linux-toradex.git/drivers/mtd, branch v6.12-rc4 Linux kernel for Apalis and Colibri modules move asm/unaligned.h to linux/unaligned.h 2024-10-02T21:23:23+00:00 Al Viro viro@zeniv.linux.org.uk 2024-10-01T19:35:57+00:00 5f60d5f6bbc12e782fac78110b0ee62698f3b576 asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h 
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.

auto-generated by the following:

for i in `git grep -l -w asm/unaligned.h`; do
	sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
	sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
[tree-wide] finally take no_llseek out 2024-09-27T15:18:43+00:00 Al Viro viro@zeniv.linux.org.uk 2024-09-27T01:56:11+00:00 cb787f4ac0c2e439ea8d7e6387b925f74576bdf8 no_llseek had been defined to NULL two years ago, in commit 868941b14441 ("fs: remove no_llseek") To quote that commit, At -rc1 we'll need do a mechanical removal of no_llseek - git grep -l -w no_llseek | grep -v porting.rst | while read i; do sed -i '/\<no_llseek\>/d' $i done would do it. Unfortunately, that hadn't been done. Linus, could you do that now, so that we could finally put that thing to rest? All instances are of the form .llseek = no_llseek, so it's obviously safe. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> 
no_llseek had been defined to NULL two years ago, in commit 868941b14441
("fs: remove no_llseek")

To quote that commit,

  At -rc1 we'll need do a mechanical removal of no_llseek -

  git grep -l -w no_llseek | grep -v porting.rst | while read i; do
	sed -i '/\<no_llseek\>/d' $i
  done

  would do it.

Unfortunately, that hadn't been done.  Linus, could you do that now, so
that we could finally put that thing to rest? All instances are of the
form
	.llseek = no_llseek,
so it's obviously safe.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc 2024-09-26T19:00:25+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-09-26T19:00:25+00:00 075dbe9f6e3c21596c5245826a4ee1f1c1676eb8 Pull SoC update from Arnd Bergmann: "Convert ep93xx to devicetree This concludes a long journey towards replacing the old board files with devictree description on the Cirrus Logic EP93xx platform. Nikita Shubin has been working on this for a long time, for details see the last post on https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/" * tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits) dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config net: cirrus: use u8 for addr to calm down sparse dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0 dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe() pinctrl: ep93xx: Fix raster pins typo spi: ep93xx: update kerneldoc comments for ep93xx_spi clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate() clk: ep93xx: add module license dmaengine: cirrus: remove platform code ASoC: cirrus: edb93xx: Delete driver ARM: ep93xx: soc: drop defines ARM: ep93xx: delete all boardfiles ata: pata_ep93xx: remove legacy pinctrl use pwm: ep93xx: drop legacy pinctrl ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms ARM: dts: ep93xx: Add EDB9302 DT ARM: dts: ep93xx: add ts7250 board ARM: dts: add Cirrus EP93XX SoC .dtsi ... 
Pull SoC update from Arnd Bergmann:
 "Convert ep93xx to devicetree

  This concludes a long journey towards replacing the old board files
  with devictree description on the Cirrus Logic EP93xx platform.

  Nikita Shubin has been working on this for a long time, for details
  see the last post on

    https://lore.kernel.org/lkml/20240909-ep93xx-v12-0-e86ab2423d4b@maquefel.me/"

