linux-toradex.git/drivers/mtd, branch v4.9.27

ubi/upd: Always flush after prepared for an update

2017-04-27T07:10:38+00:00

commit 9cd9a21ce070be8a918ffd3381468315a7a76ba6 upstream.

In commit 6afaf8a484cb ("UBI: flush wl before clearing update marker") I
managed to trigger and fix a similar bug. Now here is another version of
which I assumed it wouldn't matter back then but it turns out UBI has a
check for it and will error out like this:

|ubi0 warning: validate_vid_hdr: inconsistent used_ebs
|ubi0 error: validate_vid_hdr: inconsistent VID header at PEB 592

All you need to trigger this is? "ubiupdatevol /dev/ubi0_0 file" + a
powercut in the middle of the operation.
ubi_start_update() sets the update-marker and puts all EBs on the erase
list. After that userland can proceed to write new data while the old EB
aren't erased completely. A powercut at this point is usually not that
much of a tragedy. UBI won't give read access to the static volume
because it has the update marker. It will most likely set the corrupted
flag because it misses some EBs.
So we are all good. Unless the size of the image that has been written
differs from the old image in the magnitude of at least one EB. In that
case UBI will find two different values for `used_ebs' and refuse to
attach the image with the error message mentioned above.

So in order not to get in the situation, the patch will ensure that we
wait until everything is removed before it tries to write any data.
The alternative would be to detect such a case and remove all EBs at the
attached time after we processed the volume-table and see the
update-marker set. The patch looks bigger and I doubt it is worth it
since usually the write() will wait from time to time for a new EB since
usually there not that many spare EB that can be used.

Signed-off-by: Sebastian Andrzej Siewior 
Signed-off-by: Richard Weinberger 
Signed-off-by: Greg Kroah-Hartman

mtd: bcm47xxpart: fix parsing first block after aligned TRX

2017-04-18T05:11:47+00:00

commit bd5d21310133921021d78995ad6346f908483124 upstream.

After parsing TRX we should skip to the first block placed behind it.
Our code was working only with TRX with length not aligned to the
blocksize. In other cases (length aligned) it was missing the block
places right after TRX.

This fixes calculation and simplifies the comment.

Signed-off-by: Rafał Miłecki 
Signed-off-by: Brian Norris 
Signed-off-by: Amit Pundir 
Signed-off-by: Greg Kroah-Hartman

mtd: pmcmsp: use kstrndup instead of kmalloc+strncpy

2017-03-18T11:14:28+00:00

commit 906b268477bc03daaa04f739844c120fe4dbc991 upstream.

kernelci.org reports a warning for this driver, as it copies a local
variable into a 'const char *' string:

    drivers/mtd/maps/pmcmsp-flash.c:149:30: warning: passing argument 1 of 'strncpy' discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers]

Using kstrndup() simplifies the code and avoids the warning.

Signed-off-by: Arnd Bergmann 
Acked-by: Marek Vasut 
Signed-off-by: Brian Norris 
Signed-off-by: Greg Kroah-Hartman

mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0

2017-03-12T05:41:52+00:00

commit 656441478ed55d960df5f3ccdf5a0f8c61dfd0b3 upstream.

The commit 7a654172161c ("mtd/ifc: Add support for IFC controller
version 2.0") added support for version 2.0 of the IFC controller.
The version 2.0 controller has the ECC status registers at a different
location to the previous versions.

Correct the fsl_ifc_nand structure so that the ECC status can be read
from the correct location for both version 1.0 and 2.0 of the controller.

Fixes: 7a654172161c ("mtd/ifc: Add support for IFC controller version 2.0")
Signed-off-by: Mark Marshall 
Signed-off-by: Boris Brezillon 
Signed-off-by: Greg Kroah-Hartman

mtd: spi-nor: Fix some error codes in cqspi_setup_flash()

2017-01-26T07:24:44+00:00

commit 10ad1d754a434c024ce7eeb1cec9f69fd3ecc863 upstream.

