd-2.6

2011-11-07T17:11:16+00:00

* git://git.infradead.org/mtd-2.6: (226 commits)
  mtd: tests: annotate as DANGEROUS in Kconfig
  mtd: tests: don't use mtd0 as a default
  mtd: clean up usage of MTD_DOCPROBE_ADDRESS
  jffs2: add compr=lzo and compr=zlib options
  jffs2: implement mount option parsing and compression overriding
  mtd: nand: initialize ops.mode
  mtd: provide an alias for the redboot module name
  mtd: m25p80: don't probe device which has status of 'disabled'
  mtd: nand_h1900 never worked
  mtd: Add DiskOnChip G3 support
  mtd: m25p80: add EON flash EN25Q32B into spi flash id table
  mtd: mark block device queue as non-rotational
  mtd: r852: make r852_pm_ops static
  mtd: m25p80: add support for at25df321a spi data flash
  mtd: mxc_nand: preset_v1_v2: unlock all NAND flash blocks
  mtd: nand: switch `check_pattern()' to standard `memcmp()'
  mtd: nand: invalidate cache on unaligned reads
  mtd: nand: do not scan bad blocks with NAND_BBT_NO_OOB set
  mtd: nand: wait to set BBT version
  mtd: nand: scrub BBT on ECC errors
  ...

Fix up trivial conflicts:
 - arch/arm/mach-at91/board-usb-a9260.c
	Merged into board-usb-a926x.c
 - drivers/mtd/maps/lantiq-flash.c
	add_mtd_partitions -> mtd_device_register vs changed to use
	mtd_device_parse_register.

mtd: Add export.h for EXPORT_SYMBOL/THIS_MODULE where needed

2011-10-31T23:31:11+00:00

These two common macros will be no longer present everywhere.
Call out the include needs of them explicitly where required.

Signed-off-by: Paul Gortmaker

mtd: utilize `mtd_is_*()' functions

2011-09-21T06:19:06+00:00

Signed-off-by: Brian Norris 
Signed-off-by: Artem Bityutskiy

UBI: do not link debug messages when debugging is disabled

2011-08-19T16:02:27+00:00

Michal Marek spotted the same issue in UBIFS and this patch fixes UBI,
see "UBIFS: not build debug messages with CONFIG_UBIFS_FS_DEBUG disabled"

When UBI debugging is disabled, we have debugging messages defined as:

if (0)
	pr_debug()

But pr_debug macro defines data structures with debugging data and makes
the linux binary larger, even though we have "if (0)".

Signed-off-by: Artem Bityutskiy

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6

2011-07-23T02:02:39+00:00

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (107 commits)
  vfs: use ERR_CAST for err-ptr tossing in lookup_instantiate_filp
  isofs: Remove global fs lock
  jffs2: fix IN_DELETE_SELF on overwriting rename() killing a directory
  fix IN_DELETE_SELF on overwriting rename() on ramfs et.al.
  mm/truncate.c: fix build for CONFIG_BLOCK not enabled
  fs:update the NOTE of the file_operations structure
  Remove dead code in dget_parent()
  AFS: Fix silly characters in a comment
  switch d_add_ci() to d_splice_alias() in "found negative" case as well
  simplify gfs2_lookup()
  jfs_lookup(): don't bother with . or ..
  get rid of useless dget_parent() in btrfs rename() and link()
  get rid of useless dget_parent() in fs/btrfs/ioctl.c
  fs: push i_mutex and filemap_write_and_wait down into ->fsync() handlers
  drivers: fix up various ->llseek() implementations
  fs: handle SEEK_HOLE/SEEK_DATA properly in all fs's that define their own llseek
  Ext4: handle SEEK_HOLE/SEEK_DATA generically
  Btrfs: implement our own ->llseek
  fs: add SEEK_HOLE and SEEK_DATA flags
  reiserfs: make reiserfs default to barrier=flush
  ...

Fix up trivial conflicts in fs/xfs/linux-2.6/xfs_super.c due to the new
shrinker callout for the inode cache, that clashed with the xfs code to
start the periodic workers later.