* tag 'soc-ep93xx-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (47 commits)
  dt-bindings: gpio: ep9301: Add missing "#interrupt-cells" to examples
  MAINTAINERS: Update EP93XX ARM ARCHITECTURE maintainer
  soc: ep93xx: drop reference to removed EP93XX_SOC_COMMON config
  net: cirrus: use u8 for addr to calm down sparse
  dmaengine: cirrus: use snprintf() to calm down gcc 13.3.0
  dmaengine: ep93xx: Fix a NULL vs IS_ERR() check in probe()
  pinctrl: ep93xx: Fix raster pins typo
  spi: ep93xx: update kerneldoc comments for ep93xx_spi
  clk: ep93xx: Fix off by one in ep93xx_div_recalc_rate()
  clk: ep93xx: add module license
  dmaengine: cirrus: remove platform code
  ASoC: cirrus: edb93xx: Delete driver
  ARM: ep93xx: soc: drop defines
  ARM: ep93xx: delete all boardfiles
  ata: pata_ep93xx: remove legacy pinctrl use
  pwm: ep93xx: drop legacy pinctrl
  ARM: ep93xx: DT for the Cirrus ep93xx SoC platforms
  ARM: dts: ep93xx: Add EDB9302 DT
  ARM: dts: ep93xx: add ts7250 board
  ARM: dts: add Cirrus EP93XX SoC .dtsi
  ...
Merge tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm 2024-09-21T15:20:50+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-09-21T15:20:50+00:00 7856a565416e0cf091f825b0e25c7a1b7abb650e Pull non-MM updates from Andrew Morton: "Many singleton patches - please see the various changelogs for details. Quite a lot of nilfs2 work this time around. Notable patch series in this pull request are: - "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64() to provide (much) more accurate results. The current implementation was causing Uwe some issues in the PWM drivers. - "xz: Updates to license, filters, and compression options" from Lasse Collin. Miscellaneous maintenance and kinor feature work to the xz decompressor. - "Fix some GDB command error and add some GDB commands" from Kuan-Ying Lee. Fixes and enhancements to the gdb scripts. - "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of warnings about this. - "nilfs2: add support for some common ioctls" from Ryusuke Konishi. Adds various commonly-available ioctls to nilfs2. - "This series fixes a number of formatting issues in kernel doc comments" from Ryusuke Konishi does that. - "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke Konishi. Fix issues where -ENOENT was being unintentionally and inappropriately returned to userspace. - "nilfs2: assorted cleanups" from Huang Xiaojia. - "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke Konishi fixes some issues which can occur on corrupted nilfs2 filesystems. - "scripts/decode_stacktrace.sh: improve error reporting and usability" from Luca Ceresoli does those things" * tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits) list: test: increase coverage of list_test_list_replace*() list: test: fix tests for list_cut_position() proc: use __auto_type more treewide: correct the typo 'retun' ocfs2: cleanup return value and mlog in ocfs2_global_read_info() nilfs2: remove duplicate 'unlikely()' usage nilfs2: fix potential oob read in nilfs_btree_check_delete() nilfs2: determine empty node blocks as corrupted nilfs2: fix potential null-ptr-deref in nilfs_btree_insert() user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation tools/mm: rm thp_swap_allocator_test when make clean squashfs: fix percpu address space issues in decompressor_multi_percpu.c lib: glob.c: added null check for character class nilfs2: refactor nilfs_segctor_thread() nilfs2: use kthread_create and kthread_stop for the log writer thread nilfs2: remove sc_timer_task nilfs2: do not repair reserved inode bitmap in nilfs_new_inode() nilfs2: eliminate the shared counter and spinlock for i_generation nilfs2: separate inode type information from i_state field nilfs2: use the BITS_PER_LONG macro ... 
Pull non-MM updates from Andrew Morton:
 "Many singleton patches - please see the various changelogs for
  details.

  Quite a lot of nilfs2 work this time around.

  Notable patch series in this pull request are:

   - "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
     assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
     to provide (much) more accurate results. The current implementation
     was causing Uwe some issues in the PWM drivers.

   - "xz: Updates to license, filters, and compression options" from
     Lasse Collin. Miscellaneous maintenance and kinor feature work to
     the xz decompressor.

   - "Fix some GDB command error and add some GDB commands" from
     Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.

   - "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
     Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
     warnings about this.

   - "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
     Adds various commonly-available ioctls to nilfs2.

   - "This series fixes a number of formatting issues in kernel doc
     comments" from Ryusuke Konishi does that.

   - "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
     Konishi. Fix issues where -ENOENT was being unintentionally and
     inappropriately returned to userspace.

   - "nilfs2: assorted cleanups" from Huang Xiaojia.

   - "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
     Konishi fixes some issues which can occur on corrupted nilfs2
     filesystems.