We return success or possibly uninitialized values on these error paths
instead of proper error codes.

Fixes: 140623410536 ("mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller")
Signed-off-by: Dan Carpenter 
Reviewed-by: Marek Vasut 
Reviewed-by: Moritz Fischer 
Signed-off-by: Cyrille Pitchen 
Signed-off-by: Greg Kroah-Hartman

mtd: spi-nor: Off by one in cqspi_setup_flash()

2017-01-26T07:24:44+00:00

commit 193e87143c290ec16838f5368adc0e0bc94eb931 upstream.

There are CQSPI_MAX_CHIPSELECT elements in the ->f_pdata array so the >
should be >=.

Fixes: 140623410536 ('mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller')
Signed-off-by: Dan Carpenter 
Reviewed-by: Marek Vasut 
Signed-off-by: Cyrille Pitchen 
Signed-off-by: Greg Kroah-Hartman

mtd: nand: xway: fix build because of module functions

2017-01-26T07:24:39+00:00

commit a2724663494f7313f53da10d8c0a729c5e3c4dea upstream.

Remove the usage of modules functions to make this driver compile
again. Otherwise an include of linux/modules.h would be needed.

Fixes: 024366750c2e ("mtd: nand: xway: convert to normal platform driver")
Signed-off-by: Hauke Mehrtens 
Signed-off-by: Boris Brezillon 
Signed-off-by: Greg Kroah-Hartman

mtd: nand: xway: disable module support

2017-01-26T07:24:38+00:00

commit 73529c872a189c747bdb528ce9b85b67b0e28dec upstream.

The xway_nand driver accesses the ltq_ebu_membase symbol which is not
exported. This also should not get exported and we should handle the
EBU interface in a better way later. This quick fix just deactivated
support for building as module.

Fixes: 99f2b107924c ("mtd: lantiq: Add NAND support on Lantiq XWAY SoC.")
Signed-off-by: Hauke Mehrtens 
Signed-off-by: Boris Brezillon 
Signed-off-by: Greg Kroah-Hartman

mtd: nand: lpc32xx: fix invalid error handling of a requested irq

2017-01-26T07:24:38+00:00

commit cf9e1672a66c49ed8903c01b4c380a2f2dc91b40 upstream.

Semantics of NR_IRQS is different on machines with SPARSE_IRQ option
disabled or enabled, in the latter case IRQs are allocated starting
at least from the value specified by NR_IRQS and going upwards, so
the check of (irq >= NR_IRQ) to decide about an error code returned by
platform_get_irq() is completely invalid, don't attempt to overrule
irq subsystem in the driver.

The change fixes LPC32xx NAND MLC driver initialization on boot.

Fixes: 8cb17b5ed017 ("irqchip: Add LPC32xx interrupt controller driver")
Signed-off-by: Vladimir Zapolskiy 
Acked-by: Sylvain Lemieux 
Signed-off-by: Boris Brezillon 
Signed-off-by: Greg Kroah-Hartman

Merge tag 'for-linus-20161104' of git://git.infradead.org/linux-mtd

2016-11-05T17:52:29+00:00

Pull MTD fixes from Brian Norris:

 - MAINTAINERS updates to reflect some new maintainers/submaintainers.

   We have some great volunteers who've been developing and reviewing
   already. We're going to try a group maintainership model, so
   eventually you'll probably see pull requests from people besides me.

 - NAND fixes from Boris:
    "Three simple fixes:

      - fix a non-critical bug in the gpmi driver
      - fix a bug in the 'automatic NAND timings selection' feature
        introduced in 4.9-rc1
      - fix a false positive uninitialized-var warning"

* tag 'for-linus-20161104' of git://git.infradead.org/linux-mtd:
  mtd: mtk: avoid warning in mtk_ecc_encode
  mtd: nand: Fix data interface configuration logic
  mtd: nand: gpmi: disable the clocks on errors
  MAINTAINERS: add more people to the MTD maintainer team
  MAINTAINERS: add a maintainer for the SPI NOR subsystem