   - "scripts/decode_stacktrace.sh: improve error reporting and
     usability" from Luca Ceresoli does those things"

* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
  list: test: increase coverage of list_test_list_replace*()
  list: test: fix tests for list_cut_position()
  proc: use __auto_type more
  treewide: correct the typo 'retun'
  ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
  nilfs2: remove duplicate 'unlikely()' usage
  nilfs2: fix potential oob read in nilfs_btree_check_delete()
  nilfs2: determine empty node blocks as corrupted
  nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
  user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
  tools/mm: rm thp_swap_allocator_test when make clean
  squashfs: fix percpu address space issues in decompressor_multi_percpu.c
  lib: glob.c: added null check for character class
  nilfs2: refactor nilfs_segctor_thread()
  nilfs2: use kthread_create and kthread_stop for the log writer thread
  nilfs2: remove sc_timer_task
  nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
  nilfs2: eliminate the shared counter and spinlock for i_generation
  nilfs2: separate inode type information from i_state field
  nilfs2: use the BITS_PER_LONG macro
  ...
Merge tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel 2024-09-19T08:18:15+00:00 Linus Torvalds torvalds@linux-foundation.org 2024-09-19T08:18:15+00:00 de848da12f752170c2ebe114804a985314fd5a6a Pull drm updates from Dave Airlie: "This adds a couple of patches outside the drm core, all should be acked appropriately, the string and pstore ones are the main ones that come to mind. Otherwise it's the usual drivers, xe is getting enabled by default on some new hardware, we've changed the device number handling to allow more devices, and we added some optional rust code to create QR codes in the panic handler, an idea first suggested I think 10 years ago :-) string: - add mem_is_zero() core: - support more device numbers - use XArray for minor ids - add backlight constants - Split dma fence array creation into alloc and arm fbdev: - remove usage of old fbdev hooks kms: - Add might_fault() to drm_modeset_lock priming - Add dynamic per-crtc vblank configuration support dma-buf: - docs cleanup buddy: - Add start address support for trim function printk: - pass description to kmsg_dump scheduler: - Remove full_recover from drm_sched_start ttm: - Make LRU walk restartable after dropping locks - Allow direct reclaim to allocate local memory panic: - add display QR code (in rust) displayport: - mst: GUID improvements bridge: - Silence error message on -EPROBE_DEFER - analogix: Clean aup - bridge-connector: Fix double free - lt6505: Disable interrupt when powered off - tc358767: Make default DP port preemphasis configurable - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR - anx7625: simplify OF array handling - dw-hdmi: simplify clock handling - lontium-lt8912b: fix mode validation - nwl-dsi: fix mode vsync/hsync polarity xe: - Enable LunarLake and Battlemage support - Introducing Xe2 ccs modifiers for integrated and discrete graphics - rename xe perf to xe observation - use wb caching on DGFX for system memory - add fence timeouts - Lunar Lake graphics/media/display workarounds - Battlemage workarounds - Battlemage GSC support - GSC and HuC fw updates for LL/BM - use dma_fence_chain_free - refactor hw engine lookup and mmio access - enable priority mem read for Xe2 - Add first GuC BMG fw - fix dma-resv lock - Fix DGFX display suspend/resume - Use xe_managed for kernel BOs - Use reserved copy engine for user binds on faulting devices - Allow mixing dma-fence jobs and long-running faulting jobs - fix media TLB invalidation - fix rpm in TTM swapout path - track resources and VF state by PF i915: - Type-C programming fix for MTL+ - FBC cleanup - Calc vblank delay more accurately - On DP MST, Enable LT fallback for UHBR<->non-UHBR rates - Fix DP LTTPR detection - limit relocations to INT_MAX - fix long hangs in buddy allocator on DG2/A380 amdgpu: - Per-queue reset support - SDMA devcoredump support - DCN 4.0.1 updates - GFX12/VCN4/JPEG4 updates - Convert vbios embedded EDID to drm_edid - GFX9.3/9.4 devcoredump support - process isolation framework for GFX 9.4.3/4 - take IOMMU mappings into account for P2P DMA amdkfd: - CRIU fixes - HMM fix - Enable process isolation support for GFX 9.4.3/4 - Allow users to target recommended SDMA engines - KFD support for targetting queues on recommended SDMA engines radeon: - remove .load and drm_dev_alloc - Fix vbios embedded EDID size handling - Convert vbios embedded EDID to drm_edid - Use GEM references instead of TTM - r100 cp init cleanup - Fix potential overflows in evergreen CS offset tracking msm: - DPU: - implement DP/PHY mapping on SC8180X - Enable writeback on SM8150, SC8180X, SM6125, SM6350 - DP: - Enable widebus on all relevant chipsets - MSM8998 HDMI support - GPU: - A642L speedbin support - A615/A306/A621 support - A7xx devcoredump support ast: - astdp: Support AST2600 with VGA - Clean up HPD - Fix timeout loop for DP link training - reorganize output code by type (VGA, DP, etc) - convert to struct drm_edid - fix BMC handling for all outputs exynos: - drop stale MAINTAINERS pattern - constify struct loongson: - use GEM refcount over TTM mgag200: - Improve BMC handling - Support VBLANK intterupts - transparently support BMC outputs nouveau: - Refactor and clean up internals - Use GEM refcount over TTM's gm12u320: - convert to struct drm_edid gma500: - update i2c terms lcdif: - pixel clock fix host1x: - fix syncpoint IRQ during resume - use iommu_paging_domain_alloc() imx: - ipuv3: convert to struct drm_edid omapdrm: - improve error handling - use common helper for_each_endpoint_of_node() panel: - add support for BOE TV101WUM-LL2 plus DT bindings - novatek-nt35950: improve error handling - nv3051d: improve error handling - panel-edp: - add support for BOE NE140WUM-N6G - revert support for SDC ATNA45AF01 - visionox-vtdr6130: - improve error handling - use devm_regulator_bulk_get_const() - boe-th101mb31ig002: - Support for starry-er88577 MIPI-DSI panel plus DT - Fix porch parameter - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2, CMN N116BCP-EA2, CSW MNB601LS1-4 - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT - jd9365da: - Support Melfas lmfbx101117480 MIPI-DSI panel plus DT - Refactor for code sharing - panel-edp: fix name for HKC MB116AN01 - jd9365da: fix "exit sleep" commands - jdi-fhd-r63452: simplify error handling with DSI multi-style helpers - mantix-mlaf057we51: simplify error handling with DSI multi-style helpers - simple: - support Innolux G070ACE-LH3 plus DT bindings - support On Tat Industrial Company KD50G21-40NT-A1 plus DT bindings - st7701: - decouple DSI and DRM code - add SPI support - support Anbernic RG28XX plus DT bindings mediatek: - support alpha blending - remove cl in struct cmdq_pkt - ovl adaptor fix - add power domain binding for mediatek DPI controller renesas: - rz-du: add support for RZ/G2UL plus DT bindings rockchip: - Improve DP sink-capability reporting - dw_hdmi: Support 4k@60Hz - vop: - Support RGB display on Rockchip RK3066 - Support 4096px width sti: - convert to struct drm_edid stm: - Avoid UAF wih managed plane and CRTC helpers - Fix module owner - Fix error handling in probe - Depend on COMMON_CLK - ltdc: - Fix transparency after disabling plane - Remove unused interrupt tegra: - gr3d: improve PM domain handling - convert to struct drm_edid - Call drm_atomic_helper_shutdown() vc4: - fix PM during detect - replace DRM_ERROR() with drm_error() - v3d: simplify clock retrieval v3d: - Clean up perfmon virtio: - add DRM capset" * tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits) drm/xe: Fix missing conversion to xe_display_pm_runtime_resume drm/xe/xe2hpg: Add Wa_15016589081 drm/xe: Don't keep stale pointer to bo->ggtt_node drm/xe: fix missing 'xe_vm_put' drm/xe: fix build warning with CONFIG_PM=n drm/xe: Suppress missing outer rpm protection warning drm/xe: prevent potential UAF in pf_provision_vf_ggtt() drm/amd/display: Add all planes on CRTC to state for overlay cursor drm/i915/bios: fix printk format width drm/i915/display: Fix BMG CCS modifiers drm/amdgpu: get rid of bogus includes of fdtable.h drm/amdkfd: CRIU fixes drm/amdgpu: fix a race in kfd_mem_export_dmabuf() drm: new helper: drm_gem_prime_handle_to_dmabuf() drm/amdgpu/atomfirmware: Silence UBSAN warning drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare' drm/amd/amdgpu: apply command submission parser for JPEG v1 drm/amd/amdgpu: apply command submission parser for JPEG v2+ drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3 drm/amd/pm: update the features set on smu v14.0.2/3 ... 
Pull drm updates from Dave Airlie:
 "This adds a couple of patches outside the drm core, all should be
  acked appropriately, the string and pstore ones are the main ones that
  come to mind.

  Otherwise it's the usual drivers, xe is getting enabled by default on
  some new hardware, we've changed the device number handling to allow
  more devices, and we added some optional rust code to create QR codes
  in the panic handler, an idea first suggested I think 10 years ago :-)

  string:
   - add mem_is_zero()

  core:
   - support more device numbers
   - use XArray for minor ids
   - add backlight constants
   - Split dma fence array creation into alloc and arm

  fbdev:
   - remove usage of old fbdev hooks

  kms:
   - Add might_fault() to drm_modeset_lock priming
   - Add dynamic per-crtc vblank configuration support

  dma-buf:
   - docs cleanup

  buddy:
   - Add start address support for trim function

  printk:
   - pass description to kmsg_dump

  scheduler:
   - Remove full_recover from drm_sched_start

  ttm:
   - Make LRU walk restartable after dropping locks
   - Allow direct reclaim to allocate local memory

  panic:
   - add display QR code (in rust)

  displayport:
   - mst: GUID improvements

  bridge:
   - Silence error message on -EPROBE_DEFER
   - analogix: Clean aup
   - bridge-connector: Fix double free
   - lt6505: Disable interrupt when powered off
   - tc358767: Make default DP port preemphasis configurable
   - lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
   - anx7625: simplify OF array handling
   - dw-hdmi: simplify clock handling
   - lontium-lt8912b: fix mode validation
   - nwl-dsi: fix mode vsync/hsync polarity

  xe:
   - Enable LunarLake and Battlemage support
   - Introducing Xe2 ccs modifiers for integrated and discrete graphics
   - rename xe perf to xe observation
   - use wb caching on DGFX for system memory
   - add fence timeouts
   - Lunar Lake graphics/media/display workarounds
   - Battlemage workarounds
   - Battlemage GSC support
   - GSC and HuC fw updates for LL/BM
   - use dma_fence_chain_free
   - refactor hw engine lookup and mmio access
   - enable priority mem read for Xe2
   - Add first GuC BMG fw
   - fix dma-resv lock
   - Fix DGFX display suspend/resume
   - Use xe_managed for kernel BOs
   - Use reserved copy engine for user binds on faulting devices
   - Allow mixing dma-fence jobs and long-running faulting jobs
   - fix media TLB invalidation
   - fix rpm in TTM swapout path
   - track resources and VF state by PF

  i915:
   - Type-C programming fix for MTL+
   - FBC cleanup
   - Calc vblank delay more accurately
   - On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
   - Fix DP LTTPR detection
   - limit relocations to INT_MAX
   - fix long hangs in buddy allocator on DG2/A380

  amdgpu:
   - Per-queue reset support
   - SDMA devcoredump support
   - DCN 4.0.1 updates
   - GFX12/VCN4/JPEG4 updates
   - Convert vbios embedded EDID to drm_edid
   - GFX9.3/9.4 devcoredump support
   - process isolation framework for GFX 9.4.3/4
   - take IOMMU mappings into account for P2P DMA

  amdkfd:
   - CRIU fixes
   - HMM fix
   - Enable process isolation support for GFX 9.4.3/4
   - Allow users to target recommended SDMA engines
   - KFD support for targetting queues on recommended SDMA engines

  radeon:
   - remove .load and drm_dev_alloc
   - Fix vbios embedded EDID size handling
   - Convert vbios embedded EDID to drm_edid
   - Use GEM references instead of TTM
   - r100 cp init cleanup
   - Fix potential overflows in evergreen CS offset tracking

  msm:
   - DPU:
      - implement DP/PHY mapping on SC8180X
      - Enable writeback on SM8150, SC8180X, SM6125, SM6350
   - DP:
      - Enable widebus on all relevant chipsets
      - MSM8998 HDMI support
   - GPU:
      - A642L speedbin support
      - A615/A306/A621 support
      - A7xx devcoredump support

  ast:
   - astdp: Support AST2600 with VGA
   - Clean up HPD
   - Fix timeout loop for DP link training
   - reorganize output code by type (VGA, DP, etc)
   - convert to struct drm_edid
   - fix BMC handling for all outputs

  exynos:
   - drop stale MAINTAINERS pattern
   - constify struct

  loongson:
   - use GEM refcount over TTM

  mgag200:
   - Improve BMC handling
   - Support VBLANK intterupts
   - transparently support BMC outputs

  nouveau:
   - Refactor and clean up internals
   - Use GEM refcount over TTM's

  gm12u320:
   - convert to struct drm_edid

  gma500:
   - update i2c terms

  lcdif:
   - pixel clock fix

  host1x:
   - fix syncpoint IRQ during resume
   - use iommu_paging_domain_alloc()

  imx:
   - ipuv3: convert to struct drm_edid

  omapdrm:
   - improve error handling
   - use common helper for_each_endpoint_of_node()

  panel:
   - add support for BOE TV101WUM-LL2 plus DT bindings
   - novatek-nt35950: improve error handling
   - nv3051d: improve error handling
   - panel-edp:
      - add support for BOE NE140WUM-N6G
      - revert support for SDC ATNA45AF01
   - visionox-vtdr6130:
      - improve error handling
      - use devm_regulator_bulk_get_const()
   - boe-th101mb31ig002:
      - Support for starry-er88577 MIPI-DSI panel plus DT
      - Fix porch parameter
   - edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
     NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
     CMN N116BCP-EA2, CSW MNB601LS1-4
   - himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
   - ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
   - jd9365da:
      - Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
      - Refactor for code sharing
   - panel-edp: fix name for HKC MB116AN01
   - jd9365da: fix "exit sleep" commands
   - jdi-fhd-r63452: simplify error handling with DSI multi-style
     helpers
   - mantix-mlaf057we51: simplify error handling with DSI multi-style
     helpers
   - simple:
      - support Innolux G070ACE-LH3 plus DT bindings
      - support On Tat Industrial Company KD50G21-40NT-A1 plus DT
        bindings
   - st7701:
      - decouple DSI and DRM code
      - add SPI support
      - support Anbernic RG28XX plus DT bindings

  mediatek:
   - support alpha blending
   - remove cl in struct cmdq_pkt
   - ovl adaptor fix
   - add power domain binding for mediatek DPI controller

  renesas:
   - rz-du: add support for RZ/G2UL plus DT bindings

  rockchip:
   - Improve DP sink-capability reporting
   - dw_hdmi: Support 4k@60Hz
   - vop:
      - Support RGB display on Rockchip RK3066
      - Support 4096px width

  sti:
   - convert to struct drm_edid

  stm:
   - Avoid UAF wih managed plane and CRTC helpers
   - Fix module owner
   - Fix error handling in probe
   - Depend on COMMON_CLK
   - ltdc:
      - Fix transparency after disabling plane
      - Remove unused interrupt

  tegra:
   - gr3d: improve PM domain handling
   - convert to struct drm_edid
   - Call drm_atomic_helper_shutdown()

  vc4:
   - fix PM during detect
   - replace DRM_ERROR() with drm_error()
   - v3d: simplify clock retrieval

  v3d:
   - Clean up perfmon

  virtio:
   - add DRM capset"

* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
  drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
  drm/xe/xe2hpg: Add Wa_15016589081
  drm/xe: Don't keep stale pointer to bo->ggtt_node
  drm/xe: fix missing 'xe_vm_put'
  drm/xe: fix build warning with CONFIG_PM=n
  drm/xe: Suppress missing outer rpm protection warning
  drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
  drm/amd/display: Add all planes on CRTC to state for overlay cursor
  drm/i915/bios: fix printk format width
  drm/i915/display: Fix BMG CCS modifiers
  drm/amdgpu: get rid of bogus includes of fdtable.h
  drm/amdkfd: CRIU fixes
  drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
  drm: new helper: drm_gem_prime_handle_to_dmabuf()
  drm/amdgpu/atomfirmware: Silence UBSAN warning
  drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
  drm/amd/amdgpu: apply command submission parser for JPEG v1
  drm/amd/amdgpu: apply command submission parser for JPEG v2+
  drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
  drm/amd/pm: update the features set on smu v14.0.2/3
  ...
Merge tag 'nand/for-6.12' into mtd/next 2024-09-15T10:38:22+00:00 Miquel Raynal miquel.raynal@bootlin.com 2024-09-15T10:38:22+00:00 869acb874f2b61c34063b677c2bd29595bf446a1 * Raw NAND changes The use of for_each_child_of_node_scoped() has been spread into the subsystem drivers. Aside from that, a couple of exit path have been fixed (mtk, denali), the TI GPMC bindings have been enhanced to comply with up-to-date partition descriptions and as always there is a load of small and misc fixes. * SPI-NAND changes The most impacting series this cycle is bringing support for continuous reads in the SPI-NAND subsystem. This is a feature already merged in the raw NAND subsystem which allows optimizing the internal fetch times in the chip while reading sequential pages within an eraseblock. For now only Macronix NANDs benefit from this feature. While we are talking about Macronix, some of their chip need an explicit action for selecting a different plane, and support for it has also been brought. The bitflip threshold has also been set to the same arbitrary level as in the raw NAND subsystem to optimize wear leveling decisions, and finally support for a new Winbond chip has been added. 
* Raw NAND changes

The use of for_each_child_of_node_scoped() has been spread into the
subsystem drivers. Aside from that, a couple of exit path have been
fixed (mtk, denali), the TI GPMC bindings have been enhanced to comply
with up-to-date partition descriptions and as always there is a load of
small and misc fixes.

* SPI-NAND changes

The most impacting series this cycle is bringing support for continuous
reads in the SPI-NAND subsystem. This is a feature already merged in the
raw NAND subsystem which allows optimizing the internal fetch times in
the chip while reading sequential pages within an eraseblock. For now
only Macronix NANDs benefit from this feature. While we are talking
about Macronix, some of their chip need an explicit action for selecting
a different plane, and support for it has also been brought.

The bitflip threshold has also been set to the same arbitrary level as
in the raw NAND subsystem to optimize wear leveling decisions, and
finally support for a new Winbond chip has been added.
Merge tag 'spi-nor/for-6.12' into mtd/next 2024-09-15T10:37:29+00:00 Miquel Raynal miquel.raynal@bootlin.com 2024-09-15T10:37:29+00:00 5d09909a1995e3b6565d33f31b0d86d1cf2124ff SPI NOR changes for 6.12 Notable changes: - Add Write Protect support for N25Q064A. - New flash support for Zetta ZD25Q128C and Spansion S28HS256T. - Fix a NULL dereference in probe path for flashes without a name. The probe path tries to access the name without checking its existence first. S28HS256T is the first flash to define its entry without a name, uncovering this issue. 
SPI NOR changes for 6.12

Notable changes:

- Add Write Protect support for N25Q064A.

- New flash support for Zetta ZD25Q128C and Spansion S28HS256T.

- Fix a NULL dereference in probe path for flashes without a name. The
  probe path tries to access the name without checking its existence
  first. S28HS256T is the first flash to define its entry without a
  name, uncovering this issue.
mtd: spi-nor: fix flash probing 2024-09-14T15:56:31+00:00 Michael Walle mwalle@kernel.org 2024-09-09T07:28:54+00:00 ac5bfa968b60fba409942ab594ad98479b4e1223 Fix flash probing by name. Flash entries without a name are allowed since commit 15eb8303bb42 ("mtd: spi-nor: mark the flash name as obsolete"). But it was just until recently that a flash entry without a name was actually introduced. This triggers a bug in the legacy probe by name path. Skip entries without a name to fix it. Fixes: 2095e7da8049 ("mtd: spi-nor: spansion: Add support for S28HS256T") Reported-by: Jon Hunter <jonathanh@nvidia.com> Closes: https://lore.kernel.org/r/66c8ebb0-1324-4ad9-9926-8d4eb7e1e63a@nvidia.com/ Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20240909072854.812206-1-mwalle@kernel.org 
Fix flash probing by name. Flash entries without a name are allowed
since commit 15eb8303bb42 ("mtd: spi-nor: mark the flash name as
obsolete"). But it was just until recently that a flash entry without a
name was actually introduced. This triggers a bug in the legacy probe by
name path. Skip entries without a name to fix it.

Fixes: 2095e7da8049 ("mtd: spi-nor: spansion: Add support for S28HS256T")
Reported-by: Jon Hunter <jonathanh@nvidia.com>
Closes: https://lore.kernel.org/r/66c8ebb0-1324-4ad9-9926-8d4eb7e1e63a@nvidia.com/
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240909072854.812206-1-mwalle@kernel.org
mtd: spi-nor: spansion: Add support for S28HS256T 2024-09-14T15:56:31+00:00 Takahiro Kuwano Takahiro.Kuwano@infineon.com 2024-08-30T08:04:28+00:00 1dc6cd4f94ad5c9432dc7c7a1e1ed6c52ec856ad Infineon S28HS256T is 256Mb Octal SPI device which has same functionalities with 512Mb and 1Gb parts. Link: https://www.infineon.com/dgdl/Infineon-S28HS256T_S28HL256T_256Mb_SEMPER_Flash_Octal_interface_1_8V_3-DataSheet-v02_00-EN.pdf?fileId=8ac78c8c8fc2dd9c018fc66787aa0657 Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Reviewed-by: Michael Walle <mwalle@kernel.org> Signed-off-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20240830080428.6994-1-Takahiro.Kuwano@infineon.com 
Infineon S28HS256T is 256Mb Octal SPI device which has same
functionalities with 512Mb and 1Gb parts.

Link: https://www.infineon.com/dgdl/Infineon-S28HS256T_S28HL256T_256Mb_SEMPER_Flash_Octal_interface_1_8V_3-DataSheet-v02_00-EN.pdf?fileId=8ac78c8c8fc2dd9c018fc66787aa0657
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240830080428.6994-1-Takahiro.Kuwano@infineon.com
mtd: spi-nor: winbond: add Zetta ZD25Q128C support 2024-09-14T15:56:31+00:00 Michael Walle mwalle@kernel.org 2024-08-04T22:15:35+00:00 a84d45217c8fbfab3f522dc84767f7f08ab1a85e Zetta normally uses BAh as its vendor ID. But for the ZD25Q128C they took the one from Winbond and messed up the size parameters in SFDP. Most functions seem compatible with the W25Q128, we just have to fix up the size. Link: http://www.zettadevice.com/upload/file/20150821/DS_Zetta_25Q128_RevA.pdf Link: https://www.lcsc.com/datasheet/lcsc_datasheet_2312081757_Zetta-ZD25Q128CSIGT_C19626875.pdf Signed-off-by: Michael Walle <mwalle@kernel.org> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Signed-off-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20240804221535.291923-1-mwalle@kernel.org 
Zetta normally uses BAh as its vendor ID. But for the ZD25Q128C they
took the one from Winbond and messed up the size parameters in SFDP.
Most functions seem compatible with the W25Q128, we just have to fix up
the size.

Link: http://www.zettadevice.com/upload/file/20150821/DS_Zetta_25Q128_RevA.pdf
Link: https://www.lcsc.com/datasheet/lcsc_datasheet_2312081757_Zetta-ZD25Q128CSIGT_C19626875.pdf
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Pratyush Yadav <pratyush@kernel.org>
Signed-off-by: Pratyush Yadav <pratyush@kernel.org>
Link: https://lore.kernel.org/r/20240804221535.291923-1-mwalle@kernel